Ufish2

Пікірлер

@lindanihill8843 6 ай бұрын

Nice video. Are your 3 anodes the same part number? Our F100hp (172 hours in 10 years) cylinder head corroded through to the water gallery (welded to repair at our cost) The original anodes (part number67F-01 no sign of wear) were replaced with 68V-01 anodes. I was told by my outboard motor mechanic it was a known problem by Yamaha.

@ufish2190 5 ай бұрын

I am sorry unable to say part number as sold that motor about 7 years ago. It is important to check every service and clean or replace the 3 internal anodes on the power head, 2 at the rear and 1 at the side. I understand the 80hp is a derated 100hp

@joachimcoonan6255 6 ай бұрын

I lived in Noosa for 6 years plus, and just wished to say that this wave has far more power than it may seem. The whole place is just paradise...

@ufish2190 5 ай бұрын

Totally agree! We have it good

@ufish2190 8 ай бұрын

Thanks Gary. You pretty well summed fishing up. I hear your love for the whole experience of boating and fishing. Nothing like it hey, especially when the fish are biting. Appreciate your comment.👍

@AttitudeAdjuster 9 ай бұрын

New Subscriber, wow that looked like an amazing trip, You certainly aren't put off by the Lumpy bits LMAO, I remember the days when we fished that kind of lumpy stuff and now we whinge about it, HAHAHAHA I guess we got softer in our more experienced years. Thanks for sharing such a great video of real conditions and commitment to the sport we love so dearly, You can't beat those perfect times when it glasses off or mornings and evenings on the water. Cheers Garry

@MrSouthern24 9 ай бұрын

Hey mate where are the GPS marks

@user-qt9zl2uq4i 10 ай бұрын

Cood en clear video , but you didn't installed the impeller blades correctly .

@ufish2190 8 ай бұрын

Thanks. Sorry about the late reply. What were you not sure about with the impeller?

@dougs_urbanfarm 11 ай бұрын

Hey mate what brand of fish grippers are the ones you have, they look pretty strong. Some nice fish there.👍

@stuhenry7452 Жыл бұрын

Excellent video 👌

@ufish2190 8 ай бұрын

Thanks for your comment. Appreciated.

@TheeDanIslander Жыл бұрын

Can you please tell me the numbers on your CDI? I have a 2001 90hp mercury and my CDI fried and the Yamaha CDI is 484$ and mercury one is 759$ but I’m only 90 percent sure they are the same due to them basically running the same engine those years… my mercury is identical to Your but mercury stamps …. But I just need to know if factory part numbers are interchangeable

@ufish2190 8 ай бұрын

Sorry about very late reply. I have sold the 80 and now have a 115. and I am sorry cannot help you on that one.

@andrewbonney6208 Жыл бұрын

Is that austraila east coast

@ufish2190 8 ай бұрын

Yes

@crispernator Жыл бұрын

Gday mate just revisiting this video ,i have just recieved my new 40hp and with all new toys you want to pull them apart and see how they work to a degree , i was looking at the anodes on the schematics for mine and noticed there was an anode underneath the plastic cowling just on the base below the motor .Now if you didnt look at the schematics you would never even know it was there and to be honest who ever takes the cowling off ,only when you need to remove the motor just thinking it might pay to have a look if you dont know about this anode and see if there is one under the cowling on your motor .

@ufish2190 8 ай бұрын

Thanks appreciate your sharing this. I now have a 115 Yamaha 4 stroke and finding ALL the anodes was not that easy, as there are quite a few. I hope to do another vid on this a bit latter. I am sure 115 owners will appreciate knowing where they are. 👍

@sebsadventures41 Жыл бұрын

Thanks one of the best videos I could find. I have the same motor as yours (carby) We just bought the boat and going over invoices, on the last one says that the gearbox seals will need replacing at the next service Now I went to Yamaha and asked for seals and they give me some small o rings… Can you please confirm what seals are required for the gearbox? Thanks

@ufish2190 8 ай бұрын

I have to apologies about the late reply. I sold my 80 a few years back and now have a 115, I am unable to help you on this one. I do appreciate your comment, thanks.👍

@wattsdronewilltravel3881 Жыл бұрын

Nice video… just a fyi, if you tilt the engine up and remove the drain plug, you can then lower it and let it drain. Saves a bit of a mess. ✌️

@ufish2190 Жыл бұрын

Thanks for the tip.

