What do you mean by 2.6 the volume? What does the Value mean and how do you use the value? Is it how many hours you cold crash for? Do you need to keep the CO2 cylinder connected at the same time? So many questions 😊
@GentleGiantFan6 күн бұрын
When will these be available in the US and Canada? These look like a pressure ferment capable version of the Fermonster. I have a Fermzilla All Rounder, and while I like it, I hate how cumbersome it is when it comes to the body, base, and the strapping used to hold it all together. That and the body is a lot wider than a standard carboy. Other than those two things, I've been happy with the All Rounder. This looks like the best of both worlds. The size of a Fermonster and pressure fermenting capability of the All Rounder. They would sell well over here.
@Keg-King3 күн бұрын
We're still working to reconnect with the US market. Let your nearest wholesaler know you want them so they'll place an order. You're not the only one waiting!
@Keepingthefaith7210 күн бұрын
Background music, Interferes with listening to the audio .....
@teofiloljubisavljevic794311 күн бұрын
Dont got one
@Keg-King10 күн бұрын
Then do it for yourself! You deserve the best!
@carlwyatt503611 күн бұрын
Hi fella ,do I need co2 cannister to make this work ,or can I produce it without cannister ,if you know what I mean Carl
@Keg-King10 күн бұрын
You can always ferment under pressure or not and then if you don't have a CO2 cylinder and reg you can do this to fill bottles: kzbin.info/www/bejne/g4OVZGWhZbSVm9ksi=kROjdSDNhlEXDxPl
@dannymars13 күн бұрын
My bench is about 25mm too tall. Is it possible to get a longer one??
@dannymars13 күн бұрын
Haha, just watched further along and seen your suggestions. Will give it a go.
@churgin25 күн бұрын
Excellemt explanations.
@Keg-King24 күн бұрын
Cheers and thanks for letting us know.
@jonathanritter7364Ай бұрын
So if my coupler has the duck bill valve installed and I want to depressurize my keg am I able to do it with that valve installed? I imagine if I loosen that nut it will loosen the valve and allow CO2 to escape out from around the valve
@Keg-King29 күн бұрын
Exactly. Sometimes the duckbill valve has a washer type flange to it that will loose its seal when the nut on the coupler's gas inlet port is loosened.
@guyk537Ай бұрын
Is it essential to use a CO2 gas bottle with this counter pressure tap or could you use CO2 in a keg harvested from a pressure fermenter?
@Keg-KingАй бұрын
It will work best to balance the pressure and provide a purge to each bottle. If you can make it work with your pressurised keg idea, great, but it sounds like you're making the keg do what the cylinder already does. If you find this works to save you gas and money, then perfect!
@vidarbentestuen3819Ай бұрын
When will this lid be available?
@JohnDoe-es5xhАй бұрын
I got a spundy from keg king and it lacks the metal ring next to the regulation knob. 😞
@Keg-KingАй бұрын
Johno. There has never been a metal ring included with the Spundy. www.kegking.com.au/spundy-compact-spunding-valve.html
@theblade66Ай бұрын
Great video
@Keg-KingАй бұрын
Cheers and thanks for letting us know. There's even more new pressure fermenters and spunding devices in our range now. Check them out!
@the4thjАй бұрын
No more RoboBrew?
@Keg-KingАй бұрын
Matey, Matey Matey. Where have you been?
@timwood8733Ай бұрын
fantastic product -well done
@marcelchaloupkaАй бұрын
Definitely want one albeit the chilli is bigger than I thought.
@AndrewLynch9Ай бұрын
Need to get Bevvie to import this to the UK. Would love to get one for my Apollo uni fermenter!
@junyang3937Ай бұрын
Great product 🎉🎉🎉 fermenting in a kegerator is killing my limited garage space, and now problem solved. What’s more beautiful is now I can carry my kegs to anywhere and serve them icy cold, regardless the sizes of them. Absolutely genius!!!
@kenfowler1980Ай бұрын
This is brilliant! And 10 litre wort kits as well! Wow! And I thought Daniel missed the yeast deliberately :) so when do the 10 litre kits come out?
@kelixjoeАй бұрын
Thank you for this awesome video, Daniel and Jack! The Kegmate looks like a game-changer for anyone who loves serving fresh beer effortlessly. Last week, I bought a keg tap from Mumm Products, and it is fantastic and super easy to use.
