Rolling Treads

Пікірлер

@KurtWalker-yx3iq Ай бұрын

you went and purchased a quality machine, then purchased a fake aftermarket plastic duckhead. you should buy an actual coats plastic duckhead. they make 2 diff ones. one is black similar but better quality than the aftermarket one. they also make a REAL COATS light grey colored duckhead. the grey one is for aftermarket and nice oem wheels and is the better choice

@rollingtreads8201 3 күн бұрын

The black duckhead I have has not broken since i got it and am still using it so quality is good and i use my tire changer on the daily aftermarket and oem rims. I have the light grey one which is a coats but dont like using it. Thanks for watching.

@JoseCastaneda67190 Ай бұрын

Where did you get the cabinet for the clip on weights and sensors?

@rollingtreads8201 3 күн бұрын

I got that one from wayfair. Thanks for wathing.

@KurtWalker-yx3iq 2 ай бұрын

Great vid showing a great machine. However, the mode you used for that particular wheel is actually incorrect. The outside mode for that application is tape 2. Tape 3 is for older german vehicles that would use a tape weight outside the face of the wheel on the lip. If you notice the white indicator on the mode selector between tape 2 and tape 3 is indicating the wheel face.

@MMMenor 3 ай бұрын

Thanks

@mikeleight6967 6 ай бұрын

I could have done all 4 and the spare in that time... come on cuzzz

@wadewilkerson1868 6 ай бұрын

I tried this and as soon as I plug the rpm wire into the tach it kills the engine it is a different tack as well but it shouldn’t be a problem?

@rollingtreads8201 6 ай бұрын

What year is your Toyota? The electrical setup may be different, but the tack shouldnt matter.

@rollingtreads8201 7 ай бұрын

Ken-Tool - Automotive Wheel Weight Hammer (35361) thanks for watching

@user-jb4fx8bk8s 8 ай бұрын

What is the name of that wheel weight removed that you like?

@kickerpunter8414 10 ай бұрын

Where can I get one of those bead breaking tools. I just got a small sledge hammer & this is what I had in mind but didn't know it until now. I've seen lots of tire changing videos lately & this is by far the easiest I've seen.

@rollingtreads8201 7 ай бұрын

I got the tool from tooltipia.com it was actually the slide bead breaking tool which this piece actually broke off and I have been using it like this since then. But there is a similar tool just like it. Thanks for watching

@rollingtreads8201 7 ай бұрын

Ken-Tool - Economy Bead Breaker (35924), This is the one it broke off from

@rollingtreads8201 7 ай бұрын

And this is the other one you are looking for Ken-Tool T24A Hand Held Bead Breaker . Thanks for watching

@mrhamburger6936 10 ай бұрын

How many times did you rehearse this

@lesklower7281 Жыл бұрын

I am thinking about fitting a tachometer to my 1997 Toyota Hilux as l live in Australia and we are right hand drive and the ignition coil is in the same place as yours l will need longer wires and my fuse box is in the right hand foot well also the dash board doesn't lend it self for fitting a tachometer l will be looking around maybe a small digital tachometer

@rollingtreads8201 Жыл бұрын

nice best of luck with that project. thanks for watching. I'm interested in how your truck set up is on the inside will look it up.

@lesklower7281 Жыл бұрын

@@rollingtreads8201 Well been from Australia its right hand drive and which means were it will be mounted it requires a long piece of wire ll will be pulling the whole dash board out to fit another head unit maybe do it then

@khalil5908 Жыл бұрын

'promosm'

@rubiconklbrutorowman7577 Жыл бұрын

This video can be life saver that you do NOT have to have tire changing machine to put new tires and first time I am seeing this, wow! Well done n thank you!

@rubiconklbrutorowman7577 Жыл бұрын

Very well done to show viewers *written words about VERY important valve core, shared value, and telling viewers about using valve core removal tools, very important also! Just subscribed!

@rollingtreads8201 Жыл бұрын

glad you liked the video. this is how i first learned to change out tires. thanks for subscribing and watching

@LordLoMR2 Жыл бұрын

Tried it with low profile tires? Is it significantly better than the stainless steel one? I’m thinking about upgrading mine.

@rollingtreads8201 Жыл бұрын

ive removed and installed alot of low pro tires, runflats, where i thought the mounting head would break or just not do the job but since the video ive had the same one on and works way better than the steel one. It doesnt damage the rims and doesnt cut into the tire beads.

@spanionneo 6 ай бұрын

I have two ranger tire machines. They both initially came with the plastic duck head. But we've found those to be flimsy when you're prying hard against them when dealing with stiff tires. We have installed the metal duck heads that came boxed with the machines and it's much better than the plastic. Our Ranger metal duck heads do come with plastic inserts that do protect the rim. I thought i share our experience. @@rollingtreads8201

@tylera5010 Жыл бұрын

Great video. You did a great job on covering all aspects..not skipping anything. I loved the text you added also. If you can advise where to buy the tools. Keep up the good work.

@Madrex5 Жыл бұрын

Love the video!

@BenVanAmburg Жыл бұрын

Thank you so much info

@rollingtreads8201 Жыл бұрын

You are so welcome! hope that helped

@eegg6954 Жыл бұрын

Great video. Pay attention or you'll snap those ford mounting bands!

@rollingtreads8201 Жыл бұрын

Thanks, will do!

@infamouz111 2 жыл бұрын

isnt there a better chance of the duckhead slipping off the rim if it has play like that?

@rollingtreads8201 2 жыл бұрын

I've had this set up since the video and have not had it slip off or cause me any problems. The first time I did install it I assumed it didn't need any play tightened up so there wasn't any movement and almost damage tires and mounting head.

@noelhenderson8095 2 жыл бұрын

The only thing I could find you were doing wrong when you were taking the tire off using the tyre lever you don't use the pointy end you use the end with the bend on it you use the pointy end for putting the tire back on especially if you have very low profile tyres I only know this because I did tyre fitting for 20 years as for the cover protector I usually find that they are good to leave on because you do occasionally get that the machine may try to cut the bead but being a new machine it would have to take a while for the duck head to wear but when using that higher lever if you were putting a tube in it you would never use the pointy end to put the tire back on because the chances of you pinching the tube are very likely

@edmundstrauss1204 2 жыл бұрын

Excellent Video! It deserves more than just 68 views as of Jan 2022! At very end, for just three (3) sec of still-frame, he shows details about the high-quality tools: Ken Tool Curved Tire Spoon, and Ken Tool T45 Tire Iron tool, and the Hand-Held Bead Breaker tool. Where to buy those please?

@rollingtreads8201 2 жыл бұрын

thanks, glad you liked the video. I got all those tools from this website called Tooltopia. Have not shopped with them for a while but they were the best deal at the time. The only thing I cheaped out on was the sledge hammer got that one from harbor freight but have used it from construction to tires it has earned my ok