Stefan Tretau

Пікірлер

@shufflephunk 8 күн бұрын

where do you get the golden and silver knobs

@st-modular 8 күн бұрын

Aliexpress

@shufflephunk 3 күн бұрын

@@st-modular seriously, you are a living legend. not because of this comment but because of all the amazing work you have done for the society! i wish there were BOMs available that you could directly (for the most parts) add in mouser carts oid =)

@machineouverte6947 11 күн бұрын

No need for track names with pattern notation! I really loved the B13, with its kind of rolling bass line

@909lover Ай бұрын

fliest gut... höre es nun zum zweiten mal durch. ich wünsche mir immer eine kleine beschreibeung bei den live videos, welche synth/drum / etc fuer was verwendet wird. klar. tr8s drums, syntakt selbige...usw. auch der faderfox z.b. - ist dein faderfox für Ableton ? (fx)...novation... etc finde sowa immer recht spannend. freu mich s hon auf dein nächstes ;-) hut ab ! chapeau !!

@st-modular Ай бұрын

Danke, der Faderfox ist für den Octatrack und Novation 😉

@a.r.j.i Ай бұрын

L.O.V.E!

@larsgustav.gudbrandsen Ай бұрын

Awesome set! 🔥

@st-modular Ай бұрын

Thanks Lars 😊

@mwmacp Ай бұрын

Very nice 👌 What's the gear in between the Elektron boxes? Some FX processor?

@st-modular Ай бұрын

It's a Faderfox "EC4" Midi-Controller I used to control the OT and Rhythm 👍

@sergioprimavera Ай бұрын

DIE GROSSE KLASSE DANKE, DASS DU DEINE KUNST TEILST STEFAN !!!!

@st-modular Ай бұрын

Danke, gerne 🤗

@yorisdutour6220 Ай бұрын

Hello Stefan I like your sound so much but I'm surprised : I don't see any modular synth in this Live Set. Maybe a few samples of them in your Octatrack?

@st-modular Ай бұрын

Well, for me, modular systems complicate playing live unnecessarily - especially for drums. I've used them in the past for basslines, but I didn't like the fact that patterns can't be recreated. But be assured, 90% of the samples on the Octatrack and Rhythm are produced with my modules. 😉 Thanks for your comment 💯👍

@Sammy-st8iy Ай бұрын

Klasse Live-Jam! Genau sowas möchte im Club hören.

@st-modular Ай бұрын

Danke Sammy 😄

@tapeloopboyz Ай бұрын

Mal morgen auf dem Weg zur Arbeit laut in der Karre geben!

@st-modular Ай бұрын

Laut kommt gut! 😎

@pmeyer6576 Ай бұрын

Butz Butz Butz 🎉🎉🎉 😎👌

@TonydeKaro Ай бұрын

Sexyyyyy 🖤

@profpep Ай бұрын

Late to the party, but I just built this - great addition to the workshop as well as the synth rig. Thank you for a great design, as really useful piece of kit

$@jfracine_composition$

@jfracine_composition Ай бұрын

sounds good !!

@dieAnthropologischeKonstante Ай бұрын

Und leider wieder nur bei pusherman, oder gibt es deutsche Bezugsquellen?

@st-modular Ай бұрын

Leider nicht. Du kannst aber gerne beim Händler deines Vertrauens nachfragen, ob PCBs angeboten werden können.

@dieAnthropologischeKonstante Ай бұрын

@@st-modular wäre halt viel bequemer und würde einem die nasty Zoll Geschichte ersparen;)

@arenreiser3643 Ай бұрын

warum eigentlich nicht in Schneidersladen?

@st-modular Ай бұрын

@@arenreiser3643 Das musst du Schneidersladen fragen. Also gerne dort nachfragen 😉

@GROOVETECHSETS Ай бұрын

2:10 nice techno sequence

@bonesetter Ай бұрын

Looks and sounds sick.

@tapeloopboyz Ай бұрын

Was ein Höllen Jeräääät ?! 😮

@youlemur Ай бұрын

very nice, love the bassdrum groove

@mark35mi 2 ай бұрын

Really enjoyed this sharing of your journey... and look forward to more!

@Hauckelectro_Official 2 ай бұрын

I ❤ it and looking forward for my TROMMELMASCHINE

@user-bt9xf7re9h 3 ай бұрын

Beautiful stuff Stefan! Really enjoyed listening to your immersive Terra explorations. Thanks so much for sharing your work ❤

@wariusgaius 3 ай бұрын

It can’t do a snappy decay envelope, without that big hold stage at the beginning with the level set by the attenuator, can it? I know it’s not in the manual that it can, but I expected it. Not unreasonable imo.

