Optoproductions

Пікірлер

@giantmonsterman 19 сағат бұрын

Have you tried patching with 2 TD3s? I'm gonna try it later tonight and hopefully its cool

@optoproductions Сағат бұрын

I haven't but I bet it's fun 😀

@manusgraham1159 20 сағат бұрын

Love this kinda stuff

@DJ_312 Күн бұрын

SYNC @5:49 If you use a TRS cable the Start/Stop signal will be sent and you don't have to press start manually on the TD-3. Great video. I've learned a lot.

@optoproductions Күн бұрын

Yup, thanks for the tip, didn't know this at the time

@garreth11 3 күн бұрын

I cant follow-up the tips

@optoproductions Күн бұрын

It's too fast you mean? You can right click on a send and immediately open the plugin on a FX track there.

@mufakkas9731 4 күн бұрын

finally, excellent, thx

@coleboillat7695 5 күн бұрын

04:56 I'm zenned out

@optoproductions Сағат бұрын

Instructions unclear, try rephrasing your question.

@leckomio8812 5 күн бұрын

BS... Try some LFOs after high latency plugs...Midi clock transport signal is still not fixed and after nearly 15 years it won't ever be fixed.

@optoproductions 5 күн бұрын

A different topic but I feel your pain.

@danielcarvalho373 5 күн бұрын

for the custom compressor I would recommend to use, if you want to use the fundamental modules, to use the envelope generator (slew limiters also work fine), so you can also adjust the attack and decay, than iinvert the envelope (eg. mix module) and offset it with the rescale module. there are many ways and many many modules (as you know)...

@optoproductions Сағат бұрын

Yeh that's a nice addition 👍

@arbous65 6 күн бұрын

Hi. I really like the tone you get at 30 to 33 seconds mark. I was thinking if it is possible, that could be a starting point and then MIDI keys could change the cutoff gradually (opening up the filter slowly from left to right of the keyboard) instead of changing the oscillator frequency, and if it is possible, applying glide or portamento to that behavior. Please let me know. Thank you.

@optoproductions 6 күн бұрын

You can do that by turning keyboard tracking to 0% on the oscillators and turning it up on the filter.

@cwehden 7 күн бұрын

When you say modulate 'this' what were you actually modulating?

@optoproductions 7 күн бұрын

The filter cutoff :)

@everpuremusic 9 күн бұрын

OMG. I feel so stupid. Modulating decay with velocity is so obvious - I can't believe I have never thought of that myself! 🤦‍♂ Thank you for your video!

@optoproductions 9 күн бұрын

You're welcome :)

@BFHPET 10 күн бұрын

is it fixed so you can sidechain duck whitout latency?=

@optoproductions 10 күн бұрын

Nope, that's another issue

@jijbuis62 11 күн бұрын

Complimenten voor de set video's!!! Ik gebruik een Novation Launchkey mini, met 8 knoppen Works like a charm

@optoproductions 11 күн бұрын

Dankjewel! Ah ja die novation controllers zijn top!

@elnacko4530 11 күн бұрын

Thank you so much

@gabito93 13 күн бұрын

I'm using Digitakt 2 with minilogue XD and I couldn't make midi learn to work. No matter which knob I try to learn, digitakt always registers number 63. Going to the manual and setting specific CC values works at least.

@optoproductions 13 күн бұрын

Could be a dusty knob sending out cc data. If you've got both MIDI in/out connected, MIDI tx/rx is turned on and you've got the right channel then it should work.

@MichaelFreeman-dw3ho 14 күн бұрын

You can change the overall accent amount by turning the level knob when you’re in the accent menu. It’s set to 32 by default but can go up to 127 for more noticeable results

@optoproductions 14 күн бұрын

True, good tip! But it's still limited by the max velocity of 127.

@girlinagale 15 күн бұрын

In pitch mode my notes are short, is there a way to open the vca so holding a key holds the note pressed?

@optoproductions 15 күн бұрын

Open up the decay and close the envelope, that should do the trick

@girlinagale 15 күн бұрын

@@optoproductions Ah yes, it'll be the envelope, thanks.

@girlinagale 15 күн бұрын

Still getting a staccato note. Decay fully up, envelope fully down.

@thelostbaystudio 16 күн бұрын

Great video thank you!

@tomsmits9060 18 күн бұрын

Thanks!

@playamaqui 18 күн бұрын

Thank you!

@lGxtmXl 18 күн бұрын

Stupid question but what cables do you need for patches? 3.5 TRS ?

@optoproductions 18 күн бұрын

No ts in most cases, except for sync, which has a separate transport wire.

@jamiestewart1644 18 күн бұрын

Hi, is this mode available on the Nord Rack 2X?

@optoproductions 18 күн бұрын

I think only the regular 2, but not 100% sure

@xrabbz2010 18 күн бұрын

Great video thanks for this! Am i correct in saying i can plug the headphone out of my audio interface into the filter in and use the filter, resonance and distortion on the 3mo for any sound inside ableton? The 3mo will be our first hardware synth and we are unsure on this

@optoproductions 18 күн бұрын

You could, but the output would be very quiet. A line output would be better.

@xrabbz2010 17 күн бұрын

@optoproductions thank you for the reply! Unfortunately my volt only has 2 like outs that go to the speakers. Man I miss my apollo 😫

@optoproductions 17 күн бұрын

@@xrabbz2010 ah I get it, cranking the level is the way then 😃

@xrabbz2010 17 күн бұрын

@@optoproductions thanks for the info 🫶

@xrabbz2010 15 күн бұрын

@@optoproductions now i have it... I see how low the level is! Time for a mixer!

