😂to get the plaster to level possibly use orbital sander under the table and the plaster should settle level
@BoonesSlotCarGarage2 күн бұрын
@@JJPS_GP_Motorplex thanks JJPS , nice idea 💡
@Digger48132 күн бұрын
Welcome back brother, it’s so good to see you making videos again 😎
@BoonesSlotCarGarage2 күн бұрын
@@Digger4813 thanks Buddy
@fredkorte35153 күн бұрын
❤
@BoonesSlotCarGarage3 күн бұрын
@@fredkorte3515 thanks Fred
@malcolmcodrington3 күн бұрын
Welcome back I've missed your videos regards Malcolm from Adelaide south Australia
@BoonesSlotCarGarage2 күн бұрын
@@malcolmcodrington thank you Malcolm
@_Dave_S3 күн бұрын
Great stuff Boone! I would have never thought of doing a pour like this. It's a great look for an old Route 66 type building, and something I may tackle myself at some point. Thank you for posting!
@BoonesSlotCarGarage3 күн бұрын
@@_Dave_S thanks Dave
@brienduarte10153 күн бұрын
I took several of your ideas for bending the track. I feel I’ve come up with an easier stronger way to loosen up track for this. I’d love to send you photos and get your opinion. What do you think ?
@BoonesSlotCarGarage3 күн бұрын
@@brienduarte1015 love to see what you came up with buddy…
@Gale_Force_Raceway3 күн бұрын
Momma used to say "Rumors.... if you didn't hear it from the horses mouth, then ya heard from a horses @zz" heheh- Nice to see you back!
@BoonesSlotCarGarage3 күн бұрын
@@Gale_Force_Raceway 😂 thanks Gale
@GPS524 күн бұрын
Hi Boone, Can you use a wire mesh before you pour the plaster Paris ?
@BoonesSlotCarGarage3 күн бұрын
@@GPS52 yes you could, but it might need the be thicker than 1/4in
@GPS523 күн бұрын
Thanks Boone , Glade to see you back making videos.
@richardlange90944 күн бұрын
Good to see you again.
@BoonesSlotCarGarage4 күн бұрын
@@richardlange9094 thank you Richard
@chrispatzkowsky71654 күн бұрын
Boone so good to watch you again, another great video, you look very well. looking forward to your next video, I’ve been rewatching some of the older videos, I made a tunnel, a old time water tower, and a bridge, thanks for all the ideas and techniques.
@BoonesSlotCarGarage4 күн бұрын
@@chrispatzkowsky7165 thanks Chris, sounds like you have been busy 😂
@SlotCarWildman4 күн бұрын
Welcome back 🙏
@BoonesSlotCarGarage4 күн бұрын
@@SlotCarWildman thanks buddy
@wjspade4 күн бұрын
Welcome back, Boone! My daughters and I have missed you. I may have to join your Patreon!
@BoonesSlotCarGarage4 күн бұрын
@@wjspade thank you 😊, love to have you join us on Patreon
@MikeLandis-vv8jp4 күн бұрын
Woo-Hoo!!! The man is back. Welcome back Boone. LET'S DO THIS 💪😎
@BoonesSlotCarGarage4 күн бұрын
@@MikeLandis-vv8jp 😂 Thanks Mike
@MikeLandis-vv8jp3 күн бұрын
@@BoonesSlotCarGarage you're welcome buddy!!
@peterbeck90614 күн бұрын
Weiter so👍
@BoonesSlotCarGarage4 күн бұрын
@@peterbeck9061 thanks buddy
@davidvolk8064 күн бұрын
Awesome idea buddy, might give that ago but use 3d printed door and wall frames. If anyone is in oz the website is up and running. Cheers Boone.
@BoonesSlotCarGarage4 күн бұрын
@@davidvolk806 thanks Dave , the 3D printed idea is cool
@BoonesSlotCarGarage4 күн бұрын
@@davidvolk806 I saw your order , yaaaaa it works 😂
@dennisosborn55894 күн бұрын
The Man, The Myth, The Legend is Back!!!
@BoonesSlotCarGarage4 күн бұрын
@@dennisosborn5589 😂 thanks buddy
@66Slotter4 күн бұрын
Hey Boone Welcome back
@BoonesSlotCarGarage4 күн бұрын
@@66Slotter thanks buddy
@rowdybodine764910 күн бұрын
My HO slot cars have magnets. I would concerned about the cars bottoming out on that ridge before the corkscrew turn. You're testing it with the crapiest Tyco car with minimal magnetic force. You are kind of dedicating these pieces of track to accomplish this radical hill. But cool as heck! I can't wait to see you build the scenery.
