How would someone go about connecting multiple solar charge controllers to multiple bus bars which link large amounts of batteries in multiple strings? Just as an example, say someone has five strings of 100 amp 48 volt batteries connected to bus bars. How would someone charge all of these using the multiple solar charge controllers? How would they do it if they cannot find bus bars to fit the total amperage necessary to match the charge rate of the battery bank?
@phocos-global2 күн бұрын
Thank you for your inquiry, because of the technical nature of your question, we would strongly suggest for you to reach out to our technical support staff www.phocos.com/contact/#tab-contactech
@Elezampela14 күн бұрын
What charge controller do I need for my 48V 5kw Phocos inverter
@AlPottoff16 күн бұрын
Other videos srate that it’s not the voltage but the internal resistance of the battery that determines the output of the charge controllers. So having identical controllers is not essential.
@kurtklingbeil690017 күн бұрын
We are having difficulties with an AnyBridge: Connected to AnyGrid 6.5kW 48V 120VAC via RJ 45 RS232 cable Connected to AnyCell 5kWh 48V LFP ESS Green Power LED NEVER lights Yellow status LED is ALWAYS ON - no flickers Mobile Link App on Android can connect to AB and shows data from inverter however AB-PLC does not appear as a device and is not configurable and AnyCell does not appear as a device either I notice that the first connection attempt, we did not need to pair the device - it just connected automatically. SUbsequently we needed to first pair the device. With further farting around it appears that the AB does not properly gateway CAN2 traffic from ESS to inverter we get error 61 Even when pushing reset - no flickers from LEDs. It is interesting that the ANYGRiID does not show any status information of the AB - mandatory. Any ideas for resolution ?
@phocos-global16 күн бұрын
Thank you for reaching and sorry about the difficulties you're experiencing. Please reach out to our technical support team on our website www.phocos.com/contact/#tab-contactech
@zerdgeofficial23 күн бұрын
Dang this in morocco
@michaelchane2593Ай бұрын
i really appreciate your explaination which i have been looking for a long time...I do have an inverter with 450 vdc input and i notice even with the spd, the dc input alway get burn, now I understand that i have been using over rated spd of 500v and above
@phocos-globalАй бұрын
@@michaelchane2593 thank you for saying so!
@michaelchane2593Ай бұрын
@@phocos-global i have been unable to see spd of 450vdc.....what should i do
@OP-fd4lhАй бұрын
Thank you sir, this really helped me understand how this can work for future needs.
@phocos-globalАй бұрын
@@OP-fd4lh we appreciate your comment
@AlaskaBushLivingАй бұрын
With the cost of the freezer we added delivery fees by land and then river barge delivery fees, bringing the total cost of this freezer (FR350-B) to just under $5000.00...and now with the purchase of a new ECU it puts it over $5000.00. In the three years we have had it, it has worked a total of 9 months....Just installed the new ECU and it still doesn't work...installed a new thermostat and it still does not work. So, if you live remote like we do, I urge you to shop around for alternatives.
@marekstawicki8663Ай бұрын
Thanks for your videos, but please speak clearly and turn off that background music. It is difficult to understand you clearly at times.
@ZerpersandeАй бұрын
So for a main system with (3) 175W panels in series charging a 12V 230Ahr LFP battery, I could use my portable 200W panel to speed up charging?
@QUICKSILVER21242 ай бұрын
How do you factory reset a psw-h that is showing f90 as an error
@phocos-global2 күн бұрын
Thank you for your inquiry please reach out to our technical support staff. www.phocos.com/contact/#tab-contactech
@lg30532 ай бұрын
This is by far the absolute best video explaining these devices. However, what would have made it even better would have been to show how to connect the actual devices, and explaining that these are a onetime use for a large spike and they can't be reset.
@phocos-globalАй бұрын
@@lg3053 thank you for the feedback
@johnnyambi5502 ай бұрын
How to calculate soze of ac spd for type2
@NarinderSingh-pv5bc3 ай бұрын
His agent's service is so poor
@livingthelava3 ай бұрын
At 2:31 you address the noticeable different charging from different controllers. Many of us are calls this fighting and unproductive charging. Some controllers even have communication ports to stop this fighting. If you had a video addressing this subject it would be beneficial. I see quite a few of these are being made, and they don’t agree with each other.
@phocos-global2 ай бұрын
Thank you for the feedback this is something we would like to do with our tech team in the future. Its only a matter of time and resources.