@komenor9145 19 күн бұрын

The recording length of the sample is very short. How long can the digitakt record?

@optoproductions 19 күн бұрын

66 seconds

@prod_ayush 20 күн бұрын

❤wow dude great

@wakinglife7065 21 күн бұрын

Thank you!

@KwadisTech 21 күн бұрын

I don't care, I want the stems separation.

@chrisbrodbeck1961 22 күн бұрын

I'm getting one,,,go tooo haaaave ttthhhhaAtttt

@optoproductions 22 күн бұрын

Yeeeaaah!!

@Kyoshi2012 23 күн бұрын

GAAF!!

@Kyoshi2012 23 күн бұрын

Wat een dikke sounds!

@gboot2338 23 күн бұрын

Nice tutorial! Maar, kan iemand mij uitleggen waarom Hollanders altijd met zo'n overdreven dikke "s" (die als " sh" klinkt op het verkeerde moment) Engels lullen?....klinkt alsof je teveel gezopen hebt!

@thomasmetz2681 24 күн бұрын

Thanks

@arnaudpfliger 24 күн бұрын

Really interisting, thanks for the tips ❤

@FuZZbaLLbee 24 күн бұрын

The adjusted decay almost sounds like a Physical modeled string

@FredBloggs919 24 күн бұрын

Hi, I’ve written a track in B minor - Is there a way to create random note sequences of a set length that are forced to stay within that scale? I can’t find a way and it’s driving me up the wall! Cheers!

@optoproductions 24 күн бұрын

Yes page 31 of the manual explains it, you can click on the notes of the keyboard to decide which notes are affected by the randomizer.

@bobbyrohr 25 күн бұрын

You make excellent videos. Thank you for your commitment. Subscribed.

@optoproductions 25 күн бұрын

Thank you! 🙌

@bobbyrohr 25 күн бұрын

Thank you for this tutorial. Very usefull 🍀

@VirtualModular 25 күн бұрын

Nice! You can do this with the VCV version too, it's got noise built in to the modelling so you don't need any input to get it feeding back. Just watch your speakers! 😂

@optoproductions 25 күн бұрын

Haha yeah a limiter wouldn't hurt at 😄

@jgr6955 27 күн бұрын

Nice one!! Thank you.

@carlos-pratspratsonthebeat1145 27 күн бұрын

Very Nice to Print Loops

@optoproductions 27 күн бұрын

Definitely! Or masters 🙂

@5T45H Ай бұрын

Getting more mileage from the synth like a boss

@SpacePirateTv092 Ай бұрын

Thanks brother!

@JethroDAvis024 Ай бұрын

Beautiful noise.

@witte2702 Ай бұрын

are you patching BOTH the CV and Gate out from beatstep into the TD-3-MO @ 5mins? I assume to Beatstep Shift+Encoders(1 2 3) is what you are controlling gate & slide (legato) with ?? thanks

@optoproductions Ай бұрын

That's right!

@witte2702 Ай бұрын

@@optoproductions thx. I have the beatstep (non-pro) and a TD3-MO. Do you give a consideration for the CV/Gate voltage? IIRC the ‘pro’ beatstep voltages can be changed in arturia’s software but just the stock voltage levels are available for the non-pro Beatstep. The Specs for the BeatStep and TD-3-MO are as below -- will there be any issues/risk with the combination. I am brand new to patching CV/Gate so am nervous. 😬 BeatStep Control Voltage: from OV to 7V Gate output: 8 Volts TD-3-MO • Filter CV in: 0 V to +12 V • CV in: +1 V to +5 V • Gate in: off: 0 V, on: +3.3 V

@optoproductions 28 күн бұрын

@@witte2702 those spec look perfectly fine to me! Usually, there's not much wrong you can do with patching, it's designed to work with all kinds of voltage ranges.

@joeymc5272 Ай бұрын

Hey man, so I have a quick question. I am trying to get Next to zero latency while recording Chase Bliss blooper but I can’t bring recording in on a later bar because bloopers midi is set in daw to go after the first pulse if that makes any sense so it always has to be bar one. Do you have any workaround for this and Ableton 12 on how to get Next to zero latency monitoring because I have an RME interfaceas well and I’ve tried just about everything and I’m getting anywhere from 54 MS to 97 MS of latency.

@optoproductions Ай бұрын

I'm not familiar with the blooper, but maybe it's responding to transport controls? Try setting the MIDI output clock mode in Ableton from Song to Pattern. According to the blooper manual you can also turn MIDI clock on or off over CC automation. Maybe you could automate that? 54ms is a lot. I would test it by connecting a cable from your audio interface output directly to your input to find the problem. It could be that the blooper is adding the latency here.

@joeymc5272 Ай бұрын

@@optoproductions i absolutely think blooper is adding the latency for sure. Thank you for the tips on this one. I never thought about that. Thanks so much! I have been having trouble recording external synths etc… starting on bar one. Never thought to offset that and start later to compensate. You definitely know your stuff well. By the way do you offer 1on1 tutoring lessons for ableton/modular?

@optoproductions 28 күн бұрын

@@joeymc5272 great, I'm glad I could help :) I do offer private lessons, you can find more info on my website, but feel free to email me for more info.

@conrad3k Ай бұрын

How many years more we have to wait Ableton to fix PDC for automation and tempo grid so people can finally start using tempo grid based plugins like LFOTool on later on the chain? 😅

@rayderrich Ай бұрын

A hybrid workflow like this saves so much money! Nice video, thanks.

@craigwood8862 Ай бұрын

It’s cool

Ең жақсы KZbin

Пікірлер