@st-modular 3 ай бұрын

Hey Warius, I´m not sure if I understand your question correctly, but the LVL attenuator needs to be fully open for the envelope to reach its maxium peak voltage, which can create snappy envelopes just like shown in the very first seconds of the video. What specific problem do you have? What would you like to do?

@wariusgaius 3 ай бұрын

@@st-modular Thanks for your reply. I was wrong. When you feed a trigger to the gate input, the envelope is snappy. I would have liked the internal clock to be a trigger and the internal clock generator to give triggers to the envelopes in stead of gates. All for snappiness. Anyway, the module is good value and a great companion for the DFAM. If you think my first comment isn’t appropriate, I’d understand if you remove the thread. Cheers

@st-modular 3 ай бұрын

@@wariusgaius yes, agree, an option for an internal gate to trigger converter is on my to do list for a revision. Let's leave the thread here, it might be also helpful for others 👍

@ericMT 3 ай бұрын

I wish people understood that PT2399 delays do not normally sound this good. This sounds amazing. The 2HP delay is good also but this takes things to the next level.

@stephengreco5115 3 ай бұрын

This is wicked! Filter and env used?

@st-modular 3 ай бұрын

Thanks, no filter (except for the internal eq), envelope for controlling the internal VCA or the individual outputs via external VCAs.

@stephengreco5115 3 ай бұрын

@@st-modular Thanks. Sounds great! I meant which of your envelopes specifically did you use.

@st-modular 3 ай бұрын

@@stephengreco5115 I can't remember exactly, but I've been using YACE a lot lately, so it's probably that envelope.

@BeatnikHimself 3 ай бұрын

This video is incredibly hard to watch and extremely difficult to interpret how the module works from watching. I have read the “manual” and it lacks any technical specifications. My module acting unexpectedly and I cannot find the information here or on your website to troubleshoot the situation.. I am even having a hard time writing this comment because the audio from your video is driving me insane. Please create a different video to show the capability of this device. Edit: it seems the manufacturer changed the information on the website based on my finding, yet has not responded to my emails or commented here. CalSynth has denied this change happened, however I have screencaps from before and after the website was changed. At this , moment you can see one description of the module on ST Modulars website and different information on Modular Grid and CalSynths website. I find this behavior irresponsible, and I hope to warn as many people as I can about this company.

@st-modular 3 ай бұрын

Hey Forrest, I have already explained all this to you in detail by email, but it seems you would like to have a copy of it publicly. Therefore, I am happy to share this here as well: I did indeed make a mistake in the module description. I realized this when answering your questions about the module via email and corrected the information on my website (and informed the shops). I apologize again for this. We have agreed that you can return your module with a full refund. Unfortunately, I cannot reimburse you for the whole system you have built around Cause & Effect, which, as you have described, you can no longer use due to the updated module description. As for the videos, I agree that they are not helpful for everyone, but I don't have the time or money to revise them all at this time. However, for new modules, I do provide more comprehensive videos with descriptions in the subtitles. Thanks, Stefan

@BeatnikHimself 3 ай бұрын

This video is slightly easier to watch than the 3u version, but It is difficult to understand what is happening either of the cause & effect videos you made. However, it seems that in the switch section IN B is passed through to the output when the gate is high. My module is acting in the opposite way, passing IN A through when the gate is high. But this only happens when I have a dummy cable patched to IN B as well. If there is no dummy cable a constant signal is passed through from IN A weather a gate is applied or not. There are multiple other issues I am having with this module that are not explained in the short write up I found online. Please share a link with info on what voltage range are accepted at the inputs, and weather the Read Limit knob is supposed to be bi-polar +/-10v. Is there a way to stop the normalizing/invention from IN A to IN B? I have been able to find absolutely no technical information about this module. It seems the READ IN is expecting a +/- 10v signal? Is this the case? If so is there any way to scale it to 0-5v. Also, the part where IN A is normaled and inverted to IN B is causing me to need a dummy cable every time I use the module. Is there any way to change this behavior? It was not stated in the online documentation that this is how the module works. For clarification, I did not build this module, I purchased it fully built from CalSynth.

@st-modular 3 ай бұрын

Hello Forrest, we have already clarified all these questions with you by e-mail. Thank you, Stefan

@pspiegel85 3 ай бұрын

So ein wahnsinnig tolles Instrument. Jedesmal wenn ich meins auspacke bin ich am Anfang etwas verloren, aber das spielen kommt dann so natürlich und man fließt einfach im Klang ❤

@st-modular 3 ай бұрын

Ja, genau so ist es 😉👍

@samsuffy2505 3 ай бұрын

Hi Stefan, So nice ambiance you created with Terra. I got one since a couple of days. Would you like to tell me the presets name (or n°) you used in the different sketches in the two vidéo. Thanks so much.

