just printed mine! came out great on the x1c put a hexagon pattern on the side pannels and went for a white and red color scheme! fits great on my ramp crab chassis, any chance you could share your hook mount I think that's super neat!
@TheHammerКүн бұрын
@@ShakosJournal i will try to get it up on thingiverse tomorrow morning.
@ShakosJournalКүн бұрын
@@TheHammer awesome thank you!
@TheHammerКүн бұрын
@@ShakosJournal here you go: www.thingiverse.com/thing:6786193
@ShakosJournal2 күн бұрын
i added the file and "bought" it but how am I supposed to get the file? i didn't get it in an email or anything and didn't see anywhere to download it
@ShakosJournal2 күн бұрын
never mind it was in my spam haha
@TheHammer2 күн бұрын
Once you checkout, you will get an email with a link to a download file.
@giuseppemotocross2 күн бұрын
Hi sorry, my M11X does not progressively add other models...it remains stuck on model n 1
@SteveSherar3 күн бұрын
Omg, what a truck, wow.
@em1rooder11 күн бұрын
I’ve been slacking on putting my ac back in mine. Definitely gonna try to tackle it in the fall/winter time. Sick build! Now you can go turbo with ease. Or put a really nice header.
@DJV9402211 күн бұрын
Friasss likes 👍
@DJV9402211 күн бұрын
Friasss likes 👍
@DJV9402211 күн бұрын
Friasss likes this
@YahooBryan12 күн бұрын
Hello Danny I sent you message on facebook about rc body.
@TheHammer12 күн бұрын
Got it.
@kawicepticon886612 күн бұрын
Question for you my nitro bro, I just picked up a used m5s, I threw in a new part set since compression was a bit low and slapped it on the bench for 1000ml. Today I had 5 minutes to slap it in the rig for some loaded break in. She flamed out first time as I was squeezing into the trigger -fair smoke, and the second time happened once I got to 40% from a slow roll..new plug, new gaskets, tank etc... . If I had more than 5 minutes to spend on it I'd get her sorted out . This is my first time running the 22e carb with that being said ,what are the default settings? This will save me a few minutes of time. I'm fluid on Novaossi and FX carbs. Thank you for the nitro content and any insight you can sling my way. I only have 1 hour a week to burn fuel so I value every minute I can save,
@@TheHammer Thanks for the response . I'm ultra familiar with tuning these engines...I own over 200 of them lol I have issues. I went out this am before anyone got up and got it sorted. Again I bought it used and it came w a R6 and the needles were both mega off . Super fat LSN..9 hours out from flush and HSN was 1 3/4 out from in ...UFF!. We are sorted now. Thanks for the suggestion.
@TheHammer11 күн бұрын
No problem.
@MikeJones_Official13 күн бұрын
Hey, what size are the over and under drive gears in your stealth and what part of the inside of the gearbox did you have to trim? Thanks
@YahooBryan15 күн бұрын
Heres my info so we can discuss delivery details thanks
@YahooBryan15 күн бұрын
Send me message
@Roberttttttttt16 күн бұрын
I keep losing my hing pins. They are always loose. Also always losing my ifs outdrives wish I could find a file to 3d print them
@WyteLOC18 күн бұрын
It seem like in my SCX 10 one dingo that I had 10 years ago really didn’t have much steering, but when the 10 two came out with the servo on chassis, the steering angle was way better
@TheHammer18 күн бұрын
@@WyteLOC yes. Steering is much better with soa
@dylanmcconnell569218 күн бұрын
Love the setup got the same car with Ronda drake motor it’s the best setup I’ve ever ran
@TheHammer18 күн бұрын
@@dylanmcconnell5692 awesome!
@RcOffroad951318 күн бұрын
Great video! Is that your girlfriend, or Wife? Or maybe your daughter? Not sure, but you guys are funny, lol 😆 😂
@TheHammer18 күн бұрын
That's my wife. 😆
@JasonsJunkDrawer23 күн бұрын
i love it
@fergie_fg48228 күн бұрын
Nice eg hatch haha 😂
@coreyfuchs73029 күн бұрын
Good looking rigg.. fat viper motor😂😂
@TheHammer29 күн бұрын
@coreyfuchs730 thanks!