@BoonesSlotCarGarage9 күн бұрын
@@rowdybodine7649 still a bunch of fine tuning to do 😂
@andresanchez226413 күн бұрын
Hello My name is Andre I wanted to ask you for your advice I have an N Sr GT 40 mark 4 White Kit I was wondering do I have to print first then paint it or can I just paint itThank you
@BoonesSlotCarGarage13 күн бұрын
@@andresanchez2264 I think you meant prime it first ? But yes a thin coat of primer is a smart thing to do. It will help with the adhesion for your topcoat. Plus when you lightly sand the primer you can take care of of and flaws in the plastic casting of the body
@rowdybodine764913 күн бұрын
Let's hope there is some track bending. You may want to create a power jump to the back straight.
@BoonesSlotCarGarage13 күн бұрын
@@rowdybodine7649 😂
@rowdybodine764913 күн бұрын
Always love your videos! You are a talented artist.
@BoonesSlotCarGarage13 күн бұрын
@@rowdybodine7649 thank you Rowdy
@rowdybodine764913 күн бұрын
Always buy new track. The rails will oxidize over time. You can clean the oxidation off, but once metal starts to oxidize, it will just come right back. Tyco and Tomy track are a little different (width of lanes, depth of slot, height of rails). Get the Tomy track!
@BoonesSlotCarGarage12 күн бұрын
@@rowdybodine7649 thanks buddy
@brienduarte101514 күн бұрын
Amazing. Simply amazing ! You are my inspiration Boone !
@BoonesSlotCarGarage12 күн бұрын
@@brienduarte1015 thanks buddy
@brienduarte101514 күн бұрын
Your diorama idea for the track is 1000% better than the ‘all our speed’ track builds. You build like I HOPE to build.
@BoonesSlotCarGarage12 күн бұрын
@@brienduarte1015 thank you Brien
@tomsellberg355816 күн бұрын
Nice layout…looks like a fun challenge drive!
@BoonesSlotCarGarage15 күн бұрын
@@tomsellberg3558 thanks Tom
@rfettig1Ай бұрын
Another Great how to video Boone...I know you did this some time ago, but just finally getting some time to watch some of these and learn. Always look forward to seeing how much detail you put into these projects and try to do that myself..Keep it going..
@BoonesSlotCarGarageАй бұрын
@@rfettig1 thank you Roger
@rfettig1Ай бұрын
Great video and attention to the detail....looking forward to what you show us next...
@BoonesSlotCarGarageАй бұрын
@@rfettig1 thank you buddy, I have a project in the works that I’m perfecting for a future video project.
@HobbyWorld_oneАй бұрын
Fantastic video and great explanation. I'm currently looking for inspiration for a rocky slot car track, and need to make all of the scenery tomorrow so I think that the foam solution might be the right choice :) Thanks for sharing
@BoonesSlotCarGarageАй бұрын
@@HobbyWorld_one thanks 😊, foam is wonderful super scenery goop 😂
@HobbyWorld_oneАй бұрын
@@BoonesSlotCarGarage It sure looks that way :) , built a lot of scenery but never used foam so really looking forward to it :D
@danalaniz7314Ай бұрын
Really helpful and information. Thanks for showing us all your hard and involved work. Can't wait to see the final.
@BoonesSlotCarGarageАй бұрын
@@danalaniz7314 thanks 😊
@Sallan.summersАй бұрын
please prepare before you start your video. You waste so much time getting organized on the video.
@BoonesSlotCarGarageАй бұрын
@@Sallan.summers 😂 it’s just the way it goes. Most of the time I’m running around just prior
@SlotCar2021Ай бұрын
Great video Boone
@BoonesSlotCarGarageАй бұрын
@@SlotCar2021 thanks 😊
@wjspadeАй бұрын
I sure do miss seeing your work. I hope Hurricane Beryl didn’t cause too many problems for ya! We were without power for the better part of 4 days.
@BoonesSlotCarGarageАй бұрын
@@wjspade thanks buddy, I’m trying to get back on the video train again. Luckily we missed the weather from Beryl . Sorry to hear about your loss of power , that’s never fun and especially in the heat .
@wjspadeАй бұрын
@@BoonesSlotCarGarage It was just like camping! Haha I have friends up in Houston who didn’t get power back until late Sunday night. One had a tree fall through his roof and I to his kitchen. The rain water destroyed all the hardwood flooring in the kitchen/dining/living room area. The cabinets soaked up water from the floor and have all but fallen apart as well. I live out in the woods and will have cleanup work to do for the better part of a year because of Beryl. The entire forest is about 10 - 15 feet shorter now and all the treetops are on the ground. Lots of free firewood, though! 👍🏼 I’m glad that you and yours were spared from the brunt of the storm. I hope all is well with Deception, too!