@ENGLAWSSD3 ай бұрын
Am a technician in South Sudan, one of my customers bought the phocos any grid PSW-H 5kw and really nice, we request at least if you could adjust your business and establish a company show room in juba South Sudan we are ready to cooperate with you
@phocos-global3 ай бұрын
Thank you for reaching out! We are excited about your interest in Phocos. If you can reach out to one of our sales teams through our "Contact Us" page on our website you can get into direct contact with the team.
@GmanfromTexas3 ай бұрын
Hi, so i have a 24v 3000w PowMr inverter. I attached a portable 400w solar panel but there is no solar displaying on the inverter. I'm getting 36v on the solar terminals coming from the pannel but the unit shows no solar displaying. The grid is charging my 24v battery and powering load but no solar
@phocos-global3 ай бұрын
Hello and thank you for your comment! Unfortunately we cant speak to other products. What we can tell you is that 36v on a 3000w inverter is very low voltage which could be a reason why it is not displaying the solar. Feel free to contact us if you have interest in our Phocos products. www.phocos.com/contact/#contactech2
@GmanfromTexas3 ай бұрын
@@phocos-global thank you. That is exactly the reason. Thanks for your help.
@legend_x__3 ай бұрын
Hey bro i have 6.5 kw solar system it has a fronus inverter and 4 batteries it is not charging above 55
@phocos-global3 ай бұрын
Hello and thank you for your comment. We cannot speak to different brands of inverters. Unfortunately, you will have to reach out to the manufacture for this issue. Feel free to look at our Phocos website if you would like more information about our 6.5 kw Inverter. www.phocos.com/product/psw-h-hybrid-inverter-charger/
@ArifulIslam-fb4it3 ай бұрын
how much price inverter
@phocos-global3 ай бұрын
Thank you for reaching out! If you want to learn about pricing our sales team can help you with that! if you just fill out the form on our contact us page they'll get back to you as soon as possible. www.phocos.com/contact/
@dewshangayanka48554 ай бұрын
Thanks
@BlueSky-cy5nw4 ай бұрын
I have 12 panels connected in series, the total open circuit voltage of the panels is 578v DC. Would a 600V DC SPD be sufficient to protect my setup? Also what about the wire gauge of the ground wire, I am using 9AWG ground wire.
@ronaldfombe81955 ай бұрын
Hey. Thanks for this. How about charging batteries with generator? Inverter does not seem to take generator output.
@phocos-global5 ай бұрын
Thank you for reaching out! If the inverter is having a blinking AC icon this is indicating that the inverter is not recognizing the generator. If the AC input icon is blinking that means that there is something going on with the generator itself. The generator is providing too high or low of a voltage and frequency which is why the inverter is not picking up the generator. After checking these, test and verify the generator and if it does not work, feel free to reach out to our tech support at [email protected]
@MrPherez5 ай бұрын
Without solid state relay we cannot set up anybridge module?
@phocos-global5 ай бұрын
Thank you for reaching out! The Any-Bridge does not need a solid state relay as it connects to the RS-232 connection. The solid state relay is an optional feature that the Any-Bridge has. The relay can be set to work with the battery for either detecting the battery SOC, turning on/off the generator or the loads. It is not something you need for the Any-Bridge to work, as long as it has a connection to the inverter for it to communicate and provide data.
@bensonmkindi64016 ай бұрын
Thank you
@phocos-global5 ай бұрын
Welcome!
@aimclassesbybhanupratap6 ай бұрын
My PSW-H 5 kilowatt 48 volt inverter blast today please help
@phocos-global5 ай бұрын
Hello, thank you for reaching out! We'd love to go into more detail about your issue. Please reach out to our tech support at [email protected] so that we may better assist you and keep track of whats going on
@1kmkmkmkm8 ай бұрын
Hi, I have done the reset. But when entering my credentials for the wifi setup, the page just dissappear after I press setup and I do not receive an email?
@phocos-global8 ай бұрын
Thank you for reaching out to Phocos, In order to assist you we'll need you to fill the tech support form on our website phocos.com/contact/#contactech2. This will allow a record of your issues to be documented and ensures that someone in your region is able to assist with your model.
@1kmkmkmkm8 ай бұрын
@@phocos-global hi, my wifi was 5g. Your technician assisted me to use the 2.5G wifi and it connected like a charm! THANK YOU
@1kmkmkmkm8 ай бұрын
How long do u have to wait to receive the email after submitting your wifi credentials
@phocos-global8 ай бұрын
Thank you for reaching out! according to our tech team the email should come very quickly, within minutes. If it isn't received you should check your spam and maybe resubmit. You can also try the reset password option from the manual.