@j_abate 3 ай бұрын

Is CV2 routed to resonance? Thanks!

@st-modular 3 ай бұрын

It's a second cutoff frequency input

@mdsmusic1 3 ай бұрын

What's the pan law?

@batchas 3 ай бұрын

Echt toll!

@pmeyer6576 3 ай бұрын

Hammer 😮 seit wann ist der denn am Start ???? ❤

@st-modular 3 ай бұрын

Danke 😊 Seit dem Delly geschrieben hat, dass wir uns in zwei Wochen mit dem Solar 42 treffen. Dafür hats dann aber doch nicht ganz gereicht 😜

@moreausylvain 3 ай бұрын

I know I left a comment somewhere I can't find saying it didn't work much for me... But I'd like to add a meaculpa. I have a situation with lots of added saturation and the take was very noise. I gave it a try to the hum protector and it did a decent job. All is not gone but again there's alot of saturation and it's more a "natural" noise of the trashed tubes i'm using. But this eratic hiss noise is gone.

@Ryannaut_g 3 ай бұрын

Are you on Mau5trap Records?

@st-modular 3 ай бұрын

I'm only releasing on ST Records 😉

@Ryannaut_g 3 ай бұрын

@@st-modular Let's switch it up a little bit. (Jesus is King)

@TMeier 3 ай бұрын

Great sound, nice progression through the whole performance. What sequencer(s) are you using for this?

@st-modular 3 ай бұрын

Thanks for your feedback. I used an Oxi One and a Roland J-6 for sequencing.

@pmeyer6576 3 ай бұрын

@tapeloopboyz 3 ай бұрын

Während die Finger behutsam die Patch-Bucht durchqueren, navigieren sie durch die Klangkorridore und formen Klangfarben, die mit dem Auf und Ab des Universums in Resonanz stehen. Oszillatoren pulsieren mit dem Herzschlag der Schöpfung, während Hüllkurven die Konturen der Emotionen formen. In diesem Bereich wird die Zeit fließend, während sich Sequenzen wie Kapitel einer ewigen Saga entfalten.

@st-modular 3 ай бұрын

Danke mein Bester 😘

@tapeloopboyz 3 ай бұрын

mega ... lass ma ne casi zusammen raus bringen!

@st-modular 3 ай бұрын

Ja gerne, ich sammel schon fleißig musikalische Skizzen 😊

@tapeloopboyz 3 ай бұрын

In the realm where electrons dance amidst a symphony of voltages, there exists a marvel of human ingenuity-the modular synthesizer. Each patch cable weaves a tale of connectivity, a narrative of sonic possibility. Like the strands of fate, they intertwine in a dance of creation, birthing melodies that echo the rhythms of existence itself. Within this labyrinth of knobs and switches lies a reflection of life's complexity, where every twist and turn unveils new harmonies waiting to be discovered.

@st-modular 3 ай бұрын

Thanks ChatGPT 😜

@tapeloopboyz 3 ай бұрын

so isset@@st-modular

@willswitchcraft 3 ай бұрын

perfectly balanced - nuanced, yet with some complexity and loads of interesting ideas/events.............

@cog6492 4 ай бұрын

this is the sickest shit ive ever seen.

@wishbonebrewery 4 ай бұрын

Nice.... a bit of a break from your usual more techno like tunes.

@jochenreich683 4 ай бұрын

Moin stefan.gefällt mir👍👌🎹🎹🎵🎶

@murmurelamusique 4 ай бұрын

very nice 👍 had same title for my tracks a while ago : kzbin.info/www/bejne/ema4ZIiIbp1gsM0si=eh547TcXnrp5ByUf

@universalvibe72 4 ай бұрын

Sweet and dreamy ❤ it

@igormarinkovic9252 4 ай бұрын

give me more PWM

@JagerMagic 4 ай бұрын

I just got this module and just don’t get it.

@st-modular 3 ай бұрын

Hey Jager, if you have any questions, feel free to ask them in the forum at www.st-modular.de.

@ZelikovichMusic 4 ай бұрын

How long does the sample and hold circuit hold the voltage before drooping?

@st-modular 4 ай бұрын

A slow drop is a normal behaviour of most S&H circuits, including the LF398. Increasing the cap value may help reduce it as it discharges more slowly, but I'm afraid a drop is inevitable.

@evryordnryprsn 4 ай бұрын

Super nice and chill

Ең жақсы KZbin

Пікірлер