There are two 1.25" vacuum ports for a shop vac hook up.
@JGunit2 жыл бұрын
Is there a calibration gauge for the calibration gauge? Haha
@E12_Sterling2 жыл бұрын
Actually we do! The calibrator for the calibration bloc is for internal use only as the calibration as is, i sufficient to check the frame and protractors for drift especially on those heavily used bending gauges.
@allenmollitor91882 жыл бұрын
Golfmechanix makes two benders and a gripping machine. They all have stands for easy working but they are not interchangeable. I asked if they could make one stand that fits all for customers with small home shops. Not yet, but why not; more people could buy one stand and year by year increase their tooling and save space.
@E12_Sterling2 жыл бұрын
Versatility is always dependent on the design envelope, function and cost. Too many compromises outside the envelope are just that, compromises that you must live with over the life time of the tool. Not worth it from a professional stand point.
@rumintokim73582 жыл бұрын
Saya mau beli,,,alat ini dimana ya,,,?
@peterlund64952 жыл бұрын
Absolutely amazing piece of kit I would love one.
@Samson.Boedefeld2 жыл бұрын
How accurate is the machine? Accurate to 0.3 swing weight points?
@E12_Sterling2 жыл бұрын
Microprocessors and sensors have evolved much over the past few years. 1/10th of a swing weight is now standard.
@allenmollitor91882 жыл бұрын
Wish I had all their tools, sure would eliminate doubts.
@Samson.Boedefeld2 жыл бұрын
Neutral plane ist where the shaft has it‘s least resistance (bends the easiest and most)?
@jalan81713 жыл бұрын
What? No instruction as to align the shaft within a clubhead to Flow Optimize it's oscillation pattern? Nice to know how to determine the F.L.O. of a raw shaft; next to useless not to know how to install it to maximum benefit for a golfer.
@ldh73953 жыл бұрын
So now you have shown us how to calibrate it please show us how to use it, that seems to be the big secret
@E12_Sterling3 жыл бұрын
Hello; The "big secret" is in the MOi matching software that ships with the device. The process is like matching clubs to a swing weight. The software will advise you what weight or length adjustments are needed and what would the MOI change be for the match based on your favorite club. The software will also calculate the projected swing weight if that is relevant to your fitting process.
@ngocthuc29404 жыл бұрын
n Korea, how do I contact
@ngocthuc29404 жыл бұрын
I need to buy a station
@E12_Sterling4 жыл бұрын
www.golfmechanix.com
@peterqvarfordt19594 жыл бұрын
Happy!! Great machine!!!
@peterqvarfordt19594 жыл бұрын
Great tool for Loft & Lie Machines!!!
@peterqvarfordt19595 жыл бұрын
Perfect for bending!!!
@user-ys7gq7xy7e5 жыл бұрын
2:27 how to download edit this page?
@danielbottcher28595 жыл бұрын
Hi have the auditor and need the cable to conect whith a PC ,can you help me, where can find it Thanks in advance
@E12_Sterling5 жыл бұрын
Please contact us directly!
@E12_Sterling5 жыл бұрын
Please contact us directly!
@danielbottcher28595 жыл бұрын
@@E12_Sterling Hi please let me know how mutch cost the Auditor( Speed check pruduct nº 160130 ), PC cable, posted to Alicante <Spain zip code 03193 thanks in advance Daniel
@peterqvarfordt19595 жыл бұрын
Every pro or clubmaker, need to have one 010710 Compact Bounce Angle Gauge!
@peterqvarfordt19595 жыл бұрын
Great job as always from Golfmechanix!
@peterqvarfordt19596 жыл бұрын
Everybody that makes shaft changes, needs this laser!!
@Alloverthegolf6 жыл бұрын
Hello! I am golfer from Russia, looking for international friends for youtube , twitter @hedgolfeastYuri and real golf. Welcome!
@jonh.16856 жыл бұрын
What measurement should be used? How is the deflection amount chosen for shafts? Is there a database of shafts measured? Is there a calibrating shaft?
@E12_Sterling6 жыл бұрын
Hello Jon, All the measurements you make are arbitrary. That is u decide what works best for you. As far as shaft deflection is concerned I would say no more than 2 In for wood shafts and 1 In. for iron shafts. Anything more can result in onset of creep due to micro-fracture due to the static load applied during testing. Micro-fracture occurs when the resin (in the graphite matrix) gets stressed close to the yield point.
@darcyc95106 жыл бұрын
Due to these golf swing secrets “Jοmtοnο Naha” (Google it), I had been able to find out “hows” and “whys” of a good golf swing and its various aspects. I have read the book 2 times and realized Fifteen yards more on all irons, Twenty-five more on my driver. My enjoyment of golf has doubled and my self-confidence has increased.
@darcyc95106 жыл бұрын
I have been a golf player for Several years and there are certain lessons which I have taken. Learning these golf swing secrets “Jοmtοnο Naha” (Google it) permitted me to shot a 75 after 2 buckets. I was able to get more familiar with numerous golf ideas like grip, ball position and through swing drills. My previous handicap is Thirteen, but now I`m beginning to drop it. This guide is fantastic!