@1kmkmkmkm8 ай бұрын
Is the ssid the wifi network name?
@phocos-global8 ай бұрын
Yes the SSID is the Wifi network name.
@TravauxgoldMan8 ай бұрын
مرحبًا، هل يجب عمل تحديثات لجهاز الفوكوس عندما يظهر خطأ F90؟
@phocos-global5 ай бұрын
Hello, Thank you for reaching out. Please reach out to our tech support at [email protected]
@paulomock37418 ай бұрын
How many strings can I connect with one SPD. For instance, can I install three strings of 95V into one SPD of 500Uc
@phocos-global8 ай бұрын
Thank you for reaching out, There should be at least one SPD per MPPT input to the Inverter. The PSD is to protect the PV input, according to our tech team.
@qaisarkhan79428 ай бұрын
Thanks sir I have 6kv inverter. Our inverter is not charge the battery from solar pannel. I don't know But i connet utilise then charge from solar and house load transfer to utilities. But solar power available sapare more than 2000watt . Thanks
@qaisarkhan79428 ай бұрын
If utilities disconnect with inverter, Inverter also stop the charging from utilities
@phocos-global8 ай бұрын
Hello, thank you for reaching out! Because of the nature of your issue we must insist on you filling out a tech form on our website phocos.com/contact/#contactech2. This way we can get one of our technical staff to assist you further.
@garymaya17679 ай бұрын
LOL. so confusing. man, why the heck do they make words that make no sense. It's like say my i have a 1" inch thing but it operates at 12" or sometimes 0". see what I'm saying.
@factor26349 ай бұрын
Hi my inverter wont save the settings anymore
@phocos-global9 ай бұрын
Hello, Thank you for reaching out! We'd love to assist in any way we can. However, this account is managed by the marketing team, so in order to help you, we'll need to refer you to our website to fill out a form with the details and send it off to our Tech team for assistance! phocos.com/contact/#contactech2
@Tuupi09 ай бұрын
Hey, i have a problem with phocos inverter. I have uploaded shorts video about it, any advice?
@phocos-global9 ай бұрын
Thanks for reaching out! We've taken a look at your video and we recommend to contact tech support in your region. phocos.com/contact/#contactech2
@Black74c9 ай бұрын
What type of com cable is used between the inverter and any bridge the one you connect on the RS-232 port?
@phocos-global9 ай бұрын
Thank you for reaching out! it is a standard 1:1 8pin modular cable - a 1:1 ethernet patch cable will work.
@Black74c9 ай бұрын
@@phocos-global I have the same cable but the any-brige is failing to connect and read out datas of the inveter. I Have successfully connect the any-brige to wifi and successfully created the client's profile on phocus cloud.
@mikejohnson776810 ай бұрын
Mohamed, please help me with my solar layout for my van
@phocos-global10 ай бұрын
Thank you for your comment, in order to receive technical support from our team you'll need to fill out a form to submit to our tech team so that they understand the full scope of the situation www.phocos.com/contact/ please make sure to fill out the "contact tech department" form.
@mikejohnson776810 ай бұрын
Thank you, I,ll do that
@miguelRodriguez-t2f10 ай бұрын
"Fantastic news! The new firmware update for the Any-Bridge is a game-changer. The ability to have more control over our systems through remote control directly from the cloud is a significant step forward. Kudos to Phocos for their commitment to providing reliable and high-quality products. The automatic update feature for all Any-Bridges connected to the PhocosLink Cloud is a great example of how innovation meets convenience. Looking forward to exploring the enhanced functionalities this update brings to the table!"
@valeannicu966610 ай бұрын
Hello, Y have an eror code to an Any grid 5kw , eror code is F 90- wat is the meaning of this?
@phocos-global10 ай бұрын
Hello, thank you for reaching out! In order to get our tech team the right info you’ll need to go to our website and fill out the contact tech form at Phocos.com/contact. Thank you!
@valeannicu966610 ай бұрын
Y HAVE CONTACT THE TECH DEPARTMENT, NO ANSWER. I AM VERY DEDISAPPOINTED WITH THE WAY YOU MANAGE TECHNICAL SUPPORT, PRODUCT WARRANTY.@@phocos-global
@masendipatrick569011 ай бұрын
Hello if I accidentally updated my hybrid inverter with a wrong version of the software, how do I factory reset?