@demetresichinava5088 Жыл бұрын

👌👌👌👌

@ufish2190 Жыл бұрын

Thanks.

@demetresichinava5088 Жыл бұрын

👍👍👍👍👍👍👍👍👍👍

@ufish2190 Жыл бұрын

👌Thanks

@ufish2190 Жыл бұрын

Thanks again for all the thumbs up

@foolishchook Жыл бұрын

Some good fish caught. I featured in your video at 3.38 ...haha

@ufish2190 Жыл бұрын

Thanks.

@crispernator Жыл бұрын

Gday mate this is a really good video on showing how and what to check as routine maintenance ,this is the first one i have seen showing the actual anodes and what they do .Did you replace that really manky one ? I am about to take delivery of a 2022 40hp yamaha first four stroke and seeing yours has 700 hrs on it i rekon i have made a good choice you do relize the puritins will be having a fit " your not using genuine parts or oil your motor will be ruined " i say bollocks to them i use penrite oil in my vehicles and will use it the yamaha done all my own servicing since i was 16 now 63 never had a problem again this is a great video for teaching .

@ufish2190 Жыл бұрын

Appreciate your comments. Did I replace manky anode...no. There was still life in it. I do clean them up though as they work better. I think from memory I replaced them at 1000 hours. I eventually sold the 80 (still not missing a beat) and now have a 115 four stroke. The anodes are more trickier to find so will do another vid on servicing the 115. With the oils I believe its important to stick to either mineral or synthetic not to change them about. So I am lead to believe. Have fun with your new motor👍

@ufish2190 Жыл бұрын

My memory failed me I replaced anodes at 700 hrs

@crispernator Жыл бұрын

@@ufish2190 I have to say that is one of the cleanest best looked after engines for its age i have seen ,some you look at people have more money than brains or just dont care my last engine was a enduro over 10 years old but looked like brand new the guys eyes nearly popped out of his head when he saw it .

@ufish2190 5 ай бұрын

Thanks. I agree. These motors are not cheap

@ap4802 Жыл бұрын

What do you use as a lubricant protectant?

@ufish2190 Жыл бұрын

I use similar to a WD40 with Silicone.

@Tom-np3en Жыл бұрын

The fish is a blue Māori cod

@ufish2190 Жыл бұрын

Thanks Tom. Appreciated

@Lime-Spider1959 Жыл бұрын

Cattle Dog Cod ?

@user-kp2ee8bq5q 7 ай бұрын

Purple cod

@rayjames9835 Жыл бұрын

🙏👍

@ufish2190 Жыл бұрын

Thanks Ray

@deedeelemons2035 Жыл бұрын

Matey, love the information on your holiday and tube , but the fish cemetery, broke my heart in some what way, I’m a keen angler but NO, is a true vision of take what you need, hey, I’m sad for Stanage Bay!

@ufish2190 Жыл бұрын

Thanks. Yeh fish cemetery really different. A lot to explore there not enough time

@Ange-zip Жыл бұрын

Hello sir could you please tell us what is the extra item under the back of the boat is used for.? I have the same sort of make and model as yours .it appears to be an extra flotation device . Where can I find this item thankyou. .

@ufish2190 Жыл бұрын

Hi. Yes it is for flotation. These totally stabilize the boat at rest and is effective in lumpy seas lifting the rear end of the boat. I made them. Obtain a block of foam, shape it, then fiberglass. Silicon works wonders attaching them to boat however 2 stainless screws are used also.

@mattikujanpaa Жыл бұрын

how long ago was this

@ufish2190 Жыл бұрын

the clue is in the marina

@foolishchook Жыл бұрын

@@ufish2190 I'm 99% sure it was April 2013 14-16th?

@theantspants1 Жыл бұрын

Great video, How much fuel did you use? did you cross at the 4 mile or the 13 mile?

@ufish2190 Жыл бұрын

Thanks. It can vary depending on how much we run around out there. Some time we look for new ground and use more fuel. Other times we fish what we know. I guess average 130-150ltr. Mostly cross 4 mile.

@lewp4567 Жыл бұрын

I reckon Down at double island point would be pumping then

@ufish2190 Жыл бұрын

without a doubt. I wonder what the crowds were like?

@Toonz832 Жыл бұрын

This is so cool!! Wish I could catch stuff that big, keep it up guys !

