Thanks for the help, I'm not very handy haha but your advice did the trick.
@MrJustDIY3 күн бұрын
You're very welcome and Happy 4th Of July
@Hadiachan6 күн бұрын
Was able to tackle this using a small flathead screwdriver and some patience to get them straightened out. It might not be perfect but it's much better than it was. Thanks for the tip!
@Janna-jr8iz7 күн бұрын
Thank you so much for this video. It's so helpful. My ac is a wall unit. I'm wondering how to drain the water that got in from my spraying. I don't see a drain hole.
@Breezer568 күн бұрын
The rod is not to check if it's balanced. It is to check if the blade is bent.
@MrJustDIY6 күн бұрын
@@Breezer56 exactly
@rondohunter896612 күн бұрын
I have three window A/C units I've collected over the years; some were purchased, some donated. Over the years each one of them has been removed from the window and placed on the lowered tailgate of my pick-up for disassembly and clean-up. Instead of store-bought expensive A/C cleaner I went with vinegar with a little bit of Dawn and baking soda. Spray down everything that's dirty, wipe down what you can (Q-tips are handy for those tiny, hard-to-reach areas) making sure to get all the black, brown and green spots...that's mold. That's what stinks. In Florida I let it set for about an hour to dry. Back in the window, back on high until it expires then off to Walmart for another.
@user-es4nm2qo9u16 күн бұрын
Hello Sir i have a vt commodore and my steering wheel is shuddering when im on the brake , i took the front wheel of today and there was play from side to side but not.up.n down does that mean my wheel bearings are gone?
@MrJustDIY14 күн бұрын
I would say tie rods
@alcameron607116 күн бұрын
That's a great video. I like that tool better than the one that spins because you have to go back-and-forth with that one. This one you just hold the square in my mind squares up that wheel much better than going back-and-forth with that roller type dresser. Good job.
@MrJustDIY8 күн бұрын
Thank You
@wm.dennis17 күн бұрын
That thing is $60 now…after the rebate.
@MrJustDIY8 күн бұрын
Yeah it's crazy how the prices went up so much.
@aronkoppold398119 күн бұрын
Use Red loctite if you don't have a lock nut
@macswinford331520 күн бұрын
Perfect. Just what I needed to avoid any surprises. Screwdriver stuck down the holes to keep it from reeling out was key.
@MrJustDIY8 күн бұрын
Glad it helped
@tinacook297821 күн бұрын
How do you clean the back part (where the water lands)? Mine keep getting pink slime, and I have to remove from the window and pressure wash, it's so much work. Can I spray bleach and water in there? Thank you
@Jaco368822 күн бұрын
Everybody’s so proud that they got soaked for $100. 🤷♂️
@dave517628 күн бұрын
I bought the same balancer on Amazon for $32. And why would you want to change out the magnets?
@MrJustDIY24 күн бұрын
Eventually they start to get weak and I’ve had one break before
@jmbulanАй бұрын
What if the tire moves in all directions including the strut tower
@MarySullivan-bz8efАй бұрын
I have an iHeater and it is different from the heater you are demonstrating. I cannot figure out how to get the back off to get to the reset button or to the bulbs. Can you help? Thanks.
@joey_bag_a_donutsАй бұрын
i have a brabd new 24k btu window unit. never been used. the display turns on but nothing else.
@laurenbird8417Ай бұрын
Thank you. This helped a lot. Trying to catch a possibly rabies infected animal. Appreciate it very much. This is the Lord's work you've done. I got bitten and I can't afford to have rabies shots. Plus I've had rabies shots before as a child and do not want to go through that again unless I have to.
@MrJustDIY8 күн бұрын
Glad it helped
@joleneweaver7578Ай бұрын
Mine only cool on level 10 any suggestion
@SouthernTee71Ай бұрын
Thank you! I wanted to know about cleaning the outside. 🎉
@awdtsi42o612Ай бұрын
Thank you!
@MrJustDIY8 күн бұрын
You're welcome!
