BB

Пікірлер

@TheKatimation 5 ай бұрын

First time ever happened to me and was genuinely confused that my emblem was gone to find this out wtf is wrong with people

@bb8215 5 ай бұрын

I know! I thought maybe it came off in the car wash.

@TheKatimation 5 ай бұрын

@@bb8215 Funny enough, I did get a car wash before I noticed it was gone. It could've been either that or the other. Either way, it is still upsetting having to replace it :c this tutorial is helpful to want to replace it on a budget!

@jeffreyshelton7273 6 ай бұрын

I just replaced this for my elderly mother. Some vandals scraped off the H on the emblem. God knows why. This video and the resultant injuries is spot on. Wear long-sleeves to protect yourself or take off the grille and bumper. My first thought was just to find a Hyundai "H" sticker and plop it on. The emblem is connected by three plastic tabs and two screws. Hers did not have any electronics in it - just an expensive hunk of plastic.

@1312motorsport 7 ай бұрын

good idea with these bands

@paulking8055 7 ай бұрын

I have a jeep, being an american car it has let me down a few times. My TR6 on the other hand, never has.

@mikezupancic2182 8 ай бұрын

No, they didn't try to pry, it just fell off. I was at the dealer and they were checking my oil. When they dropped the hood, the plastic part on the front just fell off onto the ground. It's only held on by a small amount of glue. (then I accidentally ran it over at home when I left it on the hood and moved my car)

@Ryzard 2 ай бұрын

No, they absolutely try to pry them off. Some variants of this car have sensors in the front that people try to steal. I can tell because mine had direct scraping around it.

@mikezupancic2182 2 ай бұрын

@@Ryzard if you say so. I've literally seen them fall right off before my eyes. But you pretend people want to steal your shiz

@emilefouquet9005 9 ай бұрын

Worthless Video. It is correct to state the cause of a No Start is either Fuel or Ignition. However the average person does not have the Diagnostic Ability or Repair Expertise. These types of videos assume the viewer is at least a 'B' Tech and carries an extra Fuel Pump, Fuel Filter, Carburetor, Ignition Coil, Distributor Condenser, or Ignition Switch. Make sure you also carry the necessary tools !

@bb8215 9 ай бұрын

That's the whole idea of the video. To show people that almost anyone can diagnose and fix these cars. They are very simple. A little bit of research will tell them the basic tools they need to do the basic repairs. The problem with these cars, because they are relatively unreliable compared to new cars, is that people spend a small fortune paying a mechanic to do the most basic repairs. There's nothing wrong with teaching someone how to save money by doing the work themselves. Carry a few spares and some basic tools and you can save yourself a lot of cash and hassle. No one is born a 'B' tech as you say. It is learned. Everybody has to start somewhere 👍

@emilefouquet9005 9 ай бұрын

@@bb8215 They are not unreliable relative to their average use. You failed to respond to the question of which Tools and Spares are you going to carry ? As a TR-6 owner and ex Automotive Instructor you are out of touch with reality. The logistics of Diagnosing and Repairing your junk in the shoulder of a highway or some country road is absurd. Perhaps you should give a real example of either yourself or someone else that did what you're suggesting.

@bb8215 8 ай бұрын

@@emilefouquet9005 Apparently you failed to watch the entire video. If you watch the whole video, you would see at the end I show what's in the trunk, the tools and the spares I carry. As far as tools go, I just have a small bag full of typical tools. Sockets, ratchets, open end box wrenches, pliers screwdrivers. You know the basic stuff. Everything is SAE. Nothing is metric on these cars. I can give you plenty of examples where I fix the car on the side of the road. Why do you say it's absurd? Because you're not able to do it? And if you are, why would you prefer to call a tow truck? Because of the spares and tools I carry in the trunk, I was able to diagnose and fix a problem on the side of the road three times In the last 3 years and get home without having to call a tow truck. If you call that absurd, then I really don't know how I can possibly reason with you. And, I didn't say that they were unreliable relative to their average use, as you say. I said they are unreliable relative to new cars. If your TR6 is as reliable as a new car, then you are very lucky man! Join a forum or Facebook page dedicated to TR6s and you will find hundreds of posts regarding regular problems with these cars. If you are a mechanic and are knowledgeable about these cars, then do like I do. Join a forum or Facebook page and help people instead of criticizing them. As an "ex-automotive instructor" as you say you are, you should understand the value in teaching people how to repair their cars. 👍

@lordleonusa 10 ай бұрын

I notice that you are not using the correct fuel hose clamps, please change them. Also, if you haven't already done it, please make sure that all your fuel hoses are Gates Barticade 30R14 for carbs which will not degrade with the ethanol in fuel. Keep an eye on the diaphragm in any mechanical fuel pump you might be using because if they fail due to ethanol, they can allow fuel to enter the engine!

@bb8215 10 ай бұрын

Correct fuel hose clamp? Do you mean fuel injection hose clamp?

@zekehanscom5869 10 ай бұрын

The spark should jump to any ground. Valve cover, etc. Isn't the reason for your clear fuel filter to see the fuel flowing?

