That temp reading off the reflective exhaust will always be inaccurate with a Thermal Gun. If you can paint it black in a spot you will get the real reading.

Will this bench unlock a BMW ECU

Harbour Freight now sells it…$99.99.

Looks good, thanks for testing and opening. Does not look like it will need a fuel line upgrade but definitely some type of heat sheathing since it is so close to the exhaust. Is the top control box able to be relocated? Looks super easy to kill it by accidentally spilling fuel on it, not the best location. What is the true fuel capacity? Amazon says 1.5 Gal or 6L but the unit shows an 8L mark?

QUESTION: Is there a special procedure to prime the unit when starting for the first time ? Than you and God bless 😊.

Great job. Mine is similar but I went with a larger area can to capture more gasses and droplets before hededing out mine is a 4" X 7" basically I atatched like you A cap on one end with the drain valve on the other end I put a clean out coupler with a threaded cap on the end and used pipe tape to seal the threads. I put a baffled plate on the bottom about 1.5" from the bottom to make a reservoir to catch the goo. My inlet and out lets are to stach 1" OD tubes. My choice of screen is very corce SS wool pulled slightly apart so I can easly see light through it. That fills the can from the top of the baffled reservior plate to just below the 1"OD outlet coupler. Like yours I have seperated the right and left side of the can with a wall like baffled plate and a 1" 90% inlet elbow forcing the gasses and droplets in and down the inside of the can. Using up more area of the SS wool filtering matierial to catch the particulats in side the can before going up and out the 1" out let coupler. This has great exit CCV, EGR flow and does an excellent job collecting particulets and liquids. This is in my 08 supperduty 6.4 diesel with 140K miles. Next mod is going to be O-ringed performance Heads and Studs, with Valve cover oilers bilt in. As no one believes I don't need head gaskets and oiling the Rockers etc has always been another isue with this truct. I probably still have head gaskets because I don't race her. She pulls well enough to get everything I want done.

how much for replacement filters

Good video and thank. 😊

I Googled this model and found it for $599. You mentioned it at $400. Do you have a link?

Hello Sir, (didn't catch your name), just received my exact same heater last week. I took the white metal cabinet off to do a pre-use inspection, fuel line and such before starting mine up. It's built very well and did not find anything loose or crimped. Anyhow, just wanted to let ya know, the plastic grill on the intake end is just screwed on hand tight to the burn chamber. That and the fuel cap will need to be removed to disassemble, then pull out on the side to clear the exhaust tube. Only started mine once so far but I really like it and would buy another. It's my first diesel heater. Enjoy your heater, Ken

What type of grease do you use?

For anyone wondering LF-Bros has a very similar heater BUT I think the quality is better in a few different parts. Like the bottom bucket on LF-Bros Is solid heavy duty cast aluminum. Also the cover is held on with clip nuts an screws instead of machine screws that just thread into metal. Also the gas cap seems to have a better o-ring seal on the Lf-Bros, The fuel line has a tiny spring inside it to keep it from collapsing...It doesn't have pop rivets holding things together...

For my mobile auto detailing business I use the blue earthquake air hose reel. Super heavy duty. Dual arm and the main hub is very robust. Well worth the the extra money.

Picked one of these up today from Sam's Club for 20 bux! Gonna use it for my new pc build. Thanks for the awesome review I'm about to be doing some drill work and good to know it can get some normal screws in.

Really helped me understand shredders. And I was able to FIX mine. TY so much.

There are no deals. Inside track club is a joke.

I have one. The specs for output and fuel are wrong. I do like it. Heats my 19 x 24 foot living room. I have to run it between setting 4 and 6 when it is 30°F outside. Consumes around 1.5 to 1.7 gallons from 5am to 9pm. Also you CANNOT set by temperature.

We're is it made

We're can I find one And how much was it. Thank u

Ty DIY...Gave me just enough info on control panel to figure it out...only didnt give info on set up button? the one with wrench***

havent watched video yet...hoping it has info on control set up...booklet sent was useless was not for all in one unit...and control information wording seems off...at least I wasnt understanding it...🤷‍♂️

The real question on my mind is are, how is customer service and ease of warrantee and availability of parts after the fact.

What can you do? Buy a metal one. Good brand though

How about sq/f ?

can you purchase extra length for exhaust tubing ?

I agree, it is hard to believe it is night time. If our cameras are going to be this good then we’ll have to stop trying to look outside with just our eyes. 😮

Ok what about the transmission filter?

a harbor frieght new jack failed on me while my benz was Jack up with it the front wheel on the jack shattered an made the car fall I would never buy there again thank God I just got off under the car other wise I would have been crushed garbage company!!! I called there main office an got no results don't buy jack from there unless u want to be crushed by ur own car !!!

I bought one of these to test, now I want to know if I can record to another location on my NAS, FTP and also if it has RTMP or even ONVIF streaming. Thanks.

Great video!

Great video

The microfiber towels are a dollar for 4 and the other ones are $3.99 for 12 if you do the math on it the 3.99 are just a little over 8 cents more per towel so it's not four times as high although it is a little higher you would be better to buy 3 of the dollar packs and save a buck and still have 12 towels

🤑

Thank you. I bought the Warrior hex bit holder it stripped out the first time I used it in my cordless drill. Also the black bungee cord/strap broke in a month. Keep’m coming

Good review, Thanks!

Good video thank you. 😊

I picked up the Hercules drill bit set and have used them. They do work very well.

Can you open the app and watch live with the camera?

Today we look at the Harbor Freight Dollar Days Plus Super Coupons and Instant Savings Coupons all in one video. Lot's of stocking stuffers for the holidays.

Ancel Echo?

This puppy did a nice job.

I would like to see that done on a sealed transmission.

That looks like a nice watch. I’ve never heard of that brand. Are you still using it? Any updates or thoughts on it? My wife bought me an apple watch a couple years ago. The only thing I liked about it was the feature that made my phone beep when it was lost. She’s getting me a Garmin watch this year. it’s less than apple watch, and the battery is supposed to last a week. If I knew about this brand, I probably would have given it a try. Maybe I’ll get one after the Garmin.

Tell you what it's refreshing to have videos that aren't generic, AI fabricated garbage! Keep it up man!

great explanation of what has to be done. Thanks for all the tips. One of mine broke about a year ago. Had a local shop come out and fix it. they replaced the spring and I talked myself into replacing them both, thinking i’d save on cost of another trip and the hassle of having them oos. total for both spring replacement was about $500 total. I’m glad I had them do it. it took these guys hours to get it done. i’m sure it would have taken me much longer. but, with your video, now I know how to take care of them better, so maybe they’ll last a long time. Oh, recently, I had reason to poke around my garage door opener app. you know the garage doors track how many times they’ve been used? The side that broke had 3-4x the use the other side had. I probably could have just lubed that other side nicely and saved a couple hundred bucks. Now I know…

good list. i love those 5mil gloves. box of 100 for a little over $5 on sale. i go through so many…. always changing them instead of washing up so much. great for painting project. ya, they tear sometimes, but at that price, it’s OK.

what kind of glue would you use for a bathroom ceiling?

Where can I find the security camera you did a couple of days ago?

The only thing that seems like it's worth it is the US general locker

The icon pocket knife is definitely worth it.picked up 2 of these about 3 months ago and use it every day very sharp