My ton board is different

It looks cartoony as hell

dude this looks like a kids fortnight kids games hard pass i want realism and brutality

The skins do not affect stats on the gun for anyone wondering the game is not p2w anymore the skins are only for esthetic. The game does have its faults and i mean alot but its a game i have played since ijji games and i still love it.

the generated text is hilarious.. but good job on the wipes. you did the right thing sitting back

I have a LC49G97TSSNXDC - (model code) C49G97TSSN - (model) And I cannot get a picture to display at all. I literally tried and thought I was finally into something but I can only get the blue light for the menu button to stay on (until I push the menu button, then it goes back into a loop. But still all this happened I’ve seen no picture. Will this tcon board be the same with my g9? Plus my monitor im goes in a loop literally forever non stop once I plug in the power cord and will only stop when I unplug the power cord. But in the meantime a loop lasts about 15-2O seconds then starts over and repeats. Basically the back ring light of the monitor comes on and then around 15-20 seconds it’s will flash the color white and goes off like no color then immediately come back to the color I had the monitor last set at, then 15-20 secs goes by and repeats the process j just explained . Thsts what I mean by saying it’s in a loop . But this whole time I’ve had no picture, but I connect my latop via EVERY CABLE COMBINATION possible, seriously don’t ask I own that cable now. But jn doing so and connecting via hdmi or usb-c or converter to laptop from the g9 , my laptop will detect it and I can see it I. Settings and have access to chsnfe resolution and refresh rate , again only through my latop but does me no good, I’ve changed to every refresh rate and resolution combination I have available, nothing. But thst 15-20 sec loop I was talking about still applied here, meaning I have that little timeframe to “change a setting” or whatever then times up as it “reconnects sequence “ starts and again the loop keeps going and going till I finally just unplug it. Here’s what I’ve found out though, the menu button flashes blue when the back light flashes white in the loop, also messing with the menu button if you pull back in the knob two times back to back really fast and then “click” (pushing up in the middle instead of going a direction after the two times fast pulling the button towards you, the monitor will have the blue light come on and will stay on where the menu button is, but the moment I move the menu button again it resets the loop and lights gone from under the menu button area and back to precious loop sequence . Any help? Anyone?! Update - 1/22/2025 EVERYONE that’s is having this issue. Well let me say, please try all the “standard support tips you can” but I hate to break it to you.. I have found why for my particular situation with my particular 49” - LC49G97TSSNXDC. Your answer is the.TCON BOARD. I KNOW THIS SOUNDS CRAZY BUT WHAT I’M BOUT TO TELL YOU AS I HAVE FIXED MINE NOT PERMANENTLY AND I’M GOOD AND GET THIS OUT OF THE WAY. IT WILL ONLY GET WORSE UNLESS AND I’LL GET TO THAT LATER WHEN I TOOK THE BACK OFF THE 49. I DID EVERY TROUBLESHOOTING TIP YOU CAN THINK OF IT. I I UNPLUGGED EVERY COMPONENT WITH A LITTLE PAPER, THIN CONNECTIONS BY FLIPPING A LITTLE TAB UP AND PULLING OUT THE CONNECTION AND THEN RESECURE IT AFTER CLEANING THE ENTIRE BOARD CLEANING THE ENTIRE CONNECTIONS. I EVEN WENT SO FAR AS TO TAKE THE BOTTOM PLATE THAT RUNS ALONG THE BOTTOM OF THE MONITOR, WHICH SURPRISINGLY THERE ARE TWO SEPARATE CONNECTIONS, ONE ON THE LEFT SIDE AND ONE FOR THE RIGHT SIDE, WHICH MAKE UP YOUR PICTURE. I MEAN, I TRIED EVERY SINGLE TIP I COULD POWER CYCLE. THIS IS TOO LONG TO NAME. I’VE TRIED IT NOW. I GOT A PICTURE HALF AT FIRST AND IT KIND OF SURPRISED ME AS THE TWO MAIN CONNECTORS THE ONES THAT WHEN YOU TAKE OFF THE LIGHT AND YOU LOOK AT THE TEON BOARD, YOU’LL SEE TWO PAPERTHIN CONNECTORS THAT CONNECT USUALLY TO THE BOTTOM AREA OF YOUR SCREEN IN MY PARTICULAR CASE THAT’S WHERE THEY WERE SINCE OBVIOUS ANOTHER REASON THERE WERE THE ONLY TWO CONNECTORS GOING TO THE TEON BOARD THAT WERE EXACTLY ALIKE THAT BEING SAID HOW DID I FIGURE THIS OUT I UNSCREWED THE BOARD