Never use torch tip cleaners on your jets it will hog them out and mess your carbs up this is a video on how not to clean your carbs.
@joschmoefrompickletoe25626 күн бұрын
I filled my 4 winns freedom 150 today then when we got to the lake I stood on the boat n it came our the bilge hole on the side. ? Any info on this
@daisonclemens387316 күн бұрын
Somehow managed to do this with one one flat head screwdriver . I have no idea how i didn’t trash the tube I was not being gentle🤣
@gregwun714518 күн бұрын
Are you guys still selling parts?
@fredgoulet818519 күн бұрын
Is the extra spacer player not required for the ball mount on the trailer? I’d rather only drill 4 holes vs the 8 holes on the spacer.
@fredgoulet818519 күн бұрын
Spacer plate… not player
@thefix257321 күн бұрын
Harbor Freight has one, $27.00. Same as I can tell.
@michaelgarrison703127 күн бұрын
What engine size is this
@MrBusy4272 ай бұрын
Good little engines closed cooling system , had a Four Winns Horizon 190 and it would do 43mph no issue
@jamesfranklineubanks37252 ай бұрын
doesn't have to be goodyear . The sizes are 21x7-10 front and 22x9-8 rear
@jamesfranklineubanks37252 ай бұрын
Got any sources for the Goodyear ATT 901 and ATT 902 for 96 honda fourtrax?
@allenl93722 ай бұрын
How to keep e-scooter tubes from popping, they don’t have a nut on them?
@coolfetus67333 ай бұрын
Awesome tutorial!
@budreimer2333 ай бұрын
What does NHS mean on a ATV tire
@samkaplitz90363 ай бұрын
I never did it that way......1975 TS-185
@WackyWizard1233 ай бұрын
I am 14, and so far it is the BEST one out here to me!!!! Tysm
@WackyWizard1233 ай бұрын
I didn’t even do it yet
@zebulon2.1984 ай бұрын
Did I misunderstand? 4 wheel drives need to be the same size or there will be trouble. Good information otherwise.
@1966cambo4 ай бұрын
thanks a lot for this video! I could not figure out how to put mine back together but after watching this I am sure I can!!!!
@PHope-sl4nj4 ай бұрын
Battery Acids Can Be Corrosive.
@josephfarr29885 ай бұрын
Can you just replace the shock without dropping the track or skid?😊
@TAA-Danny5 ай бұрын
What are the chances you still have these pipes?😂
@rapaent5 ай бұрын
Great video! My rule of thumb is to adjust until finger tight. Tahnks... Great job. 👍
@octanezsr17185 ай бұрын
When I try to get to the spring and replace the lever It’s stuck on. Any ideas?
@braden9659Ай бұрын
Yeah dude just tried to replace mine now I don’t have the spare length of line to set it back in let me know if you find a solution
@whatisdreup25 ай бұрын
Bro just save me from calling customer service and curse every one out 😂😂😂😂😂 I said white! Not blue!
@elmerfudd76745 ай бұрын
Whenever someone is wearing there hat backwards like a gangbanger move onto the next video.
@joshgessinger45095 ай бұрын
Been a amsoil dealer at one time always loved it and its a great oil. But that being said have u seen the price of it now. Its out of control when i can go to O'Reilly Auto parts store buy Mystik full synthetic for $35 a gallon. Or they have lucas for $40 a gallon full synthetic. Both great oils my father runs in his Etechs i run it in my Ctechs with no issues.
@TB12DAGOAT5 ай бұрын
Thank you so much for taking the time to make this video
@alphachad66265 ай бұрын
I have a set of these pipes and can. I am very curious if I need to re jet my carbs with these pipes?
@666Coldshadow5 ай бұрын
Wow this video helped so much. Thank you. I was trying to cool the wire on the other side. Thanks again so much!!
@farmerryan1825 ай бұрын
Dude this was the only video that showed me how to do this without me wanting to start the snowmobile of fire
@danielwersing87145 ай бұрын
Excellent video. Thank you
@cooper_larsen56 ай бұрын
Make sure to make a sturdy knot, just got my engine put back together and the pull rope fell out not too long after
@ringgap6 ай бұрын
now show a wornout standard tip, you know
@dMaxJunkie686 ай бұрын
Wow awesome! Thank you. After trying myself and bleeding I’m much happier my greasy triple is one step closer to starting!
@watsonian56696 ай бұрын
Great down-to-earth description and video, but dude get some rust-kill, my OCD is going off tap.
@coolmamaass6 ай бұрын
Very helpfull this video is great, my ´97 xlt limited just got reverse install and somehow the track got loose after, now it has the right tension thank you .
@peterg.20816 ай бұрын
For the price it cost to pay somebody to rebuild the shocks you can honestly buy all the tools plus the nitrogen to do it
@manuek38056 ай бұрын
a real hero ty
@dand45646 ай бұрын
Very helpful. Thanks
@rogersingley38786 ай бұрын
Thanks for having everything read to come off . Good info Thanks
@charliepalmer24657 ай бұрын
I know this was made many years ago , but that is perfect for my question, hows the feedback been on these tracks ?
@Adabulldoya7 ай бұрын
I remember my grandpa had a bunch of riding lawn mowers and a ton of land I always had to change tires I was only about 8-10 when I first did it myself. I just figured it out grabbed some screwdrivers and popped it off. Took some figuring out. So glad we have stuff like this now to show everyone
@atonyrodify7 ай бұрын
Hello! Are the rear cv axles the same length for 00/04 models ?thanks for your time
@ShiestyMadMaxx8 ай бұрын
What happened to the new videos
@trevorrowe62318 ай бұрын
What oil do you use in the chain case after you had it all apart?
@MattB7875 ай бұрын
Some people run ATF, some 80w-90, some mix the 2. No need to buy anything expensive, especially if you have a drain plug - it's so cheap and easy to change it out every season.
@MRjeep-pr7dx8 ай бұрын
Thanks for the tips man! Just got stranded on the side of the road with my KLR 650 a week ago without a tube or any tools... Never again!!! 🤦🤦🤦 💪👍✌️
@bearsmartdurango8 ай бұрын
Does the new one go in easy?
@bearsmartdurango8 ай бұрын
I wish all repair video were like this. Thanks!
@user-pq3ze2zx6c8 ай бұрын
I have gas coming out of the top vent line do you know what causes that
@brandenwhitley83288 ай бұрын
DO NOT YANK ON THE AXLE YOU WILL BREAK IT (found this out the hard way)