@johnh9507Ай бұрын
No one shows how to adjust that metal arm there's two little tabs on that plastic vein
@Jader47Ай бұрын
TRILLEEEER.
@mrsgeorgestraitАй бұрын
Many thx! Even I can clean mine. FYI: let all parts dry before plugging in. I hope you unplugged too! Thx for the links too.
@muddymudskipr2 ай бұрын
I know the balancer operation is self explanatory, but wanted to see one in action b4 buying. Looking at the MaxPower one myself. Thanks 4 the video friend.... GO CATS! (noticed your shirt ;)
@MrJustDIY8 күн бұрын
You're welcome Thanks I have a bunch of shirts from trips to Kentucky
@Yukimi63452 ай бұрын
What is the model number of the window air conditioner in this video?
@rolandmatamoros36582 ай бұрын
What if you change the uppers and lower already
@paulbrodzik31282 ай бұрын
Thanks!
@BIGMIKE37372 ай бұрын
My tire almost feel off while I was mowing didn’t know that’s all that holds them off to part store tomorrow Thanks for video
@MrJustDIY8 күн бұрын
Glad to help
@dakotajo10162 ай бұрын
Both of these videos are Great!!! I really do miss that A villa track so much and wished it was still there!! I would go all of the time!!!!
@MrJustDIY8 күн бұрын
I spent a lot of time at the track.
@paulie2tanks2 ай бұрын
MrJustDIY, Very helpful video! Thanks!! Can't wait to try mine. Paulie
@MrJustDIY8 күн бұрын
Glad it was helpful!
@ronniemcknight60232 ай бұрын
Very informative information, ty
@ChrisP.Bacon12 ай бұрын
So mone wobble a bit left to right is that tie rods? Not a lot of play just a bit and nothing up an down
@lowellwhite88102 ай бұрын
You're a kind person. Lots of shops wont work on this inexpensive stuff. Best wishes to you
@randycordes4642 ай бұрын
Thanks for the video I will check mine out
@xtheshredderxx54732 ай бұрын
Tucker Carlson is incredibly talented. Had no idea he was so handy
@aaront30132 ай бұрын
thank you that was a good lesson
@terristenacious22792 ай бұрын
That cleaner is nice.
@jeantarry67262 ай бұрын
I noticed that you didn't rinse the inside after spraying with the cleaning foam. A previous video i watched used a spray bottle of water to rinse. Does it matter? Thank you for this excellent, step-by-step, detailed video! Also for the links, which i WILL use!! 👍👍👍
@ChickenPermissionOG2 ай бұрын
plastic case for 200 dallor tap and die set.
@jerryb58382 ай бұрын
Buddy, go buy life insurance, because no jack stands under that truck means no longevity for you.
@AndrewGreenaway19 күн бұрын
He didn’t raise the truck
@NickSlingerland-yd8hy3 ай бұрын
Thank you
@RogWatters3 ай бұрын
Why not a bad plug ?
@robroten64463 ай бұрын
EXACTLY what I needed to know. Well done. Excellent.
@AStanton19663 ай бұрын
Thanks for making this nice and detailed.
@IMARBAN3 ай бұрын
Awesome Video...‼Thank you So Much‼
@MrJustDIY3 ай бұрын
Thank You
@thomassmearcheck28193 ай бұрын
I have a bowtie hole blade on my honda will it work
@MrJustDIY3 ай бұрын
Yes
@thomassmearcheck28193 ай бұрын
thanks
@donnorris6843 ай бұрын
What if you have the other type, I have already changed.
@JoshuaAndMom3 ай бұрын
That's why you should save your money and buy a STIHL, Echo, Husqvarna, Shindaiwa, or a Redmax
@MrJustDIY3 ай бұрын
Definitely
@jaydowwg81503 ай бұрын
Size?
@MrJustDIY3 ай бұрын
I don’t remember and I don’t have it anymore. I’m not sure if harbor freight has them anymore