Hi what’s the hight of this tank and what’s the average cost for materials and labor

Is that a special kind of paint? Or just regular single stage?

It's a shame she didn't upgrade to a newer Energy Kinetics boiler at the same time. Looks like an old design cast iron behemoth in the background.

When installing the Roth tank do you use 2 inch fill pipe and do you install the dip tube. That’s a clean look I think I would use 496 filters so you can see how bad the filters are getting

Do you know if they make a filter with a glass bowl so you can see how much sluge is in the filter

What was wrong with the underground tanks to replace them with above ground ones ?

Completely misleading! Title States installation of a Roth oil tank! There is no video of them installing a Roth oil just a bunch of jamokes cutting up an old tank! Waste more of my time AHs

Asinine! Blatantly

you never mention the downsides of anything it is always this is great way to do tank removal this is great tank old one was bad this one good. nobody does a tank removal like that they made a mess standing tank on end and cutting it that way there is zero chance of their being highly flammable fuel in tank or the oil burner would have blown up you can cut oil tanks with a sawzall while it is horizontal then clean it before moving it. roth tanks swell when filled so you have to leave space around them the plastic caps come loose on top and have to be retightened they fall over easily if empty outside installation is crazy expensive with hood concrete pad anchors to keep it from falling over and oil man needs a ladder to reach fill on top and if he hangs hose off plastic fill while pumping because he cant reach it he can break the plastic connections to steel fill nozzle I like the way your new episodes contradict this one where you show the oil can't explode and they cut it open with a saw

terrible job of pumping out old crap then putting it in new tank what about water ? and bacteria in oil causing it to break down into sludge? why did they tip it on end when sludge is clinging to bottom why not cut sides open and scrape it clean before moving it.

"This is our hazardous waste vacuum" 🤣🤣🤣"well this is certainly not some do it yourself home owner project" 🤣🤣🤣these clowns

nice vidio and subscribe

Ok, I'm having a hard time paying attention to the video b/c the music is great. What song is this???

Where did you get the outdoor containment tub at 00:44 ???

I have no idea what I just watched. 5 minutes of some guy stuffing something in a crack.

What dispensers are those? Is a fuel management system built in?

Over 30 years of bolted steel tanks manufacture experience, Center Enamel has become the bolted steel tanks industry leader in Asia and is certified to ISO9001, NSF61LFGB, BSCI and other international standards. And our bolted steel tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life.

andys extrol tank dillon lambert i did thank king scrapped and not sank

bill and bill rogers cvs last seen dodgers sunapee lodges

He's lying he's just going to dump it down the storage drain

Okay I live in the state of Maine I had one of these tanks installed outside I just found out dep wanted out of my yard have no idea what the hell is going on had an issue with the tank in the first place all plastic pieces on top found out it was a recall because the fuel gauge kept popping off every single time they would fill up the tank the people that installed this put it up on 3/4 and stone Topete off the ground on a cement slab dep inspected this they also built a wall around it made out of pressure-treated board and then filled in 3/4 in stone and put the cement slab on top of this two feet off the ground now dep wants it out of there they said this tank is not supposed to be outside is this true or not it cost $5,000 for that tank they want to put a stainless steel tank outside now what do I do about this problem

5 micron does not remove the bacteria in the old oil which causes the rotting of the tank in the first place. Its also does remove any of the water. Never put old oil into a new tank. you void any warranty on the new tank. either have the home owner run the oil down or recycle it. expect any sludge problems to continue.

What standards are used for the inspection of this type of tank?

Hi, We manufacture grain storage silos (50MT to 10000MT ) and Liquid Storage Tanks 5 KL to 15000 KL with liner ( ETP / STP / DM WATER / RAW WATER / RAIN WATER HARVESTING / SLUDGE HOLDING TANK / FIRE FIGHTING WATER / UNDERGROUND OR BASEMENT WATER STORAGE / DRINKING WATER STORAGE ) ETC , Worked with Dabur , Patanjali , TATA , Good Year / Continental Tyer etc. Regards Yogita +91- 7042021949 [email protected]

a big girls kerchief 7 5

scott missed the meeting marie carbone reading doug brothers leading

What are they taking about that it may cause an explosion? If the oil isn’t hot nothing is going to happen. I cut the open every single day with a sawzall. And oil inside...

kzbin.info/www/bejne/Y2OTiXVsash2edk

german engineered no more weeping oil feared 5

an als oil day good warm feelings felt today dougs own frito lay

Excellent video, spent 15 years in the refineries in California, Nevada and Washington. My Shoulder, Back and Knee gave out over those years, one at a time. I sure miss that job, Union Journeyman. Thanks for the video

My parents bought a tank in 1950. It lasted over 60 years! It was weeping oil over 5 years. The tanks seem alot lighter for the crew handling the job!

Price film

Unfortunately, you cannot hang your pipe from the fire sprinkler piping. That is a violation of NFPA 13 and hopefully was caught by the inspector before this was finaled; that is if the fire inspector was involved with this process. Usually a plumbing inspector wouldn't have the slightest idea unless they also understand fire sprinkler piping and bracing requirements.

kzbin.info/www/bejne/ppyqc2uceLF3b7M

Not an animation.

I like the tank tub by oil storage solutions www.tanktub.com

Appreciate Video! Excuse me for butting in, I would love your opinion. Have you ever tried - Proutklarton Protecting Aqua Plan (Sure I saw it on Google)? It is a good one of a kind product for getting prepared for a mega drought without the hard work. Ive heard some great things about it and my mate after a lifetime of fighting got great success with it.

My God, what a nightmare! I had an underground oil tank in my home when I purchased it in 1985. A couple years later, they ran a natural gas line through my neighborhood, and I was able to switch over. Got rid of the tank and eliminated the possibility of a environmental disaster. Been very happy with gas. It's cleaner, quieter, and much cheaper.

Just did one at my summer place in ME but it was a PITA. Had to transfer the oil into the new tank, pull the old tank out, transfer the oil back into the into the old tank, move the new tank into place and then transfer the oil back into the new tank (getting tired just thinking about it). Fortunately had less than a 1/4 tank when I did this. Stood the old tank on end and cut it into 3 sections with a sawzall. Took the last section (with the sludge in it) into the back yard and set it on fire to burn it off and then all 3 sections to the dump.

No soil cleanup required? That’s a major bit of luck.

Cost of tank 100000 litre please

So i assume you guys are alittle more expensive than a $1000 new oil tank?

Clean this spill in 1 hr to perfection with Oil Solutions. www.cleaningupoil.com

Oil Solutions, Cleans/Removes oil, oil stains, oil odor, oil sheen kzbin.info/www/bejne/f6mvpIGrgKuai9k animation demo kzbin.info/www/bejne/r5LHeGycd8iaqcU on asphalt kzbin.info/www/bejne/anTFnp2ldrGWmpo DEMO kzbin.info/www/bejne/o4HVlaWZat2mfNU on water

Roth tanks are the biggest peace of craps

That’s awesome. Is fuel oil still a big thing in your state? Here in WI, it’s diminishing. Almost everyone has or is in the process of converting to natural gas/propane.

Are y'all hiring ?

this only cost $100,000 plus OT

Nice video I'm currently designing for a diesel UST to day tank to genset.