Holler woodsman

Пікірлер

@OneManTwoHandsOffGrid 27 күн бұрын

Your a clown mate

@jackmcminn2520 29 күн бұрын

Why are manufacturers knowingly doing this i got a 18 inch stihl bar with a bigger hole than the 20 inch i have

@hollerwoodsman 28 күн бұрын

@@jackmcminn2520 My guess is that smaller holes are cheaper than bigger holes.

@gunterbecker8528 9 күн бұрын

Invaluable information @@hollerwoodsman

@michaelmckenzie9351 29 күн бұрын

I ordered mine on November 20th…and haven’t received as of Christmas Eve…emailed last friday and got the “excuse” UPS is having a “problem” delivering to my address..never had a problem before…ruined my expectations this year..cancelled my subscription today..Merry Christmas Crap-pack

@hollerwoodsman 29 күн бұрын

@michaelmckenzie9351 That sucks. I hope you get it.

@ArcheryDad2024 Ай бұрын

Thanks for the review, mine should be here tomorrow. Looks like another bust of a month from Tacpack though. Not even a patch for Christmas. I agree that they seem to be focusing on the "plus" boxes and leaving us regular guys out in the wind.

@hollerwoodsman Ай бұрын

I've been getting Tacpack for quite a while and this is the weakest Christmas box I've gotten

@charlesalan2814 Ай бұрын

I just started a few months ago and got the top tier box and I was very disappointed. I got my Battle Box at the same time and I have to admit, Battle Box did much better this month. This was a very weak showing for Tacpack.

@5.56Media Ай бұрын

Good video. I'm kind of surprised they were very low in quantity this December.

@hollerwoodsman Ай бұрын

@5.56Media I think the muzzle device was the Big ticket item. In my opinion I think they are moving away from the regular boxs, and more into plus box and special boxs.

@5.56Media Ай бұрын

@@hollerwoodsman Roger that.

@charlesalan2814 Ай бұрын

@@hollerwoodsman I'm getting the plus boxes and it wasn't much better, A charging handle, end plate/castle nut and an Ambi safety selector switch. My Battle Box did much better this month. I'm hoping that the "Black Friday" box will be something to talk about.

@hollerwoodsman Ай бұрын

I might try battle box again.

@geneevans2600 Ай бұрын

Was this your 1st video?

@hollerwoodsman Ай бұрын

No, I've been trying to do better, though.

@DistinctGamer_ 2 ай бұрын

Hey man, did this fix the leak for your Echo CS-310 saw, or does it still leak like a sieve? Thanks!

@hollerwoodsman 2 ай бұрын

@DistinctGamer_ no it still leaks. It's got more issues than that.

@DistinctGamer_ 2 ай бұрын

@ gotcha. My neighbor has one. Did a lot of research, apparently they just all leak unless you replace all seals or store it on its side. Seems to be an Echo thing

@hollerwoodsman 2 ай бұрын

My bigger Echos don't leak. I'm thinking it's the oiling system on the smaller saws.

@DistinctGamer_ 2 ай бұрын

@@hollerwoodsman Probably right. Will advise my neighbor to store it on its side or empty it out when storing, otherwise, to put a rag under it and call it a day. Thanks!

@Mesol0vely 2 ай бұрын

Hello! Quick question. Can you attach a sawyer squeeze to the small mouth of the Capcap?

@hollerwoodsman 2 ай бұрын

I'm not for sure. I don't think I have a sawyer squeeze.

@JensenJonesjr 2 ай бұрын

Where did u get the adapter for the same set up?

@hollerwoodsman 2 ай бұрын

@@JensenJonesjr Red beard saws. Is where I got mine

@hollerwoodsman 2 ай бұрын

@@JensenJonesjr redbeardsaws.com/products/stihl-12mm-to-echo-590-620p-bar-adapter?_pos=4&_psq=ad&_ss=e&_v=1.0

@JensenJonesjr 2 ай бұрын

@ awesome thank u brother

@hollerwoodsman 2 ай бұрын

@JensenJonesjr Thank you for watching

@JensenJonesjr 2 ай бұрын

Where did u get the adapter for the same set up?

@JensenJonesjr 2 ай бұрын

Where did u get the adapter for the same set up?

@elvispusley3515 3 ай бұрын

I have never had an issue with the standard hole. Once in awhile the hole gets plugged. I am usually taken the bar or chain of at least every day and clean the hole during that time. I can see maybe opening it to the next numbered drill-bit size but any bigger is too much.

@Airsoftforall 3 ай бұрын

And seems like every light now has that strobe. I wish they would omit that. I get why some folks want that. But why not have it where you hold it for a second to turn off vs having to go through every step.

@hollerwoodsman 3 ай бұрын

@@Airsoftforall i totally agree.

