I crashed this quad in chlorine water a while back and something happened to the voltage divider on the board. Ever since then it hasnt given me readout. In betaflight the rig doesnt have any voltage readout either lol.

I highly HIGHLY recommend picking up a Radiomaster Pocket (Or a boxer) radio in ELRS configuration and then buying an Air75 ELRS whoop. I purchased the Skyzone Cobra X goggles. They are the nicest box goggles on the market because they have an external module bay and the best screen and DVR for recording. You could also probably find some Analog Fatshark Dominator goggles on the second hand market for around the same price. All-in-all, you would be in it for around $300-450 depending on which goggles and radio you pick up. Those three things will last you all throughout the hobby. Stay away from the RTF kits like EMAX sells, etc. An analog whoop setup like this was how I got into the hobby. Getting a 5" quad will be like buying a lamborghini without ever driving a car before. And you are very limited on locations you can fly them vs. a small whoop. Let me know if you have any more questions!

​@@ZeroVoltFPV ​ I appreciate it! Yes I ordered a radiomaster pocket and am gunna do the Sims for a bit, and tinywhoop sim. sweet I'll check out that tinywhoop! I saw a company just came out with a set of digital goggles for $200 that people seem to like!

@@ZeroVoltFPV yea I got a radiomaster pocket coming in the mail, gunna start with sims. I saw someone came out with digital goggles for $200! but sounds like you cannot put an analog converter up to them? And yes was totally planning on getting a tiny whoop to play with!!

@@uradumby25 Yes DJI has the Goggles N3 that will do Digital video transmission. However, the small 11 gram 04 lite VTX that they are going to be putting on whoops will be about $110 alone. More than an analog whoop in its entirety. SO its hard to justify to a newer pilot spending around $180-220 on a whoop versus them learning how to fly on something for half of the price. Also, if you crash it in un-retrievable water or end up losing it on a building due to inexperience you are going to be very salty about it. These whoops will also weigh quite a bit more than an analog whoop and thus, not fly as well. That being said I am EXTREMELY excited for the 04 lite unit to be available. I have always wanted to have a digital whoop but I can not stand HD Zero or Walksnail. And to answer your question, no. You can not attach an analog module/adapter to the Goggles N3. I currently have DJI Goggles V2 which you CAN attach an analog adapter to and it does support the 03 Air Unit which is a fantastic video system, but the adapter and module will cost you as much as a cheaper pair of analog goggles will and those goggles will not have support for the new 04 Air Unit.

@@ZeroVoltFPV oh dang, okay. I appreciate the explanation. I will dig into this more once I have some time on the sims!!!

I talk a lot of crap about the lack of schools and bandos in my city that arent gated/fenced off but I guess I am pretty lucky :)

Right! And im using a custom TPU canopy that I 3D Printed on this whoop that is practically bulletproof! Very surprised at the lack of jello

@ would you mind sharing the recipe?

@@RestingQuadFace Not at all! Search "BetaFPV Air65/75 Canopy + UFL Antenna Holder (Thicker for TPU)" on Thingiverse and please drop me a follow and a like! Everyone who has printed it has been very happy with the results!

@@ZeroVoltFPV Oh friend, you got that sub about a month ago. If I actually follow through on this one, I'll tag you in this finished build.

Thank you! Im trying to step it up every video!

Lol yup, its going to be my new name here on YT cuz Enioki is too hard for people to say. As for the 0.00v in my OSD, I crashed this whoop in chlorine water and it fried the Voltage Divider and ever since then it has read 0.00-0.002v in the OSD. You can check out my video "How To Not FPV" to see the incident if you like!

@@ZeroVoltFPV Ah interesting, good to know. Do you think you could do a SMD repair on it?

@@mohitreddy8082 Not sure. I think it would be much less of a headache to just buy a new AIO for $50 or an entire new whoop for $95 and have spare motor, camera, and frame afterwards or a whoop to let friends trash around to get them into the hobby. I am extremely busy with my small businesses and time is money. I set a 3min 30sec timer on my radio and most of the time I land my batteries perfectly at 3.8v

Its a pretty cool spot to rip. Ive been eyeing that metal structure for a while but my skills were lacking the past year.

Thanks for watching! Keep it locked for more!

Im really trying to get those cradles nice and smooth and low 👌

Very tight. And robust.

Thanks for that man! Im gonna return the favor and drop a sub back to you! Thats how us pilots thrive!

@@ZeroVoltFPV Thank you! Gotta support one another or the hobby will die 🤜🤛

Lol there was a float with a bubble machine on the top of it and it totally looked like it was snowing in some of the frames.

Thanks for your continued support! This night was a total blast!

Thanks man! I just subbed up to your channel. Not sure why I wasn't able to search for it the other day. Weird

KZbin is weird. You can filter your search results to only show channels if it happens again in the future. Keep ripping!