@Keg-KingАй бұрын
Thanks for letting us know! Keep The Kegs Flowing! Cheers
@shanej2429Ай бұрын
Haha, eggplant in the bottom right.😂
@marcelchaloupkaАй бұрын
I want one
@PeterPavlovic-gl8lxАй бұрын
I have the old one and use my keg washer which cleans very well
@devilmaycare2809Ай бұрын
@@PeterPavlovic-gl8lx That was my problem with the old chubby you really needed a keg washer (more expense) to clean it properly, where a all rounder was easy to clean by hand.
@Keg-KingАй бұрын
Nice work Peter! Toatally agree. Keg Washers make home brewery life so much more enjoyable because cleaning equipment and kegs becomes a background activity. Anyone who has a few ball lock kegs and other ball lock equipment should get one. They aren't expensive and they do the work of cleaning for you while you do other things. Easy!
@beetlejuice1989Ай бұрын
Anyone tried these? Are they the same as the grain and grape kits?
@kenfowler1980Ай бұрын
Excellent work!
@justinwiechmanАй бұрын
Do you happen to know what is the highest Volume of Carbon Dioxide you can get from a soda stream or how you can estimate it or even test it for cheap.
@Pierre-OlivierMenottiАй бұрын
Does the fermenter is meant to ferment 30L or the capaity of it is 30L ?
@Keg-KingАй бұрын
capacity is 30L
@stevecoppins6554Ай бұрын
Noticed you didn't show putting the tubing on the connects , which is an absolute PITA .
@Keg-KingАй бұрын
you can try using MFL disconnects with push-in fittings like these if you want to make things easier. www.kegking.com.au/female-adaptor-5-16-tube-x-7-16-20-unf-v-type.html
@stevecoppins6554Ай бұрын
@@Keg-King well they may have been a pig to get them on , but they sure ain't going to blow off .
@gavanwhatever8196Ай бұрын
I made my first brew in 1975 in an earthenware bowl with a teatowel over it. Unsurprisingly, it was terrible! Second brew onwards I've used a barrel fermenter like the one on the right. Currently, the consumables cost comes out at about $1.50 per litre. Doesn't take long to recoup capital costs at that price!
@willfiala1859Ай бұрын
You made laugh guys - lets get the masses fermenting and take our minds away from all the daily negatives
@brewingbadTNАй бұрын
Man, this was so cheesy…..I loved it!
@kenfowler1980Ай бұрын
Looks great well done!
@kenfowler1980Ай бұрын
Very entertaining!
@chrisb5839Ай бұрын
When will the Junior Fermenter jacket be available in the UK?
@jeffbguarino2 ай бұрын
I get my small bottles filled for $10 with exchange and the larger cylinders can be purchased but they have a lifespan. A date is stamped , so they only last so many years and you have to buy a new one. Not only that, you can't get all the gas out because the pressure drops and you are left with about 25% or so unusable. I did the math and the small bottles might be slightly more expensive but they don't expire. If you factor in the cost of the larger cylinders they end up being more expensive overall. In the small cylinders you can get most of the gas out and I weighed mine full and empty and I am getting most of the gas out. So I scrapped the idea and just have 3 small bottles and refill them all at once every few months. I don't have to buy the adapter hose and find a place to hide a large cylinder in my kitchen and drill holes to route the tubing to my soda stream.
@Keg-KingАй бұрын
Hi Jeff. That's not accurate. Where we are located the larger cylinders are a massive savings. The cylinders have to be purchased and are already full on the first go, but there after, if you for some reason or another want keep the cylinder and have it refilled after you empty it you can do so for 10 years from the test stamp date on an AS2030 cylinder with an RPV installed in the valve. ALL the filled gas can be expelled from the cylinder. If your draft system or carbonation unit is working properly, the entire weight of the gas will be dispensed. So with our cylinder, the sizes are 0.9 2.6 and 6 kilo. These are the weights of the gas itself that the cylinder can hold inside. Beyond this, most customer will simply just swap their empty cylinder for a full one at any of these locations: www.kegking.com.au/retailers/ This way they only pay the fill price, currently $29 AUD for 2.6kilo, and as long as they have a cylinder to drop off, they'll be able swap for a full cylinder far beyond the 10 years of life of the original cylinder.
