MUG Racing

Пікірлер

@mannypack6983 Күн бұрын

How didi you put the cover back in, Im struggling it doesn’t fit and if I force it may damage the silicone. Help pls

@mugracing4965 Күн бұрын

@@mannypack6983 you need to jack up the engine to an angle that’ll give you some room to bolt it back on

@s.w9935 19 күн бұрын

Thanks man. But how do you replace the amount of water that leaked out?

@mugracing4965 19 күн бұрын

@@s.w9935 the amount of fluid that drains is not much. You can assemble and turn the car on. Let it come to temperature, let it cool down and check to see how much you need to refill.

@drivingdaily582 21 күн бұрын

Good job man

@mauicruza808 24 күн бұрын

You guys talk too much bro, just show the video.

@mugracing4965 24 күн бұрын

And we just bought that car back so there will be LOTS of talking when you see it come back around…😮

@AwsomeKarate Ай бұрын

😮 are those B16 skins and padding fitted on B13 frames? Interesting 🤔🤔 🤔🤔

@mugracing4965 Ай бұрын

@@AwsomeKarate they are 2013 NISMO JUKE seats Rear bottom just trimmed Rear back needs to be cut to size from bottom side and will just be for aesthetics because you can’t really seat anyone that’s taller than 3ft tall but who Evers sits in the rear seat anyways. Front seats are a bit high and will require lowering rails that I will be fabbing up or looking to adapt to seats. FULL VIDEO COMING SOON!👌

@cino3995 2 ай бұрын

No sabia que se podria reacolocar el alternador en esa posición literalmente te ahorra una correa

@mugracing4965 2 ай бұрын

Si puede. Tiene uno que utlizar el bracket de La pompa de power steering.

@LegendOfRandySS 2 ай бұрын

Im doing this in the morning. If this works you have made may day brother. Regardless, thank you.

@IvyTheLeafeon470YT 2 ай бұрын

I love the B15 Sentra!

@mugracing4965 2 ай бұрын

Thanks

@kernalsans5896 6 күн бұрын

@@mugracing4965I thought 04-07 was b16

@kernalsans5896 6 күн бұрын

I was truly mistaken lmao

@MexikanPanda 2 ай бұрын

Oh you can’t be late at all.. not even by a minute

@mugracing4965 2 ай бұрын

@@MexikanPanda I found that out… 12-14 weeks will be there on time…👌😁😎

@MexikanPanda 2 ай бұрын

@ especially with Spokes and the San Antonio autocross being stuck together due to our location in Austin being gone, the events have to be close knit

@mugracing4965 2 ай бұрын

@ what no more COTA???

@MexikanPanda 2 ай бұрын

@ nope, parking lot is being used as storage while they build the amusement park

@mugracing4965 2 ай бұрын

😲😲😲

@raymondjrolle3978 2 ай бұрын

witch ecu do you use?

@mugracing4965 2 ай бұрын

@@raymondjrolle3978 we use JWT ECU. Plug and play

@raymondjrolle3978 2 ай бұрын

@mugracing4965 how much would it cost to ship one to the Bahamas.i have a p11 ve turbo on 15psi with 550ccs injectors with a z32 maff on a safc

@mugracing4965 2 ай бұрын

@@raymondjrolle3978 www.jimwolftechnology.com/ You can contact them for more information

@bacchustheromangod 2 ай бұрын

Think it’s possible for a DIY type of job? Mechanics saying about 400$ for labor.

@mugracing4965 2 ай бұрын

@@bacchustheromangod yes it is, as long as you have time and some tools it is possible.

@bacchustheromangod 2 ай бұрын

@ I’m off the next 3 days so I’ll try to. And thank you for the video!

@passionsrundeeply 2 ай бұрын

Thank you! 🙌🏿🙌🏿

@germanflores4778 3 ай бұрын

I learned a lot with this video thanks

@germanflores4778 3 ай бұрын

Hi, thanks for your video! It's the only one I've seen that talks about the subject! I bought a kit on eBay too, and I was worried because the flywheel is solid and the clutch disc is also solid! You also mounted a similar kit! Tell me, do you have any problems with the vibrations! My Juke is a Nismo, also from 2016.