@KAH231100Ай бұрын
M12 is best way to
@SteveSherarАй бұрын
I missed what chassis is that in mini me ?
@TheHammerАй бұрын
Robskiifab
@christopheresper6144Ай бұрын
Hell yeeeuh buddy that thing also slaps! Your channel along with a few others almost had me pulling the trigger on a Poizd but I decided to save it for after I get my first custom build dialed in. Me and my kids are always watching KZbin videos and play a game “real or rc?” Cuz man sometimes the scale and camera angles really fool you. Pretty soon we’re gonna have to play 1/10 or mini? lol. Anyways I did a similar thing to you, started building a little backyard course and realized quickly that a 1/10 would feel too big, so I got a Mazz Cheatcode V3 and some Mofo axles, etc. After seeing what my son’s Trx 4m could do with just brass wheels I know this thing will probably pull some crazy lines like the big trucks
@TheHammer29 күн бұрын
@@christopheresper6144 thanks!
@killertek78Ай бұрын
Nice looking rig! I wish Injora would make the Cling On's in a smaller size, like 57mm or there abouts. 70mm is just huge on a 1/24 truck, even a big on an 1/18.
@TheHammerАй бұрын
I kinda like the size. However, I will be switching to 63mm Ruptures as soon as they are available again.
@carmenlozanocastro7365Ай бұрын
Hola tengo unos 60 coches nuevos x rayas teal mágico hiper kiosco hsp 50 carcasas sin xtrenar y ruedas espuma 400 gordas los.. luego en 1.8 otras 100 sin usar y usadas arena y calle 50 mandos de cristal y 50 de receptor 9 mesa de arranque una barbarie.. 2021.me gasté 50.000.euros lo dejo al 25 % de su precio.o hacer un mocho..hay 2 savange hpi marcha atrás otro es 1.4 cem.es para verlo 50 chispo cargadores baterías..
@cybron7089Ай бұрын
Great video, great insight!
@TheHammerАй бұрын
Thanks! Ive been running these shocks for a while now and they're doing great.
@cybron7089Ай бұрын
Good to know. In europe dravtechs are hard to come by.
@TheHammerАй бұрын
Fwiw, I'm using dravtech offset caps now. I'm also testing some new ones from aliexpress that have a different "leak free" o-ring section. They are working great!
@Spin.ObsessionАй бұрын
Great setup Danny, most of my workouts are at 5am too! 😊
@TheHammerАй бұрын
@Spin.Obsession thanks! Just discovered your channel. Look foward to spin sessions!
@Spin.ObsessionАй бұрын
I actually checked out your channel to see the link between RC cars and spin when I stumbled across this video - and it all made sense! Not that I'd ever look a gift horse in the mouth, but now I'm extra happy to have you 😊
@TheHammerАй бұрын
Haha. Funny thing is, most RC car guys aren't into working out at all. Lol
@Spin.ObsessionАй бұрын
😂 I didn't want to say it!
@TheHammerАй бұрын
😂
@wyattboggs2149Ай бұрын
Looks awesome. So hard to find the right inserts for ruptures! Would you be willing to share the stl?
@TheHammerАй бұрын
Thanks! Sorry, but I cant share the file because it is a D440 file. You have to purchase it from them.
@Jsfea01Ай бұрын
Great video! Curious, what other chassis brands did you consider before you chose Poizd? What advantages did it have over the others? Thanks.
@wyattboggs2149Ай бұрын
@@TheHammer No worries, do you happen to have a link for their file to buy?
My first build can be seen in some of my earlier crawler videos. It's based on an element builders kit using a YFGRC chassis using lots of 3d printed parts. It is a very capable truck, but it was a budget build. The first thing that turned me on to the poizd chassis was the breakeven. Turns out, once it's dialed in, it's freaking awesome,
@michaelgraham2943Ай бұрын
Awesome
@genematuzek7664Ай бұрын
Did it actually work mine doesn't
@TheHammerАй бұрын
Yes. It works.
@meirdeaphАй бұрын
💯👍
@kiojjaysonreynolds51502 ай бұрын
What fans did you buy?
