@@chinothedon8276 I’m sure it does since they have the same body and bumpers. Thanks for watching.

amigo qual o nome do arquivo para atualizacão do painel?

I’m extremely sorry for the inconvenience, but upon checking The Nav Man website, it seems that it was taken down, there’s still the support website but not the shop. I hope they will bring it back.

@@aymericdelansalut2760 no it’s stock atm, i’m looking to get a stage 1 or a stage 2 tune in the future

@@Gearsandco go stage 1 with a gearbox AND ecu remap. Makes a world of difference w/o putting any unnecessary strain on the engine

@@aymericdelansalut2760 I would agree, but I saw alot of people with super high milage A4 on stage 2 with no problem, I would probably do the stage 2 supporting mods but with a stage 1 tune, this might give me the most out of it.

@@Gearsandco if you get the stage 2 mods (cold air intake, bigger inter cooler…) do a stage 2 reprog other wise your ecu will not tell the motor to take advantage of the additional air input

@@aymericdelansalut2760 yes I agree because too much cooling might negatively affect it but If I get a slightly larger intercooler it shouldn’t be that bad, and I would honestly prefer to do a dyno custom stage 1 tune, this way I’m still safe and also take advantage of the part I have much more than an off the shelf tune. It might be too hard to find a good tuner in my area to I might go IE.

@@natewalster5670 I got it from eBay, thanks for watching!

@@Gearsandco thanks! Do you have a link by chance? Also a link to your rear spoiler? The car looks sick!

I just added the link in my description. Thanks for your support!

@@LMRDizzy yeah it’s very easy to damaged them if you pull to hard.

Upon checking the website, unfortunately I don’t know what happened to it, it seems to be down at the moment.

@@丂卩丨丂 thanks, they are not branded I got then from Ebay

@@Roszz1 I used screws from where the holes are on the bottom plate and right through the wood

@@Shralps yes it does but I usually use apple CarPlay

@@v6xro Yes it is, I even hit a curb with it and it’s still holding up I don’t know how is it that good, this mainly because of good prep and cleaning with rubbing alcohol.

Just slow it down

bro was in hurry lmao

Pause the video and the tab of the video player will appear and stay fixed, then go to the right bottom corner of the tab and hit a icon looking like a Gear/Flower that says "Settings" then go to "Speed of playback/reproduction" or something along those lines (mine is in portuguese) hit it and choose the speed you want (less than Normal plays slower, bigger then Normal plays faster).

Thank you very much, This sound is from outside. I have a microphone near the exhaust.

Thanks 🙏, yes that’s all I did although I do prefer it to be a bit louder, I believe when I throw in a high flow cat it would open up the tone just a bit which might be enough. Will see

I respect that’s you’re opinion thanks for watching! I will end up getting something much nicer, but it’s not my priority for now.

Thanks 🙏

I agree with you, I think Audi didn’t even bother with insulating the sound system properly and used very cheap plastic!

Check my previous video

@@Gearsandco How do you update your software to get the layout? I also have a A4 2017, my software is like 0299 ​​​​OBDeleven said it has to have 0300, how do I do it friend?

Most likely the wood panels. I made a setup using AMStudio's design, and it's super stable. The only "flex" is within the pedals themselves, which you would also experience with the OEM setup

It doesn’t flex to much the shake is coming from the cockpit it’s self and I also got much stiffer springs than stock after over 2 months of use it’s been fine, although if you can find thicker wood it can be way more stable.

It’s been great in fact I hit the lips with a curb and it’s still held up lol 😂

2017

I would agree, I’m still working on giving the best experience possible thanks for the feedback 👍

Hi, you don't need a tune for that, the only exhaust part you would need a tune for is if you replace the cat to a catless or highflow downpipe.

@@Gearsandco thank you!!

Looks fine to me

Thanks mate, I'm deeply sorry but unfortunately, upon looking on my purchase history, the item is no longer available, I can put the link of the seller on Ebay maybe you can contact him and ask him if he can make or order them. www.ebay.com/usr/guangzhoutongxing2 copy this link it should take to directly to the seller I bought the item from. I hope you will find something that suits you.

The drone is definitely acceptable, it’s not too annoying I got used to it.

@@davidm848 Not really, but the main reason of doing it is just to be able to code the sport layout display.

I only used the screws that mount the 3 peaces together, but I only used a strong double sided tape to mount it on the car.

@@Gearsandco WoW that must be strong 3m tape! Question: How many inches does it lower the sides of your car? I ask because I go to a car wash that pulls my tires on rails and the rails are pretty close to my OEM lip.

Sure I will stay tuned

Do you know where to find it? I’m fairly new to it.

@@Gearsandco The App is executing a command to edit the EEPROM of the dashboard module (17). And that command is: WriteMemoryByAddress: 3D | Size of bytes to write: 1 | Address size (bytes): 4 | Address where data will be written: 03 00 3C 09 | Size of bytes to write: 01 | Value to write: 01. So we need to se what parameters to insert into the eeprom menu inside od the dashboard module, yes there is an option next to Coding and Adaptation called eeprom. My guess would be: Address: 03003C09 Length: 01 ALFID: 14 (default 44) And there we should se the changed values which before using the app was all 000...

That would be good

Sure thanks for the support

A4s don’t come with the sport layout display only the S4 S4 etc…

My bad 😂. Thanks for letting me know, I had to fix it anyway because even the color of the text was blended in the background, I made more readable as well.