@chrispatzkowsky71652 ай бұрын
Lol
@turboprop53712 ай бұрын
The saga continues
@BoonesSlotCarGarage2 ай бұрын
😂 😂 😂
@jimwhite36282 ай бұрын
You could also use thin tent pegs for the main supports reckon.
@pjtoribio2 ай бұрын
Nice! Thanks for this video, just what I was looking for.
@BoonesSlotCarGarage2 ай бұрын
Thank you 😊
@teacupdew2 ай бұрын
Great tutorial 👍🏼
@BoonesSlotCarGarage2 ай бұрын
Thank you
@user-eq9pc3gx9o2 ай бұрын
Come in boon , come in ,anyone there ? lol 😊, greetings from Portsmouth England 🏴
@BoonesSlotCarGarage2 ай бұрын
😂 😂 😂
@wjspade3 ай бұрын
Does anybody else watch/listen to these while working on their own track layouts? I just wish I could get as much done at once as Boone does!
@BoonesSlotCarGarage3 ай бұрын
Thanks buddy
@paulk269911 күн бұрын
@@BoonesSlotCarGarage time too come back please :)
@BoonesSlotCarGarage9 күн бұрын
@@paulk2699 there is a video in the making. Hope to have it up this coming week!!! Thanks buddy
@paulk26999 күн бұрын
@@BoonesSlotCarGarage I'm really looking forward to it, always a pleasure. Thank you for your answer and greetings from Germany
@robsie77773 ай бұрын
This is great stuff!
@BoonesSlotCarGarage3 ай бұрын
Thank you
@donwest53873 ай бұрын
didn't know about the "loose pins"; great discovery!
@BoonesSlotCarGarage3 ай бұрын
Thanks 😊
@lucluc60203 ай бұрын
Magnificent. I suggest yellow light, more vintage color. Cheers
@BoonesSlotCarGarage3 ай бұрын
Thanks 😊, yes a softer light would be better 😂
@ebandcamp3 ай бұрын
I had to move and needed to give away my 6 lane 18’ x 8’ AFX track with 6 long chutes back and forth . I used the widest turns . I found 18””turns , 15”’12” respectively. Banks had to use 9”, 12”, 12” tightened up as close as possible . The bridge I used the 1/8” plywood for the 4’ transition’s . Very fast track with no trees or anything to reduce visibility and painted 3/4” ply gray . Used stock AFX cars with 2 deep cell 360 cold cranking amps car batteries in series . The cars took the 24+ volts with no problem . Didn’t need to put racing armature s in them but “ OMG “when we did just playing around ( gotta play ) . Ran 3 classes of stock armature racing classes in the stock car ,F1 , sports cars . gearing and stock magnets were allowed .
@BoonesSlotCarGarage3 ай бұрын
Cool
@chrispatzkowsky71653 ай бұрын
nice Boone.
@BoonesSlotCarGarage3 ай бұрын
Thanks Chris
@evilbeetlekustomscreations49653 ай бұрын
I have a question do you have a video showing the track itself I want to share your track with some friends but I can't find a quick video that shows the layout😊 the car that wrecked in the pond is probably my favorite part😊
@BoonesSlotCarGarage3 ай бұрын
Thanks 😊, I have two videos of the layout.
@wait4dl3 ай бұрын
boring. i would like to see the cars racing!
@BoonesSlotCarGarage3 ай бұрын
Well gotta get this done before the cars can race 😂
@wjspade3 ай бұрын
This is some of my favorite content. That may be because my daughters and I are currently building a track ourselves.
@peterbeck90613 ай бұрын
Respekt aus Deutschland 😊
@BoonesSlotCarGarage3 ай бұрын
Thank you Peter
@Clearwater1243 ай бұрын
Did I hear "YYYYAAAAAGGGGEEEE!!!!!"?
@BoonesSlotCarGarage3 ай бұрын
😂 😂 😂
@JJPS_GP_Motorplex3 ай бұрын
Those clip together billboards can be mounted on polystyrene plinths that are coloured as concrete base that could be weathered, and cracks etched in.
@BoonesSlotCarGarage3 ай бұрын
Yes they can , I just personally don’t care for the look of them . Plus if your scenery is not flat it makes it a bit difficult . But thanks buddy