@phocos-global10 ай бұрын
Hello thank you for reaching out! There is not a way to revert to the previous version without performing another update. We would advise to just reupload the correct version
@danerobinson721411 ай бұрын
Thanks for the video but i need your help i have 2×200w, 1×265w 1×270w, 4×415 watt panels, 8×280ah lithium batteries series to make a 24v system so my question is what size charge controller will i need to run my system i have a 60a charge controller but i recently bought the 4×415 watt panels so how much more amps do i need to run all of my panels all of my panels are 24v
@phocos-global10 ай бұрын
Thank you for reaching out and sorry for the delay. According to our technical team, since you have chosen 24V panels, we assume you are using PWM charge controllers. We recommend to use a panel with a Voc about x1.5-2 the battery bank voltage when using PWM controllers, so, for a 24V battery bank system we recommend a panel Voc of about 35-50V. To properly size your solar system you should make sure that your charge controller can handle the full short circuit current of your panels when using PWM controllers. So, you should make sure that the short circuit current of your x4 415W panels in parallel does not exceed the current rating of the PWM charge controller you choose. If the short circuit current is 10A, and you have 4 in parallel, you will need a 40A charge controller (like the CXNup40) Also, make sure that same current does not exceed the charge current rating of your battery pack.
@SupportTech-vk1pq11 ай бұрын
How about the floating charging and equalizinh charging?
@GerenciadeOperaciones-Servolab11 ай бұрын
The inverter is capable to work only with pv power? Without grid as reference?
@Joeboat811 ай бұрын
Kindly read your manuals. Some of these new inverters can run without batteries or a/c input. So long as you have enough panels to generate the power you need it will run.
@SandiSchantz-m8c11 ай бұрын
dont understand and am more confused
@phocos-global11 ай бұрын
Please if you have any questions reach out to our technical team for clarity. www.phocos.com/contact/#contactech2
@rontech3411 ай бұрын
Question I have 2 PowMr 24v hybrid inverters 3000w each I have 24v 600ah Lipo4 battery bank can I connect both inverters to the 1 battery bank? But can I connect 4000w solar panels to 1 Inverter to charge the batteries ? The reason why because I don't want to split the panels in half and run another set of wires from my roof down to the garage it's to much work
@phocos-global10 ай бұрын
Thank you for your comment, unfortunately, we cannot provide any technical support for products not made by Phocos - But, if you were using 2 Phocos PSW-H-3kW-120/24V inverters, you could connect both to the same battery bank and then only connect solar to one of the two inverters. With Phocos equipment, it is not necessary to have the same PV power on each MPPT. Please visit our website www.phocos.com to see a list of Phocos distributors near you.
@mahlogonolomashilamokaba267511 ай бұрын
It is great information you give us, as you said we must make sure that our SPD a rated at specific value e.g if your PV is 95v is best to install SPD of 100v, what i will like to know is it recommended AC also to have 5v different or it can be more
@phocos-global11 ай бұрын
According to our tech team, Acceptable SPDs for PV are the Citel DS240-350DC / Phoenix Contact VAL-SEC-T2-2+0-380DC-FM for the 230V models, and the Citel DS240-220DC / Phoenix Contact VAL-SEC-T2-2+0-220DC for the 120V models. For AC input, acceptable example SPDs are Citel DS41S-230 / Phoenix Contact VAL-MS 230 for the 230V models, and the Citel DS41S-120 or Phoenix Contact VAL-SEC-T2-1S-175-FM
@hectitoelunico9311 Жыл бұрын
Please develop a new version of the app that supports newer android. I can't install this due to it made for old android version.
@phocos-global Жыл бұрын
Thank you for reaching out.We are currently aware of the issue and our technicians are working on a solution.
@phocos-global Жыл бұрын
Thank you for reaching out. A update for the app is In the works.
@hectitoelunico9311 Жыл бұрын
Please make an updated version for newer android (14). I can't install this beacuse it states it was made with older android version.
@phocos-global5 ай бұрын
Thank you for your comment we have passed this along to our tech support
@vraymond108 Жыл бұрын
Very clear explanation. Thank you
@phocos-global Жыл бұрын
Glad it was helpful!
@behemothinferno Жыл бұрын
Is there a setting to change the update interval on the PhocosLink Cloud?
@phocos-global11 ай бұрын
Thank you for reaching out, at the moment PhocoLink Cloud does not have that ability, however it is something we are working on developing for the future.