R-E-A-L-iT TV

Пікірлер

@Jaceace87 3 күн бұрын

Sounds nice, but if it can’t take regular photos as well, is useless. Also, I would love to see how it behaves in a not so perfect environment where there are obstacles and things in its way. Does it react to a flight? Does it just stop like a DJI drone? Does it almost impossible to finish the flight route or does it avoid, the obstacle and continue the mapping

@R-E-A-L-iT 3 күн бұрын

@@Jaceace87 The BLK2FLY is a fully autonomous LiDAR drone. It scans the environment it 3D, producing an accurate, lifelike point cloud. The drone has multiple collisions avoidance systems, including Visual and LiDAR SLAM, radars and much more. The drone was designed to serve the Architecture, Engineering and Construction markets.

@rob-rk1tl 10 күн бұрын

how good is it in the outdoors? A park for example

@R-E-A-L-iT 10 күн бұрын

@@rob-rk1tl the BLK2GO was designed to be used both indoors and outdoors. It is fantastic at rapid data collection and it would work great in a park environment, as long as identifiable features are presentalong the walked path.

@R-E-A-L-iT 18 күн бұрын

Hi Mark! Thank you for your question. The Leica ScanStation P50 has a ranging accuracy of 1.2mm + 10 PPM over full range up to 270m, and 3mm + 10 PPM over full range of up to 1.17KM. The 8” angular accuracy will dictate the maximum scanning resolution the scanner can achieve at various distances.

@MarkJFeller-x1r 18 күн бұрын

How is it accurate to 3mm at 1000m when it’s +/- 8” (39mm horizontally and vertically) and +/- 13mm at 1000m?

@fedriva Ай бұрын

what battery you're using? we use two acid batteries which are giving us only about 1 hour of scanning sometimes it shut down before doing the last dynamic and stiatic to close the file

@R-E-A-L-iT Ай бұрын

Thank you for your comment! For the Pegasus II Ultimate, it's recommended to use the Leica Battery Unit, which provides up to 9 hours of continuous operation. This should give you the extended scanning time you're looking for and prevent the issues you're experiencing with your current setup. We highly recommend replacing your current batteries with the Leica Battery Unit for improved performance and reliability. If you'd like assistance with the switch, we'd be happy to help! Feel free to reach out if you have any further questions.

@BackCorey-d5c 2 ай бұрын

Runolfsson Manor

@nhathoang9949 3 ай бұрын

nice video but can I ask what is the scan rate of blk2go pulse, how many points per second? because i dont see it on tech specs

@R-E-A-L-iT 3 ай бұрын

Hi @nhathoang9949 The BLK2GO Pulse scan rate is 39,080 pts/sec. You can check out all the specs by scrolling to the bottom of our product page here: www.r-e-a-l.it/capture/equipment/efficient/blk2go-pulse

@nhathoang9949 2 ай бұрын

@@R-E-A-L-iT thank u so much

@woodward7705 3 ай бұрын

Would be great to see an outside version scan for site surveys....

@R-E-A-L-iT 3 ай бұрын

We'd love for you to reach out to us at [email protected] to request sample data sets or to learn about other use cases!

@timolammi70 5 ай бұрын

When leica software works with Windows11? Now I can’t load licences to to Leica softwares???

@R-E-A-L-iT 5 ай бұрын

You can reach out to us at [email protected] if you need assistance with technical support! We look forward to hearing from you.

@justinmorris2740 6 ай бұрын

Warning! borrow one and trial it before buying. And test the importing and final usable quality of the output. I had the money to buy one and jobs lined up to pay it off in a couple of weeks. I borrowed one for a day and tried scanning a warehouse.......and didn't buy one and won't. I was completely embarrassed in front of the client as the unit crashed about every 3 minutes and had to be restarted. I then and had to go back with another point cloud scanner and redo the job for no cost (a gen 1 BLK360 which I've had for 6 years, slow and flakey but they do work). I wasted a whole day on site with the BLK2GO and didn't get a single usable scan out of the device, and it took 3 days to get the data out of it (a nightmare to get the data out of the thing) and only a couple of the scans were importable and were so bad in quality that they were never used. I've never been so excited about a bit of tech to be so badly let down to the point that there was nothing usable out of 4 hours of scanning.

@R-E-A-L-iT 5 ай бұрын

I'm sorry to hear you had a negative experience with the wrong scanner for the job! Please reach out to use at [email protected] if you'd like to consult about how to avoid this in the future. Our goal is to never have a client face a situation like this! Each scanner has pros and cons in different situations. Sounds like the BLK2GO really wasn't the right choice for this setting -- and that this unit had some issues. That crashing shouldn't be happening.

@Mustan__g-l1i 6 ай бұрын

what should be the typical pc requirements for this?