@josemeredith6496 жыл бұрын
I have taken Golf swing courses from this guide “Jοmtοnο Naha” (Google it). They generate a custom model based on your arm length, height, shoulder width, club length, etc. The lessons have already been extremely helpful, enabling me to drop my handicap from a 22 to a 15 in the last year.
@josemeredith6496 жыл бұрын
When I read golf swing secrets “Jοmtοnο Naha” (Google), I uncovered how comprehensive it explains the correct way of performing a golf swing. The book tells the particular skills as well as swing tactics used by all golf tournament pros. I am still halfway in reading the book but I could say that the ideas are quite helpful. Looking over this book allowed me to score 3 straight low 80s rounds.
@danburnfield23026 жыл бұрын
The latest machine has a USB port so you do not need to go through connecting the extra hardware.
@Chris_the_golf_guy6 жыл бұрын
This is a great tool, but can you offer any suggestions on actual values to put in for shafts? it says "be careful not to go to far as to break it.... Thats' great advice, but generally speaking is there a rule of thumb with golf shafts to try and deflect to a certain point from the butt end? I've been using this tool for about a week, and using this profiling method, they've all pretty much come out the same shape of curve. It's kind of weird.
@danburnfield23026 жыл бұрын
I never go above 10000 and so far no shaft breaks. I never go closer than 16 inches from the butt as well. Be careful when recording your measurements. Because the rollers at the butt are set at 1 inch everything is 1 inch off. For example, the 16-inch reading is actually taken at 17 inches.
@ashtonh727 жыл бұрын
As I read golf swing secrets “Jοmtοnο Naha” (Google), I uncovered how in depth it explains the right way of performing a golf swing. The book tells the particular skills as well as swing tactics used by all golf tournament pros. I`m still halfway in reading the book however I could say that the ideas are quite helpful. Looking over this book allowed me to score Three straight low 80s rounds.
@peterqvarfordt19597 жыл бұрын
Great machine and we are selling a lot of them. Helping golfers, to get better clubs in the bag! Wilprod Sportagenturer AB Sweden
@E12_Sterling3 жыл бұрын
The MOI Matching process is a little bit more involved than just swing weighing. However it delivers measurable performance improvements to anyone with a descent swing. Beginners can also benefit by encouraging consistency between clubs.
@jaredwills2738 жыл бұрын
Why are there two reference notches on the lie reading display?
@peterqvarfordt19598 жыл бұрын
Great Lie & Loft Machine and comes also with and nice bending bar.
@peterqvarfordt19598 жыл бұрын
A great proper adjustable Fitting Putter tool!
@christiansarran46928 жыл бұрын
What about when finished with machine? Can I leave it on working table? My garage gets a little cold, will that affect it when not in use?
@E12_Sterling3 жыл бұрын
The MOI Speed MAtch system can be left on your workbench as long as you don't leave anything on the swinging beam as this could damage the internal timing mechanism.
@christiansarran46923 жыл бұрын
@@E12_Sterling I think my internal timing mechanism is damaged bc I keep getting error messages when trying to calibrate. Is there somewhere that will fix it or look at it?
@E12_Sterling3 жыл бұрын
@@christiansarran4692 Hello Christian; You should run calibration mode so you can re-align the laser and reset base timing. This is described in the manual We also have a video for that in the library! Also we've updated the design. so may be the new system doesn't apply to your model if purchased 2018 or before.
@christiansarran46923 жыл бұрын
@@E12_Sterling Yes, mine was purchased in 2015.
@E12_Sterling3 жыл бұрын
@@christiansarran4692 Okit canbe recalibrated and base timing reset. Please e-mail us!
@peterqvarfordt19598 жыл бұрын
Great Shaft Cutter!
@HeavenReservation9 жыл бұрын
Do you have any discount codes on your website you can share.
@Golfmechanix9 жыл бұрын
Hi! We don't have any discount codes, but since you are the first to purchase our product through KZbin, we can give you free shipping! Please correspond with us through e-mail, we will guide you through the process. E-mail: aimen at golfmechanix.com!
@HeavenReservation9 жыл бұрын
Great, where can I buy a few of these?
@Golfmechanix9 жыл бұрын
Hi! You can purchase this and other similar products at our website! The link is: www.golfmechanix.com
@tucker35Ire10 жыл бұрын
Looks great how do u order from Ireland.
@Golfmechanix10 жыл бұрын
Hi! You can find more information on our website here: www.golfmechanix.com/default.asp
@HeavenReservation10 жыл бұрын
How much are those lof and lie machines?
@82PeRK10 жыл бұрын
Same question Price please ?
@Golfmechanix10 жыл бұрын
Hi! For information regarding pricing and specs of this product, please follow this link to our website! www.golfmechanix.com/Items.asp?Pdts=15&CatDescription=Lie+and+loft+altering+tools
@HeavenReservation10 жыл бұрын
great, how much is your Frequency analyzer?
@Golfmechanix10 жыл бұрын
Hi! For more information regarding pricing and specs, please visit our website. Linked to the product page: www.golfmechanix.com/Items.asp?Pdts=03&CatDescription=Frequency+surveying+instruments