Fifflepede

Пікірлер

@TiHKaL42 Ай бұрын

Great video thanks.

@april7_ Ай бұрын

You seem to need to do rear breaks too soon! 😄 almost all gone!

@fifflepede Ай бұрын

I know, I just did the brakes yesterday!👍

@firomsatajir7101 2 ай бұрын

can you sell it to me, my brother

@maxkoroljuk1622 2 ай бұрын

Помог👍👍👍

@ShiftedReality90 3 ай бұрын

Hi, would this work for a Yaris T3 2004? My car has central locking but I don't have a remote key and Toyota can't get me a working fob. Thanks

@fifflepede 3 ай бұрын

Hi, yes it will definitely work, it was the same for me, the car had remote locking but previous owner had lost the fob. Not sure if the wire colours will be the same though. Good luck with it 👍

@craftycampers2615 4 ай бұрын

So handy this video!

@Muhammadameen590 4 ай бұрын

❤❤❤

@PedroSantos-br6gf 4 ай бұрын

Thank you for your patience recording, explaining and sharing the video.

@fifflepede 4 ай бұрын

Thank you for your kind comment. Even if it only helps 1 person then it has been worth the effort 😊

@AhrnNilsson 6 ай бұрын

Hardest part was to remove fan right? Do you need any special tool or was it all normal spanners?

@fifflepede 6 ай бұрын

No special tools, just a spanner and a hammer 😁

@TarandeepSingh-eg9rn 7 ай бұрын

When changing timing belt do you have to change water pump?

@fifflepede 7 ай бұрын

No you don't need to, the water pump isn't run off the timing belt and it is very easy to access (it's what the fan is bolted to) so I wouldn't change the water pump unless it is faulty.

@HY173 9 ай бұрын

Cool Video, thanks. I have also to change to oil seal behind the dual mass flywheel. Do you know the thghtening torque for the screws? Another question, how do i know if i need a 235mm or the bigger clutch? Im getting both offered via online parts shops. Thanks

@fifflepede 9 ай бұрын

Thanks, I'm not sure about the torque spec. I couldn't find any info online so I ended up just guessing and tightening things to what felt right. I was offered 2 different sizes of disc, I guessed at the bigger one (cheaper one) and ordered that but when I got the old disc out I saw I needed the smaller one! You might be best to contact toyota with your vin number, they should be able to tell you. I don't think Toyota share much info with parts shops.

@HY173 8 ай бұрын

Alright..thanks.its interesting. I searched via VIN. When i zake the original clutch disc number, i get a 235mm clutch. When i take the original pressure plate number, i get a clutch set with 240mm. I guess i have to order both and sens then one back. Anyway, thanks again for your great video

@larrys7396 Жыл бұрын

Can you show me again a little slower and tell that wire goes where

@palse281 3 жыл бұрын

C1435 yaw rate Corolla le 2014

@riyhanali40 3 жыл бұрын

where is the fuse

@sundsvallharnosand6286 4 жыл бұрын

Bra jobbat

@cyrchung2 4 жыл бұрын

How to connect the indicator lights? I connected, but they don’t work. Do I need to install a relay between the light and the box?

@nunoaquiles81 4 жыл бұрын

Thank you. It helped me a lot. Saved me a lot of time.

@smartchip 4 жыл бұрын

Thank you very much bud, nice one,

@carlosleal7g 5 жыл бұрын

Hello, I also have a 2004yaris but the drivers door is only manual. Do I need to buy an electric door lock actuator?

@fifflepede 5 жыл бұрын

If when you lock the drivers door all the other doors lock as well, then you shouldn't need an actuator. I'm not 100% sure though, someone else might be able to give a better answer.

@carlosleal7g 5 жыл бұрын

@@fifflepede the thing is, the drivers door doesn't have an electric motor

@carlosleal7g 4 жыл бұрын

@@fifflepede installed and everything works. Now I also wanted the blinkers to flash. But seems a lot of work

@milen953 5 жыл бұрын

On my yaris year 2000 the lock wire is the grey one(splice with white/black stripe wire from the module). The brown/yellow stripe do something else. The unlock wire is green/black stripe(splice with white wire) of which you will have 2 of them you can tap in eigther. You also need to connect your yellow and yellow/black stripe to the ground (that is for the Flexon central locking module) as the system is negative triggered just like your one. I didnt bothered with the blinkers, but i assume there will be slight differance in the wiring color code there too. Pro tip: you can use sewing needle to tap in the connector to test if you have the correct wire before splicing in it. You should also look for a wires with constant 11.5 volts. You can measure when your multimeter is connected to the positive and test with the needle on the connector.

@poonjh95 6 жыл бұрын

hi, may i know how do you do the wiring? is it the same for a 2005 yaris? thanks

@2vv1Deven-Goinden 6 жыл бұрын

Very useful indeed! Thank you very much!!

@TheA51fnr 6 жыл бұрын

No problem. Used the 2 yellow wires connected to the black earth. The diagram indicated they were earth. I hope. Didn't bother connecting the indicators. Seems to lock and unlock ok. Hope it doesn't cause any fires 🙂

@TheA51fnr 6 жыл бұрын

is it possible to indicate which wires to connect to the lock and unlock. is it just the white and white/ black wires only

@fifflepede 6 жыл бұрын

it's a long time since I installed it and it's my wife's car so can't check right now, but i think it was just the white and white/black. Sorry, my memory's terrible! Will check when I get chance and post back. Cheers

@Romka0414 6 жыл бұрын

Thanks very much!!!!very helpful information.

@davidcahillegan6366 6 жыл бұрын

Used this video today to add keyless entry to a 2002 yaris..excellent vid...very helpful...11/2 hours in total...thank you

Ең жақсы KZbin

Пікірлер