@mr.blackhawk142Ай бұрын
Jeff, thanx for sharing that! I've been refilling the stock Sodastream bottle for a few years now, no problems. Just last week (July ) I took it in and they said it's better to CHILL the bottle before refilling? What is the truth about that? Actually one guy at the store said it doesn't matter, but another employee insisted I leave the bottle with them to refrigerate then fill. Of course I FORGOT to pick it up and now I want to fix a drink and NO SODA! Sometimes it seems that Murphy's Law is the ONLY law that applies to me! :P
@rodrigoruizsauza2 ай бұрын
It can be used with a dip tube cylinder?
@chrisb58392 ай бұрын
Will a heat mat work with these fermenters if placed beneath it?
@Keg-King2 ай бұрын
Yes. Absolutely. And we improved the Chubby since this video and now offer the Chubby Apollo. There's even a stainless steel lid option for it: Chubby Apollo: kzbin.info/www/bejne/gIjMh6SAlKuhn8ksi=E7Thomzx47q5pXn- SS LID OPTION: kzbin.info/www/bejne/rnLLeKpjpK-pldUsi=Tb-HJRCspnKNiC-a
@chrisb58392 ай бұрын
@@Keg-King when will these be available in the UK?
@Keg-King2 ай бұрын
@@chrisb5839 Bevie is our distributor in the UK. They will have stock soon. They'll announce when they arrive. There is already stock in the EU as well.
@markdevenney55842 ай бұрын
Curious to know is the original Chubby 30L dishwasher safe?
@Keg-King2 ай бұрын
The caps and components are dishwasher safe. The tanks are not.
@rikochag59642 ай бұрын
Impeccable, en français, merci keg king ❤
@thumpdrum2 ай бұрын
I would love this but outside of home brew applications, are macro brews going to make 10L kegs? Historically, the USA does not deviate from standard kegs, bottles or cans. On occassion you can find 5L but its Heineken pre-pressured.
@Keg-King2 ай бұрын
We have more beverage makers already packaging in these in Australia and it isn't just beer, it's juice, wine, cocktails and more. Prosecco and Rose come to mind as pretty popular in their 10L varieties. Our market down under tends to embrace packaging options faster than the US industries. We moved to screw caps and bagged boxes for wines decades ago now and never looked back so where Americans still tend to see these options as an indication of low quality, Australians have no qualm about packing their $140 dollar bottles of wine in a screw top bottle. When it comes down to it, it's all about keeping the O2 out and providing the beverage producer with affordable options to reach a wider market. That said, do you remember Bud Light/Coors Light Party Balls in the US? The 10L keg dispenses better, is easier to carry and equally as fun!
@willfiala18592 ай бұрын
US generally gets further behind and so we don't have many hopes to sell there
@DaveGraffiti1082 ай бұрын
lm sold on Kegking, just made my first 30ltr Chubby pressure fermentation batch
@Keg-King2 ай бұрын
Thanks! It's always great to hear that brewers are getting the most from our equipment!
@brettdharris2 ай бұрын
I have been wanting something like this since purchasing my Apollo Stainless when they first arrived, thank you. Is it possible to fit a cooling coil to this lid? Is there space to drill it to fit the coil?
@littlejohnsbrewing91992 ай бұрын
Awesome bit of gear... I will need to get one for a dry hopping tool.
@damionblack48772 ай бұрын
Ship to the us please I need one
@AndrewLynch92 ай бұрын
For the apollo unitank I would need to use the thermowell from the stubbie. Looks good and can't wait to try it
@YeastFace2 ай бұрын
Looks great. Hope it will be available in Britain soon.
@devilmaycare28092 ай бұрын
Used a chubby before, in my opinion they aren't as good as the all rounder so I went that route, but at least this version now has some of the all rounder features that make it so easy to use and clean that it should have had originally.
@freshplasticup57952 ай бұрын
What is ... A litre😂😅
@Keg-King2 ай бұрын
😆
@willfiala18592 ай бұрын
Latin would be really cool - let me see if we can get hold of a local Gladiator who lives in Geelong
@MetalGuru7852 ай бұрын
Why are we getting all this French crap this channel?