That was lucky...i got mine replaced a while back then on the farm i ripped a hole in the tank...so its in town now...if i had more workshop tools id do it myself...that looks easy..guess urs bè same as my vt wagon maybe??
@peterhills60379 сағат бұрын
If one side of the strut is worn..does it pay to change both at the Sametime??
@downtheshedwithbyron7 сағат бұрын
Yeah mate do them as a pair 👍
@ProdriveGTКүн бұрын
Calibration?
@downtheshedwithbyron18 сағат бұрын
Hey mate Are you asking what the gap should be
@ProdriveGT18 сағат бұрын
@@downtheshedwithbyron yep
@downtheshedwithbyron15 сағат бұрын
@@ProdriveGT about .8
@ProdriveGT11 минут бұрын
@@downtheshedwithbyron thanks dude
@richardkd3048Күн бұрын
Genuinely helpful 👌
@downtheshedwithbyronКүн бұрын
Cheers mate im glad it helped 👍
@jadenwilkie9398Күн бұрын
Is it the same for VZ?
@downtheshedwithbyronКүн бұрын
Same process but will be different as its a alloytec
@nunyabuziness84212 күн бұрын
Never depend on just a jack always use jack stands people get killed all the time relying on Jack's
@downtheshedwithbyronКүн бұрын
Yep your not wrong mate and if you can put the spare tyre under the car as well
@druslocallawncare1094 күн бұрын
Vh slx seats man vb vc disnt have slx Love ya channel
@downtheshedwithbyron4 күн бұрын
Cheers mate 👍
@rcwp81105 күн бұрын
Looks that way to me 🎉
@downtheshedwithbyron5 күн бұрын
Its been sitting in the bush for over 30 years with a rod out the sump haha 😄
@rcwp81105 күн бұрын
Top looked gd lol
@user-el8ef6nm6b7 күн бұрын
Great video, very helpful, thank for putting the work into this
@downtheshedwithbyron7 күн бұрын
Awesome mate no dramas 👍
@user-el8ef6nm6b6 күн бұрын
@@downtheshedwithbyron completed this today, thanks again.
@downtheshedwithbyron6 күн бұрын
@@user-el8ef6nm6b no dramas mate 👍
@user-el8ef6nm6b6 күн бұрын
I’m getting check engine codes 171 and 174, after about two minutes, slightly rough idle at around 2 mins, Start idle around 1000 drops back to around 700 and faults. Replaced o2 sensors, MAF checked, cylinder drop check, manifold sensor replacement, sprayed carby cleaner around engine no changes. VY SS 2004 stock 190k, any ideas?
@Ashhhh10887 күн бұрын
I need to change the hub on my vs commodore with abs but i dont know which one i need to change as its my first time attempting to do it any ideas?
@downtheshedwithbyron7 күн бұрын
Mate im doing mine on the vr calais tomorrow I guessing your asking what wheel bearings to buy? These 3 no abs Abs with live axle Abs with irs
@Ashhhh10886 күн бұрын
Abs with live axel. I already have the hub. Just wanting to know which one do i replace? Is it front right side?
@Pugs.MintWhips8 күн бұрын
Mate hands down the best and most well explained video , got my Transmission out without a drama , tomorrow I proceed to stage 2 , thanks heaps legend 💪🏼💯
@downtheshedwithbyron7 күн бұрын
No dramas mate 👍
@60tbird18 күн бұрын
Another excellent instructional video.
@downtheshedwithbyron8 күн бұрын
Cheers mate 👍
@shanesmith93568 күн бұрын
This is where all PT Cruisers belong.😂
@downtheshedwithbyron8 күн бұрын
@@shanesmith9356 haha so many people said that to me
@Shanes_Shed8 күн бұрын
Just crumbles like tin foil!
@downtheshedwithbyron8 күн бұрын
Yeah bro
@Shanes_Shed8 күн бұрын
@@downtheshedwithbyron did you ask to have a go?
@AussieGarage9 күн бұрын
Awesome, need that at DJ's Farm
@downtheshedwithbyron9 күн бұрын
Yeah
@AussieGarage9 күн бұрын
Wicked video mate, it get better every time.