FROM THE MONITOR ITSELF UNPLUGGED ALL THE CONNECTIONS CLEANED IT AND WHEN PUTTING IT ALL BACK TOGETHER, I SUDDENLY REALIZED THE CONNECTIONS ARE PERFECT. IT’S CLEAN. EVERYTHING IS PUT BACK EXACTLY AS THE FACTORY WOOD THEN IT DAWNED ON ME WHEN YOU PUT BACK THAT SILVER CASING FOR THE ACTUAL TEON BOARD THERE’S THAT BIG SQUARE GRAY LOOKS LIKE PUTTY CLUMP OF CLAY, AND IT IS PERFECTLY COVERING WHERE THERE’S CONNECTIONS ON MY CASE. IT WAS THE BOTTOM LEFT IF I HAVE THE MONITOR FLIPPED OVER AND I’M LOOKING AT IT AS I WOULD FLIPPED OVER, IT WAS THE BOTTOM LEFT OF THE TEA ON BOARD NOW I ALSO REALIZED WHEN I WENT TO GO TIGHTEN THOSE SCREWS BACK DOWN. I GOT THAT BOTTOM LEFT CORNER BECAUSE THERE IS INDEED A SCREW THAT GOES THERE. I THOUGHT I WAS IMAGINING THINGS I WENT TO GO TIGHTEN AS I APPLIED PRESSURE. I SAW A FLASH I WAS LIKE YEAH RIGHT NO WAY WELL WITH THE BACK OFF OF THE 49 WHEN IT FLASHES YOU’LL KNOW SO I’VE BEEN TROUBLESHOOTING THIS MONITOR FOR GOING ON FOUR HOURS AND I DEFINITELY SAW A FLASH SO I WENT TO GO APPLY PRESSURE AGAIN THIS TIME I DEFINITELY SAW FLASH AS I HELD PRESSURE ON THE BOTTOM LEFT SIDE OF THE T ON BOARD WITH THE CASING STILL ON IT I GOT HALF A SCREEN I’M NOT EVEN KIDDING. YOU HALF THE SCREEN WAS VISIBLE AS IN I COULD SEE MY COMPUTER WHICH WAS CONNECTED BY THE WAY VIA DISPLAY PORT TO USB-C DISPLAY PORT CONNECTION TO MONITOR USB-C TO MY LAPTOP WINDOWS BY THE WAY ANYWAYS FOR SOME ODD REASON ONLY HAVE TO SCREAM WILL COME ON, BUT THE MOMENT I LET THAT SCREWDRIVER GO THE BOTTOM LEFT CORNER PICTURE WAS BLACK OUT AGAIN, SO IT GOT ME THINKING THE TIGHTER I TIGHTEN IT. ALSO THE SCARIEST PART OF THIS WHOLE THING I WAS GETTING WORRIED I WAS GONNA BREAK OR GO THROUGH OR SOMETHING BAD WILL HAPPEN THEN IT HIT ME IF I CAN GET HALF A SCREEN FROM WHEN THE SHELL IS BEING PRESSED RIGHT THERE WHAT WOULD HAPPEN IF I TAKE THE CASING OFF AND JUST APPLY PRESSURE TO THE BOARD ITSELF WITH NO SCREWS ATTACHED SO IF YOU TAKE EVERY SCREW OUT SO IT HAS MORE FLEXIBLE ROOM, BUT FINALLY FINDING THE RIGHT SPOT CAUSE YOU’LL KNOW I MEAN, YOU’LL FIND A LOT OF SPOTS WHICH WILL MAKE THIS MONITOR FLASH AND YOU CAN HOLD CERTAIN AREAS OF THE TEA ON BOARD LIKE LITERALLY JUST PUT YOUR FINGER ON THE BOARD AND PRESS DOWN GENTLY AT FIRST, OF COURSE BUT THEN THAT’S IT. MY ISSUE WAS THE BOARD NOW I SAID I HAD GOTTEN IT FIXED TEMPORARILY AS IT WILL CAUSE ISSUES AND IT WILL ONLY GET WORSE. I CONTACTED SAMSUNG AND TRY TO GET A NEW TCON , model was Oscar for the T con board. I’m so short I found that sweet spot so I lined it up. Best I could when I put the casing back on but before I did that I put two metal quarter sized washers in that spot underneath that gray looking putty and that was enough that as I tightened, it would hold it in place as if I were applying my finger there and boom just like that monitor works everything‘s fine it will get worse and I hope this does work for someone because that’s the real problem and I wanna say this as I don’t know this to be the referral answer. I think it’s mainly due to moving or transporting the monitor incorrectly or even as to say picking it up as for me I had no help, but I do recall when I picked this thing up if you still have the stand on and pick it up with the stand, do not put your hand at the top of the stand and try and pick it up. Don’t do it because that’s the exact same spot where my issue lied so I’m thinking it’s a circuit or one of the lanes on the tea con board that when I went to go move the monitor it made the board flex so that’s why you’re gonna get flashing and flickering and because one of those lanes got disconnected, but figuring out which lane should be too much so the solution go back up as I already provided is only temporary please when you transport these things do not hold it at the bottom the bottom of that screen, even just holding it as in trying to hold it steady to put on amountis risky. The bottom of that monitor has about nine or 10 gold leaf like panels, which are connectors to a circuit board on each side so there’s two of them that meet in the middle with two connectors to the tea on board and where does the mountain sit the same spot where I was having issues? I hope this helps anyone that is having the problem like I went ahead and found my solution. I hope this works for you.

