Bro this video is 6 years old 😂

I got all the answers. I own a 09 Impala ss

Did you ever find out the problem

That's what I do, now it's being rebuilt. 214k miles, they don't last forever guy's

I literally just had this problem drove home about 6-7 miles going 40 in 2nd..Im self taught on fixing my rides so any tips would help me out..

What was the problem

What was the problem

Anyone could Fix it?

​@@TesiaBennett-rx1rxWhy not 3rd gear? Then slip it in D

Can u give us an update on the situation mines is doing that now this week but no engine light on

I'll have to try that with my range rover, it won't move in D at all but you can feel R catch but it wont move either, I think it might be the TC but none of the drive or propshafts move at all

@@jessebrown9046 ... By unplugging the TCM it somehow releases the one mechanical default gear which is third gear. Also referred to as LIMP MODE. You can use the vehicle for a good long while with just 3rd gear. Just go easy on it. No fast accelerations and try to keep your RPMS no higher than 2000. In other words, don't be a lead foot on the accelerator. As long as the pump in the transmission is working you won't hurt anything although using third gear constantly will wear it out much quicker. Not sure how long, or how soon it will wear it out, but I'm still going strong driving it daily now for months. I managed to procure a good transmission jack. I'm going to try to find a replacement transmission from a vehicle to pull myself and do a swap out rather than replace the bands in mine. The tear down and rebuild to replace the bands is far too intimidating for me and besides a kit to rebuild it would cost a pretty penny. Better to find a replacement you can pull yourself. Even then there are several different versions of the 4T65E, so you have to be very careful to get a compatible one that fits your vehicle.

Band issue will still have 1st and 2nd.

@@W.A.R.R. Not when all the bands are broken. I found a pr5ofessional who specializes in rebuilding the 4T65E and has done so many over the years he can usually pin point a diagnosis by way of the symptoms. 9 times out of 10 its the bands. Not quite always, but close enough. There is a manufacturing defect with the 4T65E that invariably leads to it. There is also an aftermarket upgrade kit to prevent it from ever happening again. Actually there are several upgrade kits to correct that and two other deficiencies and all three are dirt cheap.

Same problem still can’t find a fix

It wouldn’t move in drive and it was the maf sensor

@@keithmanning7400 yup

But guy was going to charge me over $1,000 to put in a trans... I'm glad I figured it out

@@em.marcus3970 was your car able to reverse? And mines won't drive forward I'm just pressing gas and my engine just revs up

@@lamontmcdaniels322 yup the same....mines only worked in reverse

Yo did u find out what it is

What makes you sure that this is the problem if you don’t mind me asking?

@@83cuttylskid63 It’s not the TC m if it was you would trip an engine code

I'm waiting for an answer too :/

Mine still does this, any fixes? Won’t shift on drive at all’s.

@@eddy200093 did you figure out what the cause was ?

700? Try 2000

Came across this , what do you mean by this how can I fix this ?

Mines doing same thing.help? How do i fix it

@@ralphdallas sell it... it'll juts keep having problems and your gonna waste more and more money trust

Actually it’s not your TCM would trip a code warning light…. I had mine replaced and it still did it I think it’s more of a pressure sensor or a solenoid

The shift solenoid is in the transmission man

Did you fix the problem i have the same problem

Yeah I can’t find a fix and get a answer

Mines gave me a shift solenoid e code. I changed both and it still do same thing.. I only feel it dropping into gear when i put it in 1st or 2nd gear on the shifter.

Mine has no check engine light and is doing the same thing

For what are you insinuating a reset cause that means touching the cables off the Battery

I did the battery cables it didn't fix anything

That's because its all bullshit...its burnt clutch packs...and these clowns think there funny.. one guys name piss ant.. spelled funny

Hey, I have a Buick Lacrosse 2005... My car started not wanting to go into drive, so I changed it to the first gear and bam it drove for the day. I went to go eat, when I came out all the gears that went forward stop working, except reverse, park, neutral. It's been 9 months and every mechanic is saying it's the transmission. I was wondering would this fluid work. Btw my transmission fluid is brown.

Yeah mine too.. Did you fix it?

@Ken Ben what part did you change for $20?

Ken Ben hey mine won’t go in drive either I got a 2007 Chevy impala ls only goes in reverse but won’t accelerate do you know what may be the problem?

hey mine won’t go in drive either I got a 2007 Chevy impala ls only goes in reverse but won’t accelerate do you know what may be the problem?

@@jeanaslet6551 remove transmission pan check for any broken parts or dirt.

Go Subscribe to my channel

was your car a 2009 Impala?

I have the same issue with my 2007 impala but my guy told me to change my filter inside the transmission pan I hope and pray that's the problem

@@antonioalford2518hi did it works?

@@antonioalford2518was it

Angel Aviles did u do it

Not yet but soon I do I will let y'all no how it went

Ok finally droped the transmission pan turns out my tranny is shot the drive band on mine was broken that why it won't take for forward so I have a mission lol hope urs is just the oil tubes

I just checked that on my g6 08 hoping that was the problem it wasn’t

I have the same problem and all my gears don't work but I can reverse but soon all your gears will give out

Mines exact same thing I can drive in 1,2 and reverse but not drive and D 😔 did you find out why or what you need to do

just last night mine went out it drives on R,1 & 2 any updates? my father in law will take a look at it later today

Mines does the same thing what did you do to fix it?

edgar juarez did you find out what it was

So what happened?

Low oil pressure has nothing to do with the transmission that's the oil in your engine

Could be the universal joints are worn are the ball joints take some penetrating oil open the hood squirt where the bolts come up that hold the struts in spray a few times and let that soak in see if it stops the penetrating oil will work its way down into the ball joints and into the struts Scotty kilmer on his channel show this

Hey was that the problem?

Was it the suply lines??????

What end up being wrong with your impala

@@kingfezzo2038 XD see XD

My issue is. People stating what they did but not saying if it fix the problem or commenting back to people. I’m not about to change 5 things watching videos and it won’t fix.

We need answers. Lol. My 2010 just did this 4 days ago

Just happened to mine any answers

Watch the bouncing ball.. ••••••^^^^^^ Get it rebuilt! 🏐

Susie Synth no shit 😂

No shit Sherlock Holmes. Dipshit

😂😂

Fucking ass hole

Suzy Q where are you

Hey I have A 2007 Chevy impala LT And I'm have a problem shifting backwards and forward. Sometimes it takes a while for it to shift what could that be? I only paid 700$ for the car and they just put a transmission in the car before I brought the car

is this just how to fix the pressure issue?

Just happen a few days ago. Can I call you?

@@TheMichaelbatts1 I need help with mine

K

All car makes and models have similar issues for various reasons . Gmc (owns Chevy ) actually makes great cars , the only large issue they have is in the dex cool coolant .Name a brand and i bet you can find someone who hates it .