@downtheshedwithbyron9 күн бұрын
Awesome day but also a bumper due to the dart snapping
@NykoJorédié10 күн бұрын
Bonjour merci pr vos vidéo moi g un problème avec ma patrol elle l'a une perte de puissance vs pouvez m'aider
@downtheshedwithbyron10 күн бұрын
Sorry not sure what youve said
@god-in6kd11 күн бұрын
Nice work , Was nice to meet you cheers Richard the safe guy 😊
@downtheshedwithbyron11 күн бұрын
Oh G'day mate Yeah was awesome to meet you was looking forward to see what would happen with that big safe but next time My boy said we should build a solid metal bob from the minions and drop the safe on him just like in the movies haha i said that would be cool Take it easy mate Byron 👍
@druslocallawncare10911 күн бұрын
Not sure who was more excited to you guys or me to see old red running again
@downtheshedwithbyron11 күн бұрын
Haha it was a top day mate It starts almost straight away now every time
@oldskoolonly11 күн бұрын
How good!!!
@downtheshedwithbyron11 күн бұрын
Was an awesome day 👌
@BADQ12 күн бұрын
Looked like you guys had a blast and a fair few challenging moments haha
@downtheshedwithbyron12 күн бұрын
Yeah mate but right up our alley
@AutomotiveKarnage12 күн бұрын
Dude, how good was that day. Was a absolute blast to be part of it and help out.
@downtheshedwithbyron12 күн бұрын
Yeah mate looking forward to the next time 👍 When should we sort out that pub feed i owe you haha
@Shanes_Shed12 күн бұрын
Having all the fun!
@downtheshedwithbyron12 күн бұрын
Top day bro
@timfordfalconxf771412 күн бұрын
WOW a Y3 Sonata, DAMM the little thing looked good to. LEGIT good, HAHA cant wait to see it get turned into art ;)
@downtheshedwithbyron12 күн бұрын
Cheers mate 👍 ive been sorting that out for another video for them
@timfordfalconxf771412 күн бұрын
WOW have not seen a sedan SX4 in a while ( no loss ) Or a 2 door Astrea ( how ever you spell them ) in some time, C12 nissan,,, my god. i bet the Crappy transmission blew ob that. those where crap. 2012-2014 ish yet they already getting faded paint and/or in scarp yards, LOL Go to Midland in WA, THERE is loads of them. AS well as where i am. 3 in my street. all had issues. Anyway awseome stuff Byron. I hope you are well :)
@downtheshedwithbyron12 күн бұрын
Haha 😄 not wrong bro Thanks again mate 👍
@JankoMW12 күн бұрын
So after the flush an alternative to test/relieve the heat pressure rather than rag over the cap is to crack the bleed nipple at the top of the top hose.
@downtheshedwithbyron12 күн бұрын
I like to do it as im filling the system
@JankoMW10 күн бұрын
@@downtheshedwithbyron fair enough. Had a mate do the rag method when he thought it had cooled down enough and about a litre of coolant exploded on him, wasnt burned luckily but any hotter and yeah.
@tmautos-surrey-sussex12 күн бұрын
Thanks mate , perfect testing and explaining how to fix , had a 2006 1.8 petrol with the dreaded dry joints in the dash causing the dash to light up like a Christmas tree so sent it off and came back all fixed but then on roadtest this fault code came up and notice car was sluggish at slow speeds almost like a misfire , bam found your video really helped me find the problem with the intake manifold runners both had gone down . Cheers
@downtheshedwithbyron12 күн бұрын
No dramas mate im glad you got it sorted 👍
@thebossman80s18 күн бұрын
My gu patrol was leaking axle oil so I just did a full wheel bearing and swivel hub rebuild. I changed the king pin bearings and used some new shims, I then used a scale to correctly pull the knuckle to the spec stated in the manual to get it to move. Which was 0.5kg to 1.5kg. I did this both sides and I now have the death wobbles at 80kmp. I had slight wobble before doing this job but no where near this bad. I don’t understand what’s going on. Could it be that I have put too many shims in or could it be that I have done the job correctly but now the swivel hub is tightened to spec it is now put more force on the bushes that maybe wearing out causing the wobbles. I don’t know where to start, your advice would be greatly appreciated
@downtheshedwithbyron17 күн бұрын
Oh bugger mate thats not cool Maybe start with tyres swap the with the spare and see what happens 1 at a time Checking all bushes out seeing if any are split or damaged Checking tie rod ends for movement Yeah hope you get it sorted mate 👍
@nealW290418 күн бұрын
good video for the people with little experience save them a few bux and will be better engines out there with more oil changes done
@downtheshedwithbyron18 күн бұрын
Cheers mate 👍
@c4prlm4st3r19 күн бұрын
Hi there. Much obliged for the video. 1 video for a complete transmission system fluid change.
