I plugged my 17.5 amp hr battery to the charger and there is not light at all. No green or red light. Is my battery faulty? For reference I plugged my 7 am hr battery and the light is green.

So I just received my 17.5 amp hour battery and I have a nother 17.5 amp hour battery. I put them both to charge with the supplied charger. The light on the charger has not turned green. And the new charger feels really warm. Could the battery be bad?

Thanks for the video mate. I really needed this tutorial as the instruction manual is too complicated for me.

8.5 minutes of horseshit. 1.5 minutes of so so helpful information. I have no doubt your eyes are brown.

Great info . Thank you.

you could use carbon fiber mat yes

Rather than polyester resin, use epoxy resin. It doesn't damage the foam. I'm intrigued at the idea of using clear varnish as the sealing resin. It's not going to add much strength but on foamies, I guess it doesn't need much.

Didn't work for me. I tried several times. Almost gave up. Then I turned the throttle of exactly after the first 4 beeps, and that did it. Just hope I did not change any other setting with all the trying. I am a bit worried about that.

It is very difficult to fly off grass. The pilot in the video has some experience with his foot shove followed by throttle. It almost always noses over in grass. Bigger wheels and spacers 4mm > 8mm do not help much. You pretty much need to get it moving and bang the throttle to get it moving quick or it will nose. Forget taxiing on grass ever. I love the 109 and it flies great but I rarely fly it cause I am stuck with a grass field. Will takeoff great from a dirt baseball diamond though!

Really nice flying ! Hello from New York 👍😊

Guys, I have your 50ah battery and impressed so far. You mentioned that the fully charged voltage is 12.6 volts. What is the lowest\cutoff voltage?

Dear God thank you. I've watched enough videos to build the gd battery but the simple red/green thing seems unknown until I got here. Thank you sir.

G'day guys, is there a solar panel I can use on my kayak to get a little more out of my battery in a day?

How do I connect it with a fuel engine?

I have a 24 volt motor , would I have to purchase 2 x 12volt battery’s ? Connected together?

Which foam is this?

Can you charge with a solar panel ?

Are you recommending putting an in-line fuse (2.55 min) despite having a BMS system? If so do you supply this with the kit?

Nice video lads , Here is the one we made for RAM's Qld kzbin.info/www/bejne/Z6W0hIWdqMxrm9U

late comment ,surprise u did not use flaps

Very Nice job.

Can you use a solar panel to charge these, what sort of set up would be required ?

You talk a lot ... I feel no fun watching a video

WTF... keep the camera still!!!!!

Power a trolling motor??

does charger come with battery? can i use my smart charger on lipo or are they life4 batteries? (rc smart charger) . is there an on board bms?

Thanks for the video, I’m going to be running a Lowrance TI2 Elite 7 with the 3-1 transducer, what kind of run time can I expect from your 17.5 Ah FPV?

The price are still alittle high, but looks like amazing product specially teaming up with berleypro

One way I was shown was to paint the surface then lay the fiberglass on flat as possible making sure to get all you air bubbles out. Then you impregnate the fiberglass further from the top again making sure to get all the air bubbles out.

It looks like it stalls very easy for such a lite wing loading ? what throttle setting were you using Cheers

Getting ready to order 2 of the 17.5 Ah batteries. Do you sell wiring kits to put them in parallel or have any instructions on how to do so?

Ugh. Why are you folding the cloth and not roll it!?

Hi the jst or balance plug is only needed when separate battery feed to sound system I think ? So if connecting system through main battery for plane I shouldn’t need the jst or balance plug is this correct ?

What weight cloth or thickness did you use. Here in the states it's available from 3/4 oz. to 6 oz?

What a great idea. The tail boom of my Bix 2 is very flexible. I will try this immediately

would you recommend this as a 3rd plane? i have flown the super cub s and the dynam c182 sky trainer

not too light and not too heavy just the right weight , so what weight cloth are you using?

Your controller was actually upside down, the throttle should be on the left and the turns and forwards and backwards on the right.

i have this issue when i turn the drone on, one motor keeps working non-stop and looks like it not responding to anything, i tried calibration and nothing works. can you help me with that, please

that stuff gets as stiff as a ministers dick ..

Just talking not doing

Mate I bought this aircraft out of your Bayswater store months ago and quote u said that I am going to have heaps of fun with it unquote how quickly you were right my son and I r having a ball as for covering im using high stencil packing tape under the fuselage only as for the rest of the aircraft trust when I tell u it can handle the punishment greg

Vary cool looking to get one delivered to the US

Best place to be . Fantastic people and amazing pilots. Cant say enough about these guys. Just too bad im always working.

LiFePo4 3S safe voltage range is 8.4V - 10.8V & Li-Ion 3S safe voltage range is 8.4V - 12.6V. Specs taken from your website for both FPV-POWER 7AH & 17.5AH KAYAK BATTERY Voltage: 7.5-12.6V So I believe the setting in your instruction ought to be Li-Ion 3S. Do correct me if I'm wrong.

Those holes in the base don't look too waterproof

HOW DO I CONNECT TWO BATERIALS OF THE DRR 3DR?

this looks like it will work great to add some structural rigidity to a few of my foam board models.

I have a tundra 1350 wing span, can I use them with that for longer flying time