Honestly I'm new to Pine Flat, my buddies live near there, first time on the lake, they often do well there. We were getting hit on top water and dropshot. Best of luck!

There are several places to access the river, on road 600 there is a monument and a trail.

Yes, there are some easements along the river and private property, but getting on these areas are sketchy unless you know a property owner. I was able to sample a property and wow, I would have loved to workout a deal with property owners and dredge the area.

@@UncleChuckApproved sounds like fun

You can go here and make your own stories, every time I sluice the EF I find something, never a lot, but at least color.

I experienced the same, and shoot the jsb heavy and 1 inch groups at 50 yards, 1 inch at 100 yards but wind would throw pellets everywhere. I added heavier hammer, large plenum which is a little larger than two plenums to bring up velocity I have several weight NSA slugs, hybrid, H&N and couldn't group well. I am using 600mm barrel, carbon fiber sleeve with barrel spacers at the end, so I bought the slug barrel with a sleeve, spacers, nut and o-rings to be able to change without removing the scope. Sadly I have not been able to change and shoot the new barrel. I am able to shoot 36 grain NSA slugs at 1050 FPS.

@@UncleChuckApproved daaaamn 1050 with 36 grains?!?!?! You are pushing the dreamline haha, are they grouping wel?

Thank you, I didn't edit much at all, it was my first time there so the video is exploring mixed with video I intended to make clips. I find the story and area so fascinating. RIP to all those that lost their lives to this catastrophe.

This gun is unregulated, I fill the gun at 240 barr.

I much prefer moly paste for metal on metal components I.E. the piston, piston rod, I use Dow Corning Molykote 55 on the bolt probe and moly paste on the bolt action.

There are bolt action models, but I doubt they make sub12 guns.

@@UncleChuckApproved their all available from AEA themselves on import, most of em can be sub12, the smaller folding ones will be limited to sub 6ft/lb as it can be fired folded, if it was higher power it'd be considered a firearm, could get round it by fitting a solid stock but it's the semi auto I want but these are deffo considered true semi auto unfortunately, huben gk1 perhaps😍

I think I would spend my money elsewhere for sub12, the thing that makes these guns worthy is big bore power vs cost or semi-auto otherwise there are better options in my opinion.

Sadly no, proprietary.

Follows camp is private property, a lot of people explore the area, to bad so many vandalize everything.

@@UncleChuckApproved So I guess if one wanders around nearby areas the Rangers are okay with that....

This is historic Follows Camp, the building was the store, there was camping, gold panning, I used to go there as a kid, I still visit the area and some times sluice & pan for gold.

I've been through here twice now staying in Yreka on the way to Portland to see my kid. This area consumes my imagination, I have prospected/mined gold in the past and this area is rich in history and gold. Thank you for the compliment, I was learning new video processing application so there are some strange coloring and artifacts.

This is DJI Air 2S, medium sized full featured drone, good camera decent flight time, very good flight characteristics, in my opinion one of the best gps camera drones, the Air 3 was released recently, slightly larger aircraft, bigger battery two camera I haven't tested yet. www.dji.com/air-2s

Hi just out of curiosity where are the old Chinese buildings at? I like exploring old buildings as a weekend hobby I live near grub gulch

I worked an easement/bridge with hand dredge and sluice down stream in-between private properties (it was a little sketchy, I would like to have cultivated relationship with property owners) and did very well, I would have loved to have dredged the down stream side of the corrugated tubes under the bridge...

​@@Palm-Pine-Aussieslucky you

FPE goes up with weight of projectile/caliber a longer barrel helps keep velocity up with bigger bore, I really like .25 for higher velocity and less drop in trajectory out to 70/100 yards. I don't hunt so FPE in not my primary concern, I will shoot a few birds or squirrels but that's it, but this thing will decimate rabbit size game.

This is 6.35 / .25, see comment to your other reply.

Preservation, rework if i recall. This was built in the 1921, the mosaic is stunningly beautiful and so very vibrant.

It was...

Apparently you do not understand dieseling. The vapor pressure and flashpoint of flammable liquids (oils and greases) can detonate under pressure known as dieseling. So what is it you looked up, bud? By crack barrel are you referring to spring piston airguns? Don't think just goggle, wtf does that mean? Wow

@@UncleChuckApproved Yes but look it up it doesn't work with PCP's they are compressed air not air being compressed and heating up air while doing so. Air already compressed really is cold. My gun is cold while my Dad's is Hot and his is a .30 cal crack barrel and after 10 shots hot gun.

@Dick Dyson I guess I can attempt to explain the science of autoignition here, if you have low flashpoint high volatile lubricants exposed to a pressure they can combust known as autoingnition. For instance diesel engines combust fuel by injecting fuel into an already compressed cylinder, there is no magic of the piston that causes ignition it is the pressure. I will give another example, at what temperature does water boil? That question is incomplete, at what pressure completes the question because water below 20 torr will boil at 70 degrees F. Vapor pressure etc etc etc. Spring piston airguns for a fraction of a second make very high pressure, much greater than pcp airguns, they are more likely to autoignite hydrocarbon based lubricants because of the very high pressure. But if you were to put WD40 a very low flashpoint volatile substance in a cylinder and pressurize it, it will autoignite, combust (diesel). Think, goggle, think some more, learn share teach, learn some more.

@@UncleChuckApproved It's fine, being wrong is wrong. I own my PCP and a crack barrel . PCP's don't diesel

@@UncleChuckApproved There's not one video with all the AEA air rifles and PCP rifles showing dieseling but only crack barrels , why? Show me a video with someone dieseling pcp guns OVER crack barrels. When you find this out and then do the research instead of assuming and thinking ,since compressed air equals always explosion when adding oil cause of combusting with pressure vs compressing air as fast as you can just might be a differences in sciences bud. Let it go, we are all wrong at some point. Hell, I was wrong about it as well, Not smarter by no means, just wiser now cause I do research on the daily about things. I used the old prove myself wrong meathead.

UTG from Amazon.

@@UncleChuckApproved Thanks.

@@cell_creator UTG Leapers MNT-DTW145 Inc, Dovetail to Picatinny Rail Adaptor, Black www.amazon.com/dp/B01ABW7GS0?ref_=cm_sw_r_apann_dp_AC8K8HVB2E6TRRZG8WND

High pressure cylinder causes pinging, one method is to install a bottle brush inside the air cylinder, some people have had problems with pieces of the brush coming a part fouling the valve, many others run this problem free. I do not have much noise with carbon fiber cylinder.

Not really, it is semi-auto, so after you pull the bolt back to load the first round, high pressure air cycles the action, which in turn the spring turns the magazine.

They're not even in stock most times I've checked. Doesn't make me wanna drop $600+ on a hp ss plus or the carbine when I hear all the issues with the magazines and know they only come with 1 or 2 magazines in the box.

It really is a sore point, the metal magazines are very superior and should be standard.

@@UncleChuckApproved I don't think it's an issue that Bin at AEA will try to fix. He's already moved on with the S45 and I think the HP SS series is discontinued as there aren't many for sale now at the dealers. And I can't find the metal magazines for sale. Evidently, the magazines are similar with the S45, but I saw a guy here on YT that printed up some stick magazines that actually work better than the rotary. Holds more pellets and unleashed more potential for the gun.

The assassin/ TD/ backpacker which are virtually the same gun cost $950. With donnyfl moderator.

My gun in .25, 50 yards MOA or 1 inch groups easily, shooting JSB 26 grain diabolo. This is shooting off hand, I have not shot it off of bags further.

If you are able to tinker, then these guns are a good value for being semi-auto. They are powerful, relatively accurate, and fairly priced.