Thanks for posting this video. I have not tried this yet but I suspect you're on to something. I did try what the other guy was doing with the blow dryer and that did work for me at least for now.

Thank you very much. I didn‘t trusted this fix in the beginning but it seems to be the best thing you can get instead of throwing it away😅❤️ But do I have to worry about overheating or it catching on fire? I‘m just a little cautious with things i pull out of devices.. They do have a purpose after all

I thought this was a massive trolling, but solved my issue as well! Thanks!

Is this game still popular / playable? Used to play it back in the 2000s as a kid next to Soldier Front

hey, I have a g9 model LC49RG90SSUXEN, neither the menu nor any buttons work at all, and every now and then I see the monitor settings used, what can I do about it? is this the entire menu panel that needs to be replaced?

I'm sure this is legit, but imagine if it's a troll and all the comments are in on it and just saying "wow it worked!" and then tricking people into destroying their monitors lol. I have the 49" with the same issue, I was able to fix it by unplugging it and putting in an HDMI cable, then I flashed the firmware and it worked but then the HDMI trick wasn't working anymore, I guess I'm gonna have to take it apart and pull that capacitor out, will likely post here within a week or 2 when I do

curious if the monitor still works to this day after taking that out?

Nice find/fix. I have the same issue with my LC49 model, but the board looks different. Does the piece you removed have a label on the board?

Are you guys playing with ai or like other people too?

im first like 🤗😂

Dudes is so terriblefor max rank AND hes a loot snatcher lmao just take YT out of ur name and quit at that point

5:45 what do you mean? you shot his team mate, so he told him where you are. you got revieled as soon as you started shooting

nice

I have the same issue and for now im using the hair dryer fix but may have to give in and crack her open, gotta say though this is really poor on a Samsung product, my monitor is barely 2 years old and for the price point shouldn't be failing so soon.

the way csgo refurbished the whole game, AVA shoul've done something like this, the game had potential but it actually doesn't come close to today's Esports titles

Do you mind if I send you a video of mine? I have a G8 Odyssey it was working perfectly until I reset it from the menu now the Samsung and Odyssey Oled Screen comes on but then it’s all black and won’t show image is this the same issue you was having?

No luck for me I tried removing it . Still a blank screen and not even the input menu comes on . 😢

Good stuff keep it up. One thing I would recommend is making the cam and overlay a bit smaller and moving it to one of corners

I have a question and OBS doesn't show a picture of Delta Force for me. In OBS the image remains black. It works in every other game, just not in delta force. do you have a solution for this

Nice pc!

❤

bro, is ava global in a good state? i quit playing like 6 months ago... I saw you alot last year, but EU server in genral, it is hard to find matches when I tried to play.

That this still happens to recently bought models is just a fraud. I bought mine when it first came out and I knew they pushed the technical boundaries. I now after like 4? years I have the same issue.. I kinda am hesitant to rip the thermo off.. but I guess there is no other way out. The thing that makes no sense to me is that people have changed the whole Board and it did not help. It looks a lot like there is another component that kinda misinterpretes the signal from the thermistor. It does not seem like it is the thermistor itself.

THANK YOU!!! IT WORKS!!!! DANKE DANKE DANKE

😂😂 nice live wallpaper in ur laptop.

Your RAM sticks are in the wrong slots. Should be A2 and B2. Slots 2 and 4. Not in slots 1 and 3

I am an intel fan but I think a ryzen 7900x3d would be better tbh

better keep that radiator cleaner than tthe old one if u dont want to overheat

Nice things brother❤

lovely stuff

Ngl. That cpu placement worried me rough and angled, Specially when it moved pushing the ram in despite being 'locked in'

🔥🔥🔥

Nice Upgrades Man for your PC!!!🔥🔥🔥🔥

How you got this motherboard😅 Hebrew on the sticker😂

This is a regular G9 not a Neo

Thats a regular G9 not a Neo.

Damn this game looks pretty sick

it work also with other models

maaaaaaaaan I'm very happy, because I fixed my montitor thank's to this tutorial. I thought I would have to throw it away. thank you so much

p2w noob

Kinder naughty hahaha

You are kidding, my brother Kinder.😂