@R-E-A-L-iT 6 ай бұрын

Hello! You don't actually need a particularly powerful computer to view and process point cloud data using software from Leica Geosystems. Point cloud data is optimized so that your computer will only load as much as it can handle at a time. Having a more powerful computer will speed up some automated processes, however. Having a more powerful computer, comparable to a high-end gaming computer, is recommended for best performance. We offer computer hardware consultation if your interested, plus full computer construction. We also rent hardware, depending on availability. For more information, you can email us at [email protected].

@jopi19891 7 ай бұрын

How many m2 can it scan during the 13 min flight and how high can it fly? Say i have a skyscraper - 250 m high.

@R-E-A-L-iT 6 ай бұрын

The maximum capture speed is 5m/s (2m/s when the obstacles avoidance is active), depending on the desired density. This might represent 1350m2 (0.5pts/cm2) or 4100m2 (0.17pts/m2), but many environment factors can impact performance. The altitude limit for the drone is 1800m above sea level (asl), and as long as there is a good LTE network, there are no distance issues with the tablet (obviously there are legal restrictions on flying near buildings like this, and the device must be kept in sight).

@benjaminkoch6778 8 ай бұрын

I need to buy one of these. Im running out of work with my Pro3. Would love to do this stuff full time! Great video. :)

@R-E-A-L-iT 8 ай бұрын

Hi! When you're ready to discuss, please reach out to us at [email protected]!

@Vladimir0916 7 ай бұрын

Ben do you own a matterport pro 3

@benjaminkoch6778 7 ай бұрын

@@Vladimir0916 Yes, I do own a Matterport Pro3 yes sir.

@Vladimir0916 7 ай бұрын

@@benjaminkoch6778 can i contact you direct to ask you a couple of questions about that scanner

@luckybarbieri8533 8 ай бұрын

would this drone be able to capture large indoor spaces like a cathedral with precision?

@R-E-A-L-iT 8 ай бұрын

Hi Lucky. Yes, that is correct. The BLK2FLY can operate in indoor spaces to capture spatial data with centimeter precision.

@3d_laser_scanning 9 ай бұрын

hi bro, what the accuracy of this equipment?

@R-E-A-L-iT 8 ай бұрын

You can check out the details of the BLK 360 here: www.r-e-a-l.it/capture/equipment/terrestrial/blk360-g2

@R-E-A-L-iT 8 ай бұрын

But to answer your question, it's 4.0 mm @ 10 m

@michaelhicks8603 9 ай бұрын

Seems a lot more involved than some other scanners using slam or similar comparison based algs so movment of the scanner isn’t important to data tracking during and after scan. Is there a reason for this or something I missed? Like is this super crazy sub mm accurate or something

@R-E-A-L-iT 9 ай бұрын

Hi Michael. Thanks for your comment. Indeed, the P50 can achieve point accuracies of 1.2mm and at long range can scan up to a kilometer in distance. It is one of the best terrestrial scanners on the market in terms of those specifications.

@leonardoleonardo8355 10 ай бұрын

How much does it costs in US?

@R-E-A-L-iT 10 ай бұрын

feel free to email us at [email protected]

@GiveAndItShallBeGivenBack 11 ай бұрын

Do you teach 3d capturing and the related areas?

@R-E-A-L-iT 11 ай бұрын

We do! We service both the US and Canadian markets. Please refer to our website for contact information.

@GiveAndItShallBeGivenBack 11 ай бұрын

I would like to see the end product of this activity.

@GiveAndItShallBeGivenBack 11 ай бұрын

Really impressive

@GiveAndItShallBeGivenBack 11 ай бұрын

I wish to see the output of the RTC360

@R-E-A-L-iT 8 ай бұрын

Please reach out to us at [email protected] to request sample data!

@Allronderjitender 11 ай бұрын

Can you describe the export data format P40 Scanner?

@R-E-A-L-iT 11 ай бұрын

Hello, thank you for your comment. There are numerous export formats for processed point cloud data from the P-Series scanners, including E57, LAS, PTS and Leica LGS

@davidpartridge5483 Жыл бұрын

Is it possible to remove the BLK2GO from the quadcopter and use it in a handheld way?

@R-E-A-L-iT Жыл бұрын

Although the BLK2FLY looks and operates similarly to the BLK2GO, the BLK2FLY is a one-piece laser scanning drone.

@Alin4005 Жыл бұрын

People who use this Scanners are the same one's who build Leaning tower of Pisa!!

@Jack-hq4yq 4 ай бұрын

This is the dumbest comment I have ever read on youtube.

@budkopach3163 Жыл бұрын

WOW... This technology will be awesome... until.

@DevinFinn Жыл бұрын

Here before this blows up

@bovlder Жыл бұрын

welp..300 views honestly crazy how well made and underrated this content is

@R-E-A-L-iT 10 ай бұрын

We are glad you are enjoying our videos!

@eastudio-K Жыл бұрын

so no alignment? in cyclone 360 , amazing do you recommend this unit, or the new blk? I use the old generation blk now for documenting existing conditions

@R-E-A-L-iT Жыл бұрын

We love the new BLK360 G2 for all sorts of applications and it's definitely worth upgrading from the G1. For mobile use, the BLK2GO is awesome!