only part i didn’t like was the caliper hanging off the brake line. other than that. excellent video

What’s the caliper bolt torque spec? Generally, you don’t really have any idea how much your tightening something like that without a torque wrench. You’d be surprised that you could be from 60 foot pounds to 120 foot pounds and not even realize it.

Use a breaker bar not a ratchet. At least you didn't use a torque wrench. Also using copper anti seize is incorrect. That will not protect those pins. Use slide pin lubricant. Any auto parts store has it. They get hot, so the grease needs to be up to par.... anti seize is not a grease.

Why not just replace the blade? It’s much cheaper.

Thank ya much! This vid made a lot of sense! Appreciate your effort.

under drive pulleys, TPIS cat back flow masters, SLP ram air, B&M racing transmission 13.93 97.97 mph.

Is he calling it a CALIBER ? I think he is

THANKSSSS!!!!!!!

very important: you must hook up the blue wire !! labeled pwr antenna. if you don't, you won't get sound ! if you have small amps in the door, wire them directly to your aftermarket speakers.

No sou d with video

Very well done and informative video young man. Very helpful. Thank you.

Nice vid young fella keep up the good work

This kid's good

Lazy video. Do better

Amazingly helpful! Thanks. Doing rotors today.

Dont trust a guy who calls a truck a car

I have lots of questions. Do you have a shop in Indiana Indianapolis

What’s a link to the whole kit, with front and rear fender flares, along with the rocker panel armor.

Спасибо из далекой России.

I want to do the same but where do I buy the two small cables that connect the speaker?

great video! you think 16.5cm (6.49inch) speakers fit without that mounting bracket for mounting them?

Soo these people wanted to charge my wife $30 to replace each windshield wiper next week?GTFO I'll show that myself. Let me go look how's much it costs

Thank you for the link for the mounting plate

Thank you! Was super helpful! My dad's jeep speakers weren't working but this helped me take off the door panel and find out that the speakers weren't plugged in because the amps weren't mounted. Can you show how to install the tweeter speakers on the dash?

I have a 1990 l98 Corvette with an automatic when I just put Mufflers on it I ran a 14.4 I don't remember the speed when I put Arizona Speed and Marine Runners and throttle body I ran a 14.1 100 mph hope that gives you guys some indication what is capable of

What.size wheel spacers or adapters are you running ? Noticed wheels are nice and flush, what tire sizes ?

You can't count!!!! Its 38 years old!!!

That camshaft without remap and bigger injectors will not make huge difference.. as you already seen. You are still in 250bhp area of power...

Nice car!

LOL HOLY FUCK DID THAT CAMARO MOVE OUT IT WAS GONE

Did you have " aux" on your radio when yiu push mode before installation or did this appear after connectors this cable???

Great Job‼️Im not mechanical and I will have to watch again your vid and Save this Vid😎💪

I have the exact radio and vehicle(2007 Jeep Liberty) as you are replacing that already plays sirius, does this aftermarket stereo have the sirius tuner or do I need to purchase one for install? Thanks

What torgue specs? How many miles on vehicle? Thickness of old vs. new pads? Show slide pin "nubs" install.

aux cable is a piece of shit you hear more distortion than music and the aux cable do not charge your phone 😢😢👎

Great video but l hooked it all up and got no sound. The system is working but no sound is coming out what could that be please help.

hey man, could you also put the bracket and the other things that is needed for the radio. so, Ɪ can order it on amazon?! Ɪ have the radio, but forgot to get the other things. thanks man

Do they all have those amplifiers or it was an optional?

Thanks for the video. I did it to my 2012 in my driveway this afternoon, It was simple enough, but it took a long time to get those hoses loose, bout 45 minutes easily. I put a little sticky sealant on the casting bolt seats so the bolts would stay in place. That was the trickiest part. also, pulled the idler pulley off to get to that evil top left hose. Good luck everyone.

Thanks, I can do this. Looks scary from the top view like you have to dismantle the alternator. Simple, unlike trying to replace headlight bulbs on the same truck.

how do you remove the latch??

Hey how you doing my question is what about the rear does the rear speakers have amps on them?

Great Video - Thanks

I have a question about the two red wires and blk/green coming from the vehicle harness. Do they have to be splice together like you have in the video? Also there are 2 black/green wires which are ground and would those need to be spliced together?

Good video but the liberty has a pair of twitters installed on your dashboard. So it could be more correct to install in the door a middle dynamic without witter and to install the new separated twitter on the dashboard.

Excellent job, gives me the confidence to do this on my own!

thank you for this

where do i get the wiring diagram

how can i unscrew the inner bolt with rubber seal, rust won't unscrew

Why add body arrmor? I just bought a 06 tj rubi yesterday, and it has body arrmo just like this, I don't know why they put it, is it to protect paint, or to look cool? Idk I was the only jeep so I bought it with it