@ginamccane853 3 ай бұрын

Get my plus box tomorrow, hopefully it has something redeeming in it compared to the basic disappointment.

@hollerwoodsman 3 ай бұрын

They do have their ups and downs.

@AnAmericanPatriot1555 3 ай бұрын

Bipod…

@ginamccane853 3 ай бұрын

@@AnAmericanPatriot1555 Ehh not impressed. Heavier than others I have.

@AnAmericanPatriot1555 3 ай бұрын

@@ginamccane853 hehe

@MrZilla500 3 ай бұрын

And it's not Mlock as says in description

@robinhoch924 3 ай бұрын

Sorry but looks like straight trash. Glad I cancelled

@JesseRosas-r5r 4 ай бұрын

Where did you purchase the dog spikes?

@hollerwoodsman 4 ай бұрын

@JesseRosas-r5r at my local echo dealer. That is a 620 clutch cover and spikes. The 590 cover is plastic and the spikes go to the studs, so it's a bit different.

@redscortgt93 4 ай бұрын

Any issues with oiling? I’m looking at running this adapter on an old Mcculloch. Same bar mount as the Echo. Thanks

@hollerwoodsman 4 ай бұрын

Thanks for watching. No issues at all.

@markir9 4 ай бұрын

Interesting vid! I just got a Shindaiwa 601sx (which I think is essentially the same as the echo CS-620). It does not need the decompression valve pushed in to start!

@SoloBroBro 5 ай бұрын

I have a decompression valve on the echo 620 that is stuck pushed in and the chainsaw will not start even after unflooding it by taking out the sparn plug and pulling the starter upside down allowing all gas to come out. I just got this chainsaw. Any advice?

@hollerwoodsman 5 ай бұрын

I'd say pull it out (14mm, I think) and see if it's junked up or what's going on with it. If the saw is new, it should be under warranty 5 years for "homeowner." I'm not for sure why it's acting up. Unless it's broke off. Keep me posted on what you find.

@SoloBroBro 5 ай бұрын

@hollerwoodsman I figured it out. I had taken out the decompression valve and it looked brand new, zero gunk. So, I took out the spark plug unflooded it, again, and this time I did no choke and it started in one pull. Basically even after unflooding it, the choke would immediately flood it for whatever reason so no choke for the win in this case for me.

@hollerwoodsman 5 ай бұрын

Sounds good. I'm glad you're up and going.

@joelhockett8137 5 ай бұрын

This junkie $63 kit did not come close to fitting my 620p Its slightly used so make an offer if interested and by all means contact red beard about fitment

@craighanson2983 6 ай бұрын

Sounds more like a clogged vent cap?

@hollerwoodsman 6 ай бұрын

@@craighanson2983 I did get a new cap later.

@brucelewis1017 6 ай бұрын

You need to speak up

@hollerwoodsman 6 ай бұрын

@@brucelewis1017 I didn't have a microphone at that time.

@TheRogerKyle 7 ай бұрын

Aren't the drive links different on the Stihl chain?

@hollerwoodsman 7 ай бұрын

The number of drivers are different. That depends on the bar mostly. As far as I know the shape of the drivers are the same

@davesteier-xf5lh 5 ай бұрын

24/25 27/28 It’s marketing. My “27” inch echo 620 is running a rs chain. Stihls “25” is everybody else’s 24” bar just like Echos “27” is everybody else’s 28” bar. 3/8 chain is highly common. That’s how they control the saws. Just match your 3 numbers. People running 24” + 325 chain had to make them. Dang near impossible to buy. Like oregons new bar naming system names. You can’t find this in a light bar, but this you can have all day and we’ll even throw in a chain! If you try to find the p# in a catalogue or online good luck with that and prepare for a migraine

@LoneStarRay 8 ай бұрын

Thanks man 💯 real life for sure lol

@hollerwoodsman 8 ай бұрын

Thanks, I try and cut out the b.s. and just show what's up.

@ejsocci2630 10 ай бұрын

Awesome video thanks

@Davids_United-Fam 10 ай бұрын

Great vid do you have a link to the assembly kit in the bag presented there ? And what tools did you use ? I've got a Echo cs 590 we just bought from a pawnshop and it's leaking oil I've done and inspection and clean up so I know I've gotta change the oiler.

@ciphercode2298 10 ай бұрын

I miss milling. I used a stihl ms441c for 10 years milling,but it finally toasted out on me. It's so complicated to work on I wont tryin repair it. Hopefully in another year I can get me a new 462 or 500i.

@hollerwoodsman 10 ай бұрын

There's lots of videos on rebuilding saws. For the most part, there are pretty simple. I would love to try out a 500i, but that's more saw than I probably need. Thanks for watching and commenting.

@5.56Media 10 ай бұрын

Yours was the first March 2024 TacPack vid I watched. I can dig the armorer's wrench ... also having an extra mag is always good. The rest ... meh. Good video. Thanks!