@mugracing4965 3 ай бұрын

Glad I could help!

@germanflores4778 3 ай бұрын

@@mugracing4965 Tell me, do you have any problems with the vibrations!? Thanks for answering

@mugracing4965 3 ай бұрын

@@germanflores4778 no we do not

@SpecVPitCrew 3 ай бұрын

Have fun and just DRIVE!

@blackmesaresearch2 3 ай бұрын

SR20DE+T 🙂. Lowport head with highport intake cam is best OE option.

@mugracing4965 3 ай бұрын

@@blackmesaresearch2 that is the plan…👌

@JonathanLopez-n7f 3 ай бұрын

How did you made the wiring for the fans to kick on ? Or did u used a manual fan controller ?

@mugracing4965 3 ай бұрын

@@JonathanLopez-n7f Both one has a temperature set controller and one will kick on when the OEM ECU reaches engine temperature.

@tortron 3 ай бұрын

10 years, rookie numbers, my good car hasnt moved in 10nyears 😂

@jayg639 3 ай бұрын

Can you swap a 2.0 into a hyundai that had a 1.8 ?

@MexikanPanda 3 ай бұрын

You gonna dirty that nice shirt hahaha

@02maddman 4 ай бұрын

👀👀👀👀👀👀👀👀👀👀👀👀👀

@rcwhore6548 4 ай бұрын

Love that dirty bitch ..respect sir. Cool ride

@SpecVPitCrew 4 ай бұрын

But so much FUN!!

@02maddman 4 ай бұрын

Don't forget I got dibs on the motor bro, I need it

@MexikanPanda 4 ай бұрын

Safe travels

@mugracing4965 4 ай бұрын

@@MexikanPanda we have about 35 days to get it ready!!💪🏼💪🏼💪🏼👌

@JonathanLopez-n7f 4 ай бұрын

Im doing mine the same swap but i dont k what maf sencor to run 😢

@mugracing4965 4 ай бұрын

@@JonathanLopez-n7f N62

@JonathanLopez-n7f 4 ай бұрын

What maf censor weree you running on it ?

@mugracing4965 4 ай бұрын

@@JonathanLopez-n7f N62

@JonathanLopez-n7f 4 ай бұрын

@@mugracing4965 you need a tune to run that maf censor?

@mugracing4965 4 ай бұрын

@@JonathanLopez-n7f yes, This is tuned with a www.jimwolftechnology.com/ ECU plug and play.

@swaveysteps 5 ай бұрын

Sr20 engines are so rare in the US

@mugracing4965 5 ай бұрын

@@swaveysteps I know that’s why every chance I find one I buy it

@swaveysteps 5 ай бұрын

@mugracing4965 right! I'm barely just getting my g20 infiniti 2002 finished almost everything was discontinued for the wheel bearings etc that I had to wait for ordering on this Japanese parts site that took forever 😭 each axle and part I tried getting like at autozone or napa didn't fit or were for automatic it's a hassle

@danielnino3861 5 ай бұрын

What was the name of that seal that need a retainer ? Timestamp 6:38

@firstlast-pt5pp 5 ай бұрын

@1:20 - it seems there are 2 versions of the sensor (many engines use this sensor). Everything is the same except for the o-ring - one is twice as thick. The reason why you had to force the sensor in in order to twist and lock it ( just align and twist to lock by design ).

@charlesgee83 6 ай бұрын

I really appreciate this video, and you are right other videos showed everything but what is most important and that was how to take the water temperature sensor out, however I was able to take out the sensor with your description of removing it

@charlesgee83 6 ай бұрын

The 2004 Mazda MPV LX Works identical to the Ford Taurus, I owned a Mazda

@charlesgee83 6 ай бұрын

Once again thank you you was a great help to me