I accidentally bought the white 78 super soft standard cylinder Indy bushings. I like my trucks looser but 78 seems like it’s going to be impossible to work. I’m only 160lbs and 6 feet tall. You guys think I’ll be good?
@saurabhranakoti76212 ай бұрын
Cool tricks
@saurabhranakoti76212 ай бұрын
🎉❤
@knockofftapeundisclosed3 ай бұрын
what kind of trucks are those
@lukegibbs8570 Жыл бұрын
Stomp on bushing to compress bottom skateboard bushing plenty before tightening bushing or else over tight top bushing to achieve tight! The bushing that's near the nut of the kingpin is like just to hold the hanger against the barrel bushing and the hanger when you stand on the skateboard flips the up against the barrel bushing causing pressure on the barrel bushing and the bushing thats against the kingpin nut is also to allow movement of the hanger that presses against the barrel bushing so pressure should be applied first to the barrel bushing by standing on the skateboard and riding the skateboard so the tightness is achieved by compression on the barrel bushing that's caused by standing on the skateboard and then the kingpin nut should not be over tightened and should be tightened slowly after multiple days of riding your skateboard firstly loose so the bushing closer to the kingpin does not first cause compression on the barrel bushing before the hanger because that will over compress your bushing that's closer to the kingpin nut causing unnecessary wear and compression on the bushing closer to your kingpin nut! This means to ensure you have the best tight but well tuned skateboard trucks you must get quality bushings on and skate on your skateboard plenty to cause compression of the barrel bushing via the hanger being stood on when you ride your skateboard whilst the kingpin nut is loose before you move the kingpin nut further tighter to push your other bushing that's close to the kingpin nut towards your deck more or else you may damage your bushing that's closer to the kingpin nut trying to tighten the barrel bushing that just going to then be squashed more anyway.
@999Davie2 жыл бұрын
Did they came two in the box or it was only one . Need to know im thinking about buying them
@bobschsk82 жыл бұрын
you only have to buy one BOx, to have new bushings on both trucks
@eze80243 жыл бұрын
Indy > bones any day 👍
@teodorstoilov90023 жыл бұрын
Hey! A bit late but I just came in Warsaw to study and I'm looking to get back into skateboarding. Can you recommend me some spots and the best skate parks out there? Thanks!
@diddymelone22653 жыл бұрын
as a general rule of thumb: if you prefer your trucks tight and stable, kingpin nut tightened up then go for the barrel/cone combination. if otherwise you like your turns really responsive and your trucks loose, get double cone bushings. the difference is quite stark, for most people, if you are not very experienced yet, I suggest barrel/cone, because loosened up they still turn very nicely and are much easier to tighten up. double cones you have to tighten that nut so hard if you want a tight truck, its not even funny.
@krispyk.17862 жыл бұрын
Bones hard bushings are nice in between- double cone with a pretty solid stiffness to them
@anhiirr Жыл бұрын
i grew up learning most of my flip tricks with stage 9's so i like conicals. I like 92a on the first set of Stage XI ive gotten(mids bc near same height as the stage 9/X). Bc i couldnt ride the cylinder too bouncy at center, and whiffy/pop jiggle when you put pressure on the board to set up for a trick. On my main setup 159 standard stage X, i have a 94a bottom conical 92a top conical its good response/turn. ODDLY the only trucks ive managed to like with a cylinder bottom bushing are the stock ones that come with the ventures. Though i also have bones hards on a second pair of 6.1 ventures as well to cross compare. I like going FAST and turning with my feet while leaving my upper body balanced for tricks/lines in transition/flow. ILL probably have to try the stage 4's and some ace AF1 44 and 60s. Ive also dabbled with hollow axles just to cross compare what kind of setup/skating suits lighter trucks. Definitely depends on the spot and "set up" some tricks that are a lil cutty etc...the hollows help with the ease of pop, though standards are a gold standard ive grown to love esp for airs over lip.