@ufish2190 Жыл бұрын

Thanks. Truth is ... we don't always catch fish like that. Wish we did! Some trips can be good though.

@christopherhonor2410 Жыл бұрын

how far are use out from Fraser, I've got a 4.3mtr tinny with a 40merc tiller steer, I'd drive from Hervey Bay all depending on weather and how far from Fraser

@christopherhonor2410 Жыл бұрын

I got 10mile out from bundy

@ufish2190 Жыл бұрын

Hi Christopher. We are a fair way out. I would put my 18' boat as a minimum length to be out that far. On a dead flat and windless day I understand there is fishable country not far off shore.

@mhfishing. Жыл бұрын

I like the content true blue fishing guys cheers.

@ufish2190 Жыл бұрын

Thanks MHFishing. Appreciate your positive comment.

@Servant_of_Christ Жыл бұрын

Get a gimbal... 🤮

@ufish2190 Жыл бұрын

I have one ...it's more of a case of put it on!

@brettellis1837 Жыл бұрын

2750 STABIE PISS IT IN ON THE WHITE CAPS LOL🤣🤣🤣😁😁😁 LOVE IT BRILLIANT VID LADS.

@ufish2190 Жыл бұрын

Thanks Brett. Appreciated

@brettellis1837 Жыл бұрын

@@ufish2190 all good love the vids brilliant work.

@brettellis1837 Жыл бұрын

@@ufish2190 GOOD TO SEE THE OLD SCHOOL AT IT THERE IS NO BULL SHIT.

@ufish2190 Жыл бұрын

@@brettellis1837 we enjoy your feedback. Thanks again

@crikeymacca Жыл бұрын

I think you might have your lbs and kgs mixed up

@brettellis1837 Жыл бұрын

I MISS THE BRAWN REELS. NEED EVERY BIT OF 38KG OF DRAG.

@ufish2190 Жыл бұрын

Interesting you say that.... as it was a good reel. The gears finally went after much use

@anthonycorboy5122 2 жыл бұрын

I've been to Hawaii surfing and its funny how they call it half the size until it is big then they call it 20 foot instead of 10.😊

@ufish2190 Жыл бұрын

I think the same, but then I am only an average surfer. I have to look at the face of the wave first to call it for half. Found an interesting site that gives an explanation on the thinking behind this subject. www.surfertoday.com/surfing/how-to-measure-wave-height-in-surfing

@burtbenz9964 2 жыл бұрын

Austin bludgers

@burtbenz9964 2 жыл бұрын

Super Tuff aussies. Do they have navy seals?

@burtbenz9964 2 жыл бұрын

Dedicated ocean freaks

@ufish2190 Жыл бұрын

@@burtbenz9964 some really are hey

@user-vw4hv4dj4e 3 жыл бұрын

Whats the tune m8. Sounds sick

@ufish2190 Жыл бұрын

Agree. A teenager made these tracks! I think it was a program? on computer

@sandroboy4307 4 жыл бұрын

bro i surfed granite ba yesterday it was pumping im only 11 and pepole were saing i was a ledgend and if u have surfed nosa u will kw how good some pepole are there

@ufish2190 Жыл бұрын

there are some great young surfers in Noosa

@Mark-ml3nv 4 жыл бұрын

in Ireland, we call that 4ft

@blonde335 3 жыл бұрын

Q. What do you call a 4ft Irishman? A. Anaemic.

@hawaiianitedivah 4 жыл бұрын

Yeah'p it looks like 6'ft - 7'ft hawaiian scale swell....not so big but fricking fun surf......

@upsidedahead 4 жыл бұрын

4:49 I was out that day, competing for the Pooman Award. Sadly tho, there were just too many others who were on a higher level

@ufish2190 Жыл бұрын

Hey...that pretty well sums up surfing

@geraldinehamilton1970 4 жыл бұрын

Sick waves mate!!

@colin1626 5 жыл бұрын

Looks super fun, and you only have to share it with 150 other people!

@ufish2190 Жыл бұрын

late reply, sorry. Now have to share with 250 other people!

@tenalock 5 жыл бұрын

Sick vi!. i drifted down from Tea Trees and got in pole postion here as the sweep was running, then kooked it (more like scared). It was all over lol. If you ever need need video music for free hit me up.

@ufish2190 Жыл бұрын

Hi Tena. Thanks. Thrilling to be just out in it hey. Do you have any similar music?