Looks really good. how well did this hold up over the years?
@ericlewis503519 сағат бұрын
@@TurboV8boi the color and paint held up great. Never had any issues with it
@TurboV8boi19 сағат бұрын
@@ericlewis5035 nice. I'm gonna do the same process on mine then. I'm putting it on a 350z so I'm going to make it black since it'll be sticking out of the hood lol
@duranbailiff5337Ай бұрын
What kind of a car is that, brother?
@juanDM329Ай бұрын
How much trans fluid comes out and how much do you need to add? Is it like a complete trans fluid flush?
@jamieloeffler2504Ай бұрын
He uses a drill. 😅
@mylezzpurhourr2 ай бұрын
Installed this today on my 04 SS impala and wow it feels a lot firmer and shifts as if it’s brand new!! Easy install!
@johngrafton68684 ай бұрын
Use a longer tube and siphon it out
@lsrod96894 ай бұрын
I wonder why they made them plastic instead of metal
@JoseSanchez-iq8jd4 ай бұрын
Would this stop my hard shifting issue on my 05 lacrosse 3.8 …
@wilfredovazquez48045 ай бұрын
Did you ever finish installing it
@Mrrhockstar5 ай бұрын
I just did this repair on an 05 LeSabre the accumulator pistons were severely worn with the pins. I replaced the pistons pins and gasket along with this shift kit and it was a night and day difference in shift quality. The longest shift from 1-2 was 2.3 seconds! factory shift times are 0.3 seconds now my shift times are back down to normal.
@rambleon28384 ай бұрын
How many miles do you have on yours? I have a 2000 LeSabre with 78k and planning on doing this too. I have no issues with the tranny, though.
@inandoutofreal1ty4 ай бұрын
I have a 1989 Oldsmobile 88 with 80k. Wanna do this to extend transmission life, no transmission problems tho
@jeffb2435 ай бұрын
I know it’s been a while, but how are/did these headlights hold up? Do they fade fast, moisture getting in?
@osvaldogomez87535 ай бұрын
Que tal buenas, Disculpa tengo una duda, cuanto aceite lleva y cada cuanto debo cambiarlo??
@vortire60403 ай бұрын
No existe un verdadero intervalo recomendado por el fabricante para el aceite del sobrealimentador. Los profesionales recomiendan cada 50.000 millas o al año.
@chasepackard33115 ай бұрын
what did you use to buff/resurface the flanges on the snout and the throttle body flange
@ericlewis50355 ай бұрын
I used a Wire wheel on a dremal to clean throttle body
@stefan83578 ай бұрын
I have it to in my frontsplitter😊
@uriel00029 ай бұрын
Best video so far thank you .
@stevensolis65079 ай бұрын
How many coats of Clear Effex did you use before applying the clear coat?
@Casmige9 ай бұрын
That’s NOT “3M Tape” on it. Do some research about how goddamn expensive real genuine 3M tape is and then find out that they don’t redistribute out of the United States not to China, not to Vietnam, and certainly not the Korea.
@GageDelibro10 ай бұрын
Drop the chassis
@jeffb24311 ай бұрын
Easy!! Good idea using a Windex sprayer. Need to do this to my 2004 GTP
@johnoigreen1116 Жыл бұрын
Where did you get that trim from?
@ericlewis5035 Жыл бұрын
The copper rings?
@johnoigreen1116 Жыл бұрын
@@ericlewis5035 the gauge pods
@ericlewis5035 Жыл бұрын
The rings came with these SICKSPEED gauges. I just painted them
@johnoigreen11163 ай бұрын
I mean the 3 Gauge Pillar
@richardpaz8035 Жыл бұрын
Insanely good work bro 👏👏
@MegaCody83 Жыл бұрын
Haynes Manuel for a 2003 LeSabre says 96 inch pounds for transaxle pan bolts, so 97 inch pounds or 8 foot pounds sounds reasonable.
@12yearssober Жыл бұрын
From the looks of the fluid that transmission is not long for the world
@Dwalls710 Жыл бұрын
I’m trying to put a custom shift knob on my 07 chevy Impala but am lost👍
@3800Solo Жыл бұрын
Where did u get the gauges and the new trim piece ?
@ericlewis5035 Жыл бұрын
These Gauges are from SICKSPEED
@Minecraft007crave Жыл бұрын
Did that clear coat make a difference
@stevesmith6236 Жыл бұрын
No comments??? OK, even though I'm seven years late to the "party", I will say I got a couple good ideas for my current '99 GTP coupe build which ( hopefully) will be finished by Summer of '24 when my car is on the road. Hope there are some W body gatherings still happening and not too far from my Philadelphia,PA area.
@tcraskoutdoors120 Жыл бұрын
ik this is old but does anyone know if this adapter works with chevy cruze LT 2014 automatic?
@alvaroortega9643 Жыл бұрын
Perfecto 👍 saludos desde México
@arcentalesnoel Жыл бұрын
Where can I get the roof rails you bought?
@Pauleazy420 Жыл бұрын
Looks good👍 I'm thinkn about trying to get into doing this to make some extra money.
@t-pitz8866 Жыл бұрын
What would you charge for this job ? Asking for mechanic 3800 GTP
@deadmancustoms3120 Жыл бұрын
What adapter is this?
@3800Solo Жыл бұрын
Yk the part number for that ?
@stephendavidbailey2743 Жыл бұрын
Put strut braces front and rear on my 2002 GTP. Most noticeable difference was much reduced body noise. Seemed to respond a bit more precisely to steering input.
@nurko8463 Жыл бұрын
lmfao i love the NPC’s of this world who don’t let their cars RPM’s drop before shifting into any gears. Have fun ruining your cars 🤣👍
@mrbreezeet1 Жыл бұрын
Great video. Is it still shifting well? Question: does the piston seals/O rings come with the kit?
@ep9372 Жыл бұрын
No those are separate
@johnathan9101 Жыл бұрын
Due to similar lines I would have gone with an S15 rocket bunny kit.
@brycefletcher3085 Жыл бұрын
Tork converter bolt
@boostedkidproductions9719 Жыл бұрын
I appreciate the video just did this on my 03 Buick LeSabre it was shifting hard and sometimes slipping when accelerating from a stop it was easy before you do I recommend putting trans tune and drive alot for a few days then drain the fluid feels like a new car now haven't had any hard shifts or slipping
@BigWheel. Жыл бұрын
Is it Still holding up?
@BossPainter Жыл бұрын
Where u get them gauges???
@ericlewis5035 Жыл бұрын
I actually found this gauge cluster at a Junk yard. Found it this way. Now it looks totally different. I painted it and got different led lights in them
@christianmihit8582 Жыл бұрын
Would yousell the first one with compartment, grind one???
@OnlySubzz Жыл бұрын
Looks great do you sell those?
@ericlewis5035 Жыл бұрын
No I don't sell these or make any for anyone else. Sorry
@timosman91722 жыл бұрын
Same kit for the 4T65E HD?
@mrbreezeet1 Жыл бұрын
Yes!
@onestockg37102 жыл бұрын
Could you please tell me if the orange and black thin wires off of the driver are for turn signal? Thanks
@dontblameme63282 жыл бұрын
What is a buh in?
@dontblameme63282 жыл бұрын
That's some of the sloppiest tig welding I've ever seen on a supposed superior high end upgraded product.
@Jay-gf2cj2 жыл бұрын
Did your rear power log leak at the down pipe connection? Mine does