I think if I would have full throttle punched it at the moment the whoop initially tapped the water, that I could have saved it. I didnt see the splash and didn't know I was in the water till I saw the sediment floating by. I also probably could have turtled it under water and flown out of the bowl instead of having to grab my extension ladder but my brain wasn't thinking straight. It still lives, but I have 0.00v in my OSD so something minor happened to the board. It was chlorine water.

Hell yeah! Id sub back but im already subbed to you. Thanks for the sub!

Are you from Northern Cali as well?

@@ZeroVoltFPV Yup. I'm in Roseville.

@@andrewdahawk Oh okay you must be in the Sacto FPV Mob group with me. I used to live in Natomas. I am up in Chico and I have a whole group I fly with up here. If you ever roll up here sometime you should hit me up and we will have a meetup!

@@ZeroVoltFPV nice. I’ll let you know when I’m gonna be in that area next and we’ll plan something.

These things are super rad. We have cameras on them and fly them with goggles so you feel like you are in the cockpit of the plane and can go miles away from you.

Subbed back!

Got you back!

@@IDrone-l5m oh no that’s crazy! This thing weighs 33 grams all up weight but I still wouldn’t wanna get anywhere near someone with their baby. With my current experience and awareness level I would consider that pretty much impossible. I don’t fly anywhere near horses or babies etc

@@ZeroVoltFPV His wife divorced him over it.

@@IDrone-l5m That is absolutely wild. I hate to say it, but flying drones is a massive responsibility and there are certain people who just should not be doing it, period.

@@IDrone-l5m bro holy chit thats intense

Thank you! I really wanted to keep on doing passes and getting closer and closer but I didnt check how accessible the path was to get down there. I am super super comfortable getting very close to scraggle since I have been posting a lot of tree surfing and cinematic stuff in densely packed forests.

@EniokiFPV yeah I've seen your stuff like the pine grove...but I'd worry in that local about any chance of recovery...ya should go back and fly it again with some Good light on the falls maybe 😉

@@dallasb7117 With GPS rescue on board, something catastrophic would have to happen for me to lose the drone at that height. Like...a prop falling off, etc. To get better light on the falls I would have to go up there at like 11am or so. The hills block the sun on the falls in the later points of the day unfortunately.

Thanks! I need to invest in some li-on packs very soon. I am just running a very old 6S 1550 Mah Tattu V3.0. My 1200 mah Speedy Pizza packs would probably hold up better than this one tbh.

Thanks dude! Ive always wanted to fly a waterfall!

Thanks! I subbed to your channel! Ive got an even better one im gonna be uploading soon. Chasing a plane with a 78" wingspan and I got a lot closer shots this time.

@ Sweet thanks bro much appreciated 😎

I appreciate the kind words! Thank you for watching!

Its so fun! We have one with a 7' wingspan in our crew that im going to be chasing tonight!

@@ZeroVoltFPV Notifications on, can't wait to see it!

Thanks Dallas! Some might fine piloting you did yourself, there!

It really does! I didnt change my rates or anything!

@ are you flying esc 48/48 locked? Or 26/26?

@@babyzfpv1234 Tbh I have not a clue what that is lol. Like 48khz?

The Avata 2 is a very respectable drone/quadcopter in my opinion. Just dont use that silly motion remote :) IF you find yourself loving that, dont neglect looking into custom built quads or BNF's :)

Thanks bro! :)

Thanks homie!

Thank you! It’s a lot of fun to fly like this. I am pretty sure I do not fly with any expo but I would have to check my rates to be sure. I also do not change my rates at all when flying freestyle/cinematic. I feel like that would negatively affect my flying if I did. Consistency is key in my opinion 🔑

@@ZeroVoltFPV I agree Idont change mine at aoo Stock BF fates and expo.. But want to try new one.. Thanks

Thanks for the feedback! Im glad you enjoyed it.

It’s all about the steady hands 🤣 She flies so smooth I just can’t help it.

Thanks! Im gonna be doing a lot more cinematic stuff soon

Admittedly a better video title lol XD

@@VesselRxFpv lol I really wish I would have saw it sooner!

Unfortunately I did. I swear, water has magnetic properties lol.

Oh no lol. "You cant park here sir" lol.

Exactly! Ive learned this about 1S voltage recently. However, I am not getting voltage readout in my OSD now. Something got messed up. This is a small water fixture they are building at a children's park and my assumption is that there was a small amount of chlorine in the acorn thingy. It definitely did something to it. I cleaned it with isopropyl again and now have to rely on a timer on my radio so I dont fly my batteries down too low, but other than that it still flies like a dream.

@@ZeroVoltFPV The water probably saturated some sort of shunt or whatever. Does the amperage meter or mAh counter still work? Just use that to gauge the battery. You'll get to the point where you just know intuitively from flying that machine enough. At least you have a cool funny FPV story now.

@@rexfpv No. I am still getting OSD but the voltage says 0.00V and the Mah counter stays at 0. I have plugged it into betaflight and it basically does not read that there is a power source whatsoever. lol

Thanks! I just subbed back to ya!

This is the second fully submerged dip in water for this quad and it is just fine lol. 1S doesn't have much voltage to fry anything.