@JohnLaurent-f2i19 күн бұрын
Here ya go easy Az z zz
@downtheshedwithbyron18 күн бұрын
👍 yeah not to bad of a job
@bulldogbrett74719 күн бұрын
Good video mate , explained very well - thank you 😊
@downtheshedwithbyron18 күн бұрын
Thanks mate 👍
@MavroAltieri19 күн бұрын
He didn't say how he flushed out the overflow bottt
@downtheshedwithbyron18 күн бұрын
Can do if you need a hand
@60tbird119 күн бұрын
Excellent instructional video.
@downtheshedwithbyron18 күн бұрын
Cheers mate 👍
@666gazayouth19 күн бұрын
Can a bad clock spring cause a check engine light
@downtheshedwithbyron18 күн бұрын
Not sure mate i guess what codes have you got ?
@thekennydowd20 күн бұрын
Hey mate will this fix the flashing airbag light for clock spring fault code on a 2007 model?
@downtheshedwithbyron20 күн бұрын
G'day mate Not 100% sure sorry
@eurymiguelm920520 күн бұрын
Thanks Byron this is Ed from Brock man 4 your filipino friend. I loved your video really helps me, Cheers.
@downtheshedwithbyron20 күн бұрын
G'day mate 👍
@nealW290422 күн бұрын
if your not unsure 🤔🤔🤔🤔🤔🤔🤔🤔🤔🤪😳
@downtheshedwithbyron21 күн бұрын
👍
@ellielee-x4n23 күн бұрын
Thanks so much for your video, 67 old female who has had a frustrating morning trying to open the hatch 🙂
@downtheshedwithbyron23 күн бұрын
Your welcome love 👍
@stevencrane205324 күн бұрын
Great memories 👌
@downtheshedwithbyron24 күн бұрын
Mate im so proud of him you should see what he's working on now its in the lasts shed up date video Take it easy mate 👍
@stevencrane205324 күн бұрын
Well done 👏
@downtheshedwithbyron24 күн бұрын
Thanks mate 👍
@stevencrane205324 күн бұрын
Good luck 👍
@downtheshedwithbyron24 күн бұрын
Not wrong we need all the luck haha
@garfeildrules25 күн бұрын
Thanks for the instructions Byron, you're a legend mate!
@downtheshedwithbyron24 күн бұрын
No dramas mate 👍
@BenginamanTheBawws26 күн бұрын
You are an absolute legend. Byron for aussie of the year
@downtheshedwithbyron26 күн бұрын
Haha cheers mate take it easy 👍
@paulsoutbackgardenaustrali767426 күн бұрын
If I lived closer I'd like to help fixing ur car so I can learn at the same time...😊😢
@downtheshedwithbyron26 күн бұрын
G'day mate I could use a hand haha got abit of work on Take it easy mate Byron 👍
@paulsoutbackgardenaustrali767426 күн бұрын
@@downtheshedwithbyron ty bro...new sub anyway. Tc
@downtheshedwithbyron26 күн бұрын
@@paulsoutbackgardenaustrali7674 cheers mate 👍
@lufugasrobert977427 күн бұрын
Hi, thanks for the knowledge, I have TD42 hard start in the morning & it switchs off when moving,
@downtheshedwithbyron27 күн бұрын
Gday mate Oh bugger maybe check out me other video on hard to start