@CoreyVesta3 жыл бұрын
i dont have pools in my city. Really want to skate on it, more better than skating on the flat anyway. Recently came to Poland, warszawa, and quarantine got me back to my country. Missed the chance to try any skateparks. Moreover, im really afraid of people seshing out there, a lot of polish skaters tend to be agressive type of people, or its just my paranoia. Thanks for the video,
@benitofranklyn42373 жыл бұрын
best bushings out there
@whyela193 жыл бұрын
1:49 to skip intro
@fatdydnkn4 жыл бұрын
Czekam na nowy film, pozdrawiam
@SubieShiz4 жыл бұрын
Who doesn’t bring a broom to a spot 🤔
@route.de.zach.4 жыл бұрын
so i got Independent bushings, and they dont even fit on my INDEPENDANT trucks, this is a joke
@JustS0meK1dd4 жыл бұрын
Which bushings did you get (shape/durometer), and which Indy trucks do you have? That's pretty strange because I thought they were all standard size.
@BlueLid14 жыл бұрын
Just bought the same ones he uses in the vid and have the same problem
@JustS0meK1dd4 жыл бұрын
@@BlueLid1 Hmm, I bought the ones in the video too and they were a perfect fit on my Indie Titanium Forged 149s. I did realise that the cup washers are a little bigger than the old trucks I was riding, but didn't think anything of it at the time. When did you buy your trucks? Maybe there have been major design changes if they're pretty old
@route.de.zach.4 жыл бұрын
@@BlueLid1 I had to cut about 2cm off of it and it fit eventually
@berniemackattack863 жыл бұрын
@@JustS0meK1dd I have some independents Koston hollows from like 9 years ago. If I buy these will they not fit ?
@leeshobbyheaven33074 жыл бұрын
That vid was as helpful as a soggy brick
@turbosxl97444 жыл бұрын
i tred bone bushings but I don't like the plastic washers because they warn out quick. But one day I looked for bushings because the bones bushings warned out in a month so I found bushings called independent bushings and it came and I found the bushings amazing the washers are pure metal and go soo straight its lasting me about 4 and a half months and are warned soo nice and it's cheap and not priced a lot so that's why I like independent bushings much better and that would buy independent bushings again from Maxi bother.
@25PJ194 жыл бұрын
Nice shirt guy!
@420sx34 жыл бұрын
Nice bike guy!
@pawellorenz14565 жыл бұрын
VERY, VERY BIG PROGRESS ! CONGRATS ! I have to train more :-). When I saw last obstacle I knew what was going to happen :-)
@floridmonkey27235 жыл бұрын
You've got some sick street spots in your city.
@bobschsk85 жыл бұрын
Thanks that is Warsaw in Poland
@marek93735 жыл бұрын
where is it?
@guccibeng7895 жыл бұрын
Warsaw under the Poniatowski Bridge
@pawellorenz14565 жыл бұрын
Great progress !
@pablolorenzo95245 жыл бұрын
fajny diving na końcu !
@bobschsk85 жыл бұрын
Najlepsze zakonczenie :)
@adrianek6015 жыл бұрын
Bro u was there when spot was already closed. The city told to close that one, but they will make new, near to this place - in this or in next year ; )
@devonteayala5 жыл бұрын
Do you like the independent bushings better than bones bushings?
@turbosxl97444 жыл бұрын
i tred bone bushings but I don't like the plastic washers because they warn out quick. But one day I looked for bushings because the bones bushings warned out in a month so I found bushings called independent bushings and it came and I found the bushings amazing the washers are pure metal and go soo straight its lasting me about 4 and a half months and are warned soo nice and it's cheap and not priced a lot so that's why I like independent bushings much better and that would buy independent bushings again from Maxi bother.
@m0c_productions6 жыл бұрын
You’re getting so good, I remember your videos back from when you lived in Fuerteventura. I haven’t skated much since then but your videos are really inspiring for me to start skating again!
@bobschsk86 жыл бұрын
Thanks for the nice words! Do It! Have FUN!
@BurningKnieClub6 жыл бұрын
😱awesome
@SpencerFitzgeraldProductions6 жыл бұрын
Sick footage man. Keep it up.
@bobschsk86 жыл бұрын
Thanks man!
