Wouldn't it be nice if manufacturers would make shelves that did not break. I get disgusted every time I have to fix the cheap junky appliance parts. You did a very good job on this.

The gears because of centrifugal force and high speed stays dry all the time. I personally clean all old grease and add a huge amount, run grinder couple of times and open it again and the gears was again dry. Not sure what is a solution but I used blue grease than is thicker and more resistant to heat then the original one which was brown color.

You can use a can opener on this and open its on youtube.

If rhe batteries are drained, the ups wont turn on?

Seriously? The most important part was how to pry it open and you skip on it entirely?

this microcontroller actually supports max 1g flash chips or 2 512mbit chips if chips are soldered on both sid3 of the pcb

great video, but that's not a Orbital Sander, that's a palm sander.

Sound fault sound nahi aa rahi hai

You should have shown how you was “readistributing “ the grease

🤘😎 kzbin.info/www/bejne/bpK4ppZrmt2back

Shame these things aren't really repairable.

If you haven't personally filled the gearbox of your angle grinder, then it has very little grease in it .This is only for the manufacturer to save money . Every grinder Ive owned -whether it was made in Germany or China or Korea or anywhere, no matter how much I paid for it, didn't have enough grease in it.....Fill the gearbox

I scavenge 18650's from recycle bins, mostly found in old laptops and power bricks to both refresh these old battery packs, and create new ones. Most times, I''ll find there's only one or two truly bad batteries in a laptop pack, with the rest testing good.

Hi! How to turn the mixer around (so that handle is on the left side) and that handle is not turned around - pointing up?

Cant you just use a normal iron/steel nail?

Where did you get those 4 pcs of plastic or what did you use

Desculpe por escrever em português: meu sogro comprou várias baterias dessa marca quando viajou ao Estados Unidos, com suposta garantia de não vazar e ser uma verão ainda melhor. Resultado? Mais da metade delas vazou e ele perdeu quase tudo. Essas baterias não são projetadas para serem armazenadas fora de ambiente climatizado 24h por dia, ou países frios (primeiro mundo)... eu moro no Brasil

How did you get the triangular screw to open?

Shit video quality. Why did you even bother uploading??

What a waste of of time can't hear you you keep you don't even show the full details what you're doing you are freaking clueless dude you should not be doing this p wasn't a good mood so I saw this f******😊 piece of shit piss poor excuse of a video

The 94V-0 is a specification for PCB circuit board and has nothing to do with voltage range of the LED. It is a UL standard. You can search the net for more info on it.

Thanks for this video.....is it possible i can use pvc or bottle caps?

Hard to understand him.

If there are 5 cells, how would you connect the 4 terminals to the 2 ends and 4 junctions? The two end terminals are marked + and - and have the heavy wires. If the 4 junctions between the 5 batteries connect to the remaining two connectors with the little wires, the little wires can't carry significant current, and there's not enough terminals to match the 4 inter-battery junctions.

What a useless video. Stop wasting people's time and take down the video.

I just fixed mine (for now) by putting in thin cardboard where the top contacts.

your english sucks

Your words are unintelligible and under annunciated. Like you don't speak loud enough, in the direction of the mic, an in a way that other english speaker can follow. Hoping i couldlearn something new this was not that video.

Interesting

This is the best tear down video ever. Thanks!

Relay horn switch replace and when ignition on, horn stays on

Don't tell me nothing 😔😭😔

Really interesting indeed, my friend. 😊 Looks like they made a partial naked relay there. Anyway, stay safe there with your family! 🖖😊

I love George

Thanks took mine out without damaging it 😅

Hola quería saber por qué tengo problema con mi UPS

Clearly you’re mistaken, as these have “Duralock Power Preserve” technology and simply cannot leak. Lol😂

what was the problem? what was the fix?

Can I have your contact number please...I need my b14 horn to fix

Where you located?

I have a 2012 Sentra, and when we press on the middle, the horn doesn't sound; only if we press on the left and right side. Could it be a similar issue?

I just use an older perculator that can boil water.

If you desolder the wires and flip the board over there are surface mount resistors and components that make it work

Interesting exploratory trip through the Keurig K575? (the exact model is not disclosed) components, but it is near useless for accomplishing what the video description says -- to increase the temperature of coffee it makes. The video has several missed opportunities to help someone who's competent but unfamiliar with the innards of the device, which was ostensibly the reason for the video. For example you state that removing the cover was quite challenging but fail to disclose how you overcame that challenge without breaking the plastic so that viewers might take advantage of your experience. The video *never* explains how to achieve the goal in the description. In addition, there are several unconfirmed guesses at what some components are (the fusable link) which you sometimes later explain, yet its unclear how knowing that is related to the stated purpose of the video -- "fooling the machine to increase the temperature of the coffee it outputs."

Love the accent And that too talking about tools

single battery dimensions Please ?

Thank you for your video! I have successfully modified my K-Mini Plus using your method and it finally produces hot coffee. For those interested... The K-Mini Plus thermistor has a pair of white wires going into the board on a socket marked NTC. Separate a small section of this dual conductor cable into its 2 seperate insulated wires. Cut one of the wires and splice in a quarter watt 1.2K resistor. This means leaving one of the wires intact from board to thermistor and the other with a resistor in line. Insulate it well using heat shrink tubing or electrical tape. Close up the machine and enjoy hotter coffee!

Noob🤢

You broke it, but I can hardly tell because the shot is to far out.

Sir i burned pvc transparent glue and accidentally inhalled some smoke from it. I am worried when i search on Internet that it is very toxic substance. Can you please explain me is it really that toxic and what should i do?