@TheHammer2 ай бұрын
I bought the Spal fans they recommend on there web site.
@JeffLafary2 ай бұрын
Hey Danny, I'm Jeff, and recently picked up a used d819rs, and I just realized how much slop is in the front end, especially the steering knuckles and c hubs seem to rock foreword and and back excessively. Could you tell me which parts I need to tighten the front end back up? Love your videos, slowly trying to watch them all. Thanks again, Jeff
@TheHammer2 ай бұрын
Honestly, they have a good bit of slop even brand new. Furthermore, they seem to handle better with tons of slop.
@JeffLafary2 ай бұрын
Ok thanks again. I know you are the man when it comes to these buggies, so I'll just leave it be for now. Are you still running your d819rs? Or have you moved to the newer d8 yet?
@jonpye86552 ай бұрын
Do not use K&N oil on your rc filters! You need motocross dirt bike style air filter oil. The Dark blue stuff.
@nehemiahbianchi47882 ай бұрын
This helped me know what parts to replace. Also, the tug buddy lp gearset is almost identical and works without any issues provided you replace all the gears.
@bigsteveh9992 ай бұрын
Nice Skillet
@bigsteveh9992 ай бұрын
Sick!
@DaddyDaughterRC-sw2zb2 ай бұрын
That has got to be the best climbs I have seen👍👍👍 amazing comparison on 1.9 Vs 2.2
@TheHammer2 ай бұрын
@@DaddyDaughterRC-sw2zb thanks!
@BRRunnerguy2 ай бұрын
Just bought my 4wd buggy after being out of the hobby for 30 years. Excited to get back and will be racing on this track. Look forward to meeting you.
@TheHammer2 ай бұрын
Awesome! I miss having a 4wd buggy. Maybe I need to get another one.
@BRRunnerguy2 ай бұрын
@@TheHammer guy named Mike selling a rtr xb4 in the shop. Check out fb page
@TheHammer2 ай бұрын
I am sponsored by HB Racing, so I'll definitely be running their stuff.
@JeffLafary2 ай бұрын
Oh and your videos are awesome. Great detail and easy to follow and understand. Great work.
@TheHammer2 ай бұрын
Thanks!
@JeffLafary2 ай бұрын
Hey Danny, my name is Jeff, and I just picked up what I believe is a d819rs(although the body just says d819). I just noticed the front right drive shaft is slightly bent. Both fronts say 91.5. I was just wondering if you knew of any aftermarket that aren't $84.
@TheHammer2 ай бұрын
I don't know of anything other than stock.
@cybron70892 ай бұрын
Wow 👍
@bobbyspenser73042 ай бұрын
That was a nice line an I seen were it started bouncing alitte in the middle what causes that my friend
@TheHammer2 ай бұрын
@bobbyspenser7304 3D printed inserts do that a little when you are giving it a little too much throttle. Its a trade off.
@bobbyspenser73042 ай бұрын
Oh yeah let that spider climb My friend keep up the great work thank you for sharing
@SCRedneckRC-Productions2 ай бұрын
That was pretty impressive
@bobbyspenser73042 ай бұрын
Hello my friend I have been watching your videos an that pozs chassis is the best I have seen at pulling lines but in this video you are using the yfgxfxf chassis are you still got it or using it because I have been saving an getting my parts together an I have everything but now I am getting ready to build my first lcg an I am trying to find me a chassis that someone is not using anymore because I just want something to get out an crawler around on these rocks around this nursing home I got hurt about 4 years ago and I am in a wheelchair now an I have a lot of great places to go to were I can go to but when it comes to chassis I get lost because there's so many if you or anyone you know has one an could help me along in the hobby here is my address 2966 slate Creek road Grundy Virginia 24614 i thank you for sharing your videos an all the great information an showing me alot that i have really learned an one day I want to build one like your poz rig thank you an hope i am not bothering you in anyway thank you again
@alomechanthasinh40792 ай бұрын
Digging the build. I subscribed
@favulus13 ай бұрын
it forms a damn good seal on the tank! i'm just a basher and i want one. lol
@BETOMZ953 ай бұрын
My friend, where did you get that chassis mounted carrier bearing as you called it?