@hollerwoodsman 10 ай бұрын

I agree. Next month will probably be better

@rickwhite3112 11 ай бұрын

You didn’t show how to drill that hole bigger… or at an angle. Just talk over and over about making the hole bigger. But how??!

@hollerwoodsman 11 ай бұрын

Sorry about that, I get kinda excited when the camera is going. I used a 7/ 32-bit straight down. That size might work for you but might not. Just make sure that you don't take out too much and get into the rail. It's easier to drill more than to put back. I got a bar that I need to open up I'll try and make a better video on that one soon. Thanks for watching.

@buckyboy4943 11 ай бұрын

Well done video and explanation. I’m about to install the filter kit on my cs620 and this was quite helpful.

@hollerwoodsman 11 ай бұрын

Thanks I'm trying

@zeromark202 11 ай бұрын

590’s are great saws, I have noticed that that springs wear though and squeak on the 590 & 620 I have both.

@hollerwoodsman 11 ай бұрын

I wasn't able to find any after-market springs. I'm sure these will start squeeking again. I hope that the piece of hose helps limit some extra travel.

@pkizzle65 Жыл бұрын

pretty weak box

@hollerwoodsman Жыл бұрын

You win some you lose some.

@2averagenoobs108 Жыл бұрын

Hey cool video bro! I would recommend maybe getting a CAT style TQ. The RATS is good but if you're by yourself, more moving parts to use it and honestly does the job the CATS can, but is also more painful. If you have a PO box I can send you a SOF Gen5 CATS TQ. I stole a few of em from my supply cage and wouldn't mind sending you one to keep on hand when you're outdoors.

@hollerwoodsman Жыл бұрын

Thanks for watching. I'll check out the cat style. Never hurts to have more options.

@2averagenoobs108 Жыл бұрын

@hollerwoodsman Do you have a PO box brother?

@hollerwoodsman Жыл бұрын

@2averagenoobs108 I don't at this time. Never really thought that anyone would send me something. Hahaha. I'll work on it and let you know.

@2averagenoobs108 Жыл бұрын

@hollerwoodsman sounds good brother. Please let me know, I want you to be safe even tho I just came across your channel. I do like your content alot. Short, simple, and cool.

@hollerwoodsman Жыл бұрын

@2averagenoobs108 Thanks brother. Always great to hear words of encouragement. I appreciate it. Stay safe and I'll talk with you soon.

@connorthecop5265 Жыл бұрын

my dad si a echo cs 620p

@pallmall5495 Жыл бұрын

Bought my wife a new Echo saw. She left me 10 minutes after using it. That has been 3 months ago. Word around town is a man with a Husqvarna 550 XP is dating her now. Be careful buying Echo stuff my friend.

@hollerwoodsman Жыл бұрын

She's not a Husqvarna fan... maybe a man with a 7310, though.... I'll keep an eye out. Hahaha

@ralphkanagy4602 Жыл бұрын

Nice video. Nice job God bless

@hollerwoodsman Жыл бұрын

Thank you

@dann8902 Жыл бұрын

Try diluting your bar oil with vegetable oil. Flows better esp in winter

@hollerwoodsman Жыл бұрын

I run some winter blend when it gets cold. I've been running the bars with no issues with oiling for a bit now. I actually had to turn the oil down some.

@vegar6013 7 ай бұрын

Not a good idea, this oil doesn't stick on your chain, so it gets to hot and stretch during time.

@williamtucker7574 Жыл бұрын

That is definitely not a old school bar on that saw I have 6 of those saws and all have roller noise bars on them

@hollerwoodsman Жыл бұрын

I was thinking the chain was an old style. It's might be a green safety chain. I've not seen one before.

@williamtucker7574 Жыл бұрын

Nope it's not a safety chain for sure

@hollerwoodsman Жыл бұрын

Well, I'm at loss then.

@williamtucker7574 Жыл бұрын

Lmmfao

@dowgreg516 Жыл бұрын

I'll bring my saws over and play if you want.

@hollerwoodsman Жыл бұрын

Sounds like a good time

@commalTl Жыл бұрын

Is this the normal tacpack or the plus?

@hollerwoodsman Жыл бұрын

It's the normal original one.

@Sawmillwoodworking Жыл бұрын

Nicee vidioss👍👍

@adrianstefan23 Жыл бұрын

👍👍👍👍

@paulhare662 Жыл бұрын

It appears to me that drilling a hole in front of and behind the original hole in the same diameter and grinding a slot of sorts would work best. Any wider top to bottom than the saw body slot just makes for possible leaks. I've done my bars that way for 40 years and have had good results.

@hollerwoodsman Жыл бұрын

That sounds good. But that world is more work, hahahaha.