@bb8215 8 ай бұрын

Yes, I have two clear filters. One before the fuel pump and one before the carburetors. The reason why I mention how to pump the fuel into a jar is that some people do not have a clear filter and are unable to see quickly if they are getting fuel or not.

@zekehanscom5869 8 ай бұрын

@@bb8215 Just saying that glass is dangerous.

@bb8215 8 ай бұрын

@@zekehanscom5869 potentially, yes they can be dangerous. But I've been using them for decades without any problem. As long as you mount them safely where they won't break then they shouldn't be a problem. I really don't like the metal ones that you can't see through. I had one disintegrate and send filter particles all through my fuel system. Total mess.

@coldsiemens121 11 ай бұрын

cant we just take it with screwdriver? From the front of the car??

@bb8215 11 ай бұрын

No, it has to be from inside

@bshnabel 11 ай бұрын

Very nice car

@bb8215 11 ай бұрын

Thanks

@slosher42 11 ай бұрын

Thanks that was my first bike brought back some fond memories .

@cheftush Жыл бұрын

Good video.

@bb8215 Жыл бұрын

Thank you!

@oldguyrc6983 Жыл бұрын

Sir I'd like to see a video on that whole car it looks sharp what year is it thank you for making the video there's a lot of people out there that don't understand these cars are easy to keep going thank you

@bobbooth4196 Жыл бұрын

Thank you. It's nothing fancy but mechanically it's pretty good.

@bikerstan9052 Жыл бұрын

Had mines “stolen” guess they thought it had sensors. Thanks for your quick video/guide on how to remove this. Saved me time

@lookylook570 2 жыл бұрын

They may have been fast, but these things were junk.

@Rhyno186 2 жыл бұрын

Yeah, it's a weird design. The clear lens on the front of the badge popped off, and the actual emblem is just made of a kind of foil that shreds immediately when the lens comes off. I'm just going to have my son 3D print something to replace the Hyundai logo.

@SRClippedit 2 жыл бұрын

Heyy guys so thanks to this video I got to change mine so shout out to you dude. But my emblem was screwed in the inside and then you unclick the emblem always checks if it’s screw from the inside I almost took my whole bumper grille off ! Lol!!! Thanks again buddy

@brucegruben140 2 жыл бұрын

I found a replacement on eBay for about 60. Dealer wanted 156. Call the dealer with the vin # and he’ll give you the exact part number.

@ricardok5593 2 жыл бұрын

I got one at eBay also. $90 for express delivery.

@brucegruben140 2 жыл бұрын

@@ricardok5593 it sucks we got losers out there doing this.

@juliaricherson8220 2 жыл бұрын

We just noticed ours missing when we went thru the card wash. We thought maybe the pressure of the car wash might have been the reason? We are hoping to find a replacement. Does anyone have a good source for emblem replacements?

@speedshiftr88 Жыл бұрын

Got mine from Ebay...$62 with taxes

@yesitisdakid4903 2 жыл бұрын

I had one of those my friend had a Honda CT70 and I smoked him couldn't figure out why as this is a 50

@SomFilipinoGuy 2 жыл бұрын

i didn’t realize that this was a common thing amongst hyundai owners. i had my emblem stolen/broken while i was at work

@Merrittlover2024 5 ай бұрын

Same smh

@mathius_aoc8604 2 жыл бұрын

Mine looks the same as yours did before, some scumbag tried to steal mine too. I'm setting up a camera cause my car gets robbed(or attempted robbery) or vandalized way too often. I'm going to try replacing the broken one today, wish me luck, thanks for the advice!

@taharaad5241 2 жыл бұрын

Very helpful thank you, same thing happened to my car.

@jorgenvonstrangle000 3 жыл бұрын

I think my moms fell off or got super dirty so I was confused and even she didn’t noticed. I’ll get it replaced for her

@a.k.henderson4543 3 жыл бұрын

I have that exact one. Where did you get a replacement from?

@bb8215 2 жыл бұрын

I found it on eBay

@latanyadean7146 3 жыл бұрын

Where were you able to purchase the emblem from? I'm having a difficult time finding a proper part.

@bb8215 2 жыл бұрын

I found it on eBay

@davidaniszko1101 3 жыл бұрын

Do not underestimate the use of a stubby phillips screwdriver. If doing this in warm weather a pair of pliers can also release the clips. I have smaller arms and still scraped them up. I should have listened about the long sleeves. Thank you for posting this alternative fix. The new emblem looks great.

@bb8215 3 жыл бұрын

Sorry I didn't record while I was doing it. I didn't really think of it truthfully. But I couldn't find any other good videos on how to do this. This may not be the correct or the best way to do it but it works for me. Make sure you wear a long sleeve shirt or some type of protection to keep from cutting up your arm while you are removing the screws from the back of the emblem.

@seekthetruth824 3 жыл бұрын

YOU still got the maverick? is it for sale? thanks

@chopandsniff420 4 жыл бұрын

how fast can it go

@raccoon681 3 жыл бұрын

i had one im not sure but it's basicly as fast as a ct 70

@chopandsniff420 3 жыл бұрын

@@raccoon681 8 months dude

@raccoon681 3 жыл бұрын

@@chopandsniff420 welcome to youtube you can get reply's years later

Ең жақсы KZbin

Пікірлер