9 сағат бұрын
16 сағат бұрын
21 сағат бұрын
21 күн бұрын
21 күн бұрын
Пікірлер
@reesewagster2634 8 сағат бұрын
I’m having issues with not being able to power off the vehicle without turning off the remote and sometimes I even have to unplug the battery to shut off the car. I’m running an xr10 pro hobbywing. Any idea what may cause that?
@WTFRCCars 8 сағат бұрын
There definitely something set up wrong, if you try to power off the transmitter 1st you should get a warning saying power off receiver 1st, but there's is nothing that the transmitter or receiver does that would be able to stop you powering off the RC/esc so I'd check the firmware on the esc and check the wiring make.sure you don't have any cut cables or anything
@reesewagster2634 8 сағат бұрын
@@WTFRCCars okay sounds good. I’ll check it out and let you know. Thank you!
@reesewagster2634 7 сағат бұрын
@@WTFRCCars I had to go into my esc and change the controller off parameter to get it to turn off without remote having to be turned off 😎 thank you!!
@WTFRCCars 7 сағат бұрын
@reesewagster2634 the one where you hold brake to power off ?
@MultiAp101 Күн бұрын
They need to release the assistant app in the Apple APP Store
@WTFRCCars Күн бұрын
Apple won't allow the connection over usb :(
@MultiAp101 19 сағат бұрын
@@WTFRCCars unfortunately I don’t own a computer and have never needed it. You’d think in this day and age they’d incorporate WiFi into transmitters for updates. Then if you had a receiver that needed an update you just plug it into the transmitter. Spectrum transmitters have this capability.
@WTFRCCars 19 сағат бұрын
@MultiAp101 The only spektrum tx that has WiFi updates is the ones that run android os and there really not great to use :(
@MultiAp101 19 сағат бұрын
@@WTFRCCars I’ve never used one but I think it’s something they should incorporate in the future. An all in one said and done transmitter
@xuanhoangpham5673 Күн бұрын
can you provide diagram plz?
@WTFRCCars Күн бұрын
What part are you struggling with ?
@xuanhoangpham5673 Күн бұрын
@@WTFRCCars Can i use voltage regulator instead of Ubec? if yes? How should I wire them? If no, i'll need to get ubec and need the diagram to follow! I am learning. Thank you
@WTFRCCars Күн бұрын
@xuanhoangpham5673 I wouldn't use a voltage regulator it would probably cause interference ubec have filters
@xuanhoangpham5673 7 сағат бұрын
@@WTFRCCars I C! However, I am building thruster for my kayak which only require thrust and turning so I dont think it would cause any problem?
@WTFRCCars 7 сағат бұрын
If your using a transmitter it can cause issues but also interference for servos is not good it can make them jump around
@TDHobbies Күн бұрын
I just got this radio and it's good to see someone do the update before I do it and possibly miss a step here and there
@WTFRCCars 4 сағат бұрын
Yeh sometimes it's just nice to see it done 1st
@johnnytruong2141 2 күн бұрын
I can’t bind my ttx300 transmitter and receiver tr325 to my Kraton 6s at all I wish you were here to help me 😭😭😭😭 having so much problems and it’s a brand new and the reciever light won’t even turn on anymore 🤦🏾♂️🤦🏾♂️
@WTFRCCars 2 күн бұрын
I'm guessing if the receiver won't light up then it's either not