@instantbless10246 жыл бұрын
better get yourself a conical shape. turns faster
@fivefoot2indianman7164 жыл бұрын
Speed wobbles bucko
@gorryman4 жыл бұрын
Independents come with cylinders to carve nice and slow turning fast is for Thunders let’s keep it that way ,
@gorryman6 ай бұрын
@@Paradox-82- look at your bottom bushing from independent and call it conical I dare you,,, Next
@l.j.i5 ай бұрын
@gorryman they do have both shapes, you egomanaic
@gorryman5 ай бұрын
@@l.j.i they come stock with one cylindrical and on conical bottom to top , as for after market sure , ego maninac? OK Boomer
@bartcasto22406 жыл бұрын
Damn bro you definitely deserve some more subs , editing is pretty straight. Not bad at all. Skating isnt to bad either ,Keep it up homie! Skate till you Die !
@bobschsk86 жыл бұрын
Thanks!
@KeepShredding6 жыл бұрын
What’s Up Man, As A New Subscriber Of Yours, I Like To Start At The Beginning Of A Persons KZbin Journey, So Here I Am. Cute Puppy, It May Take Me A While To Get Caught Up On Your Channel, But I Will. I Also Have A SK8BOARDING Channel Please Feel Free To Check It Out And If You Like Anything Please Feel Free To Subscribe, I Appreciate Every New Subscriber I Can Receive. I Am Just And Older Dude With Heart Disease That Loves SK8BOARDING Pushing To See How Many Smiles I Can Infect The World With, Keep Shredding Bro 😎
@skiaddict14616 жыл бұрын
Nice video!
@badmornings72076 жыл бұрын
Is it normal if my Front Right wheels go up when I’m turning to the left????
@1subnovid1485 жыл бұрын
Bad Mornings ur bushing r too big then
@BurningKnieClub6 жыл бұрын
😎😎😎
@gooddog94706 жыл бұрын
I’ve been learning kickflips for around a month now and my shoes have a hole so big my hand can go through lol 😂
@bobschsk86 жыл бұрын
hahaha thats how it goes :)
@michaelross13396 жыл бұрын
I use Independent Medium Hard cushions on my Sector 9 Out There - 30.5" cruiser. I weigh 122 lbs. I work up from there to Super Hards with the same board, for those higher speed days, but my main cush is the blue 92A's. I use Independent bushings in my 5 minicruisers, and my 36" kicktail. I absolutely love their stuff.
@trillipino36795 жыл бұрын
M.G. Gallagher wait so indy bushing can work with any truck brand cuz their description reads: “Properly sized to fit Independent trucks.” idk if it just for indy or this is just to promote more
@BurningKnieClub6 жыл бұрын
Looks goooood
@m0c_productions6 жыл бұрын
nainn wan wannnn woahhhhh sick skating man, you inspire me to get back on the board one day
@MrGreenrich1826 жыл бұрын
Wtf is wrong with this guy 🤷♂️ congrats!! Nice work
@MrGreenrich1826 жыл бұрын
Nice one!!
@pablolorenzo95246 жыл бұрын
I like double jump @ 1:00 !
@Mysticdsp6 жыл бұрын
First
@Mysticdsp6 жыл бұрын
Hey maxi if I was you I think you should also make top TEN vids... Because sometimes I get tired of vlogs so I want to watch new types of videos and I think that could get you more subs
@bobschsk86 жыл бұрын
Thanks. But im not looking to have more subs or make anything out of youtube. :) its for my family and friends. But mostly for my older self :) Happy to hear that you like them :) Thanks
@Mysticdsp6 жыл бұрын
Hey maxi I'm a new subscriber and I honestly thing you deserve way more subs...Don't let the negetive comments get in your way;-)
@BurningKnieClub6 жыл бұрын
so beautiful!!!
@pawellorenz14566 жыл бұрын
Great job !
@jajacyno6 жыл бұрын
super nice MAX :)
@pawellorenz14566 жыл бұрын
Great job ! NIce welcoming of spring !
@SheSkates9266 жыл бұрын
(: Cool :)
@BurningKnieClub7 жыл бұрын
In 2 wochen flieg ich da hin...mit dem skateboard! Hab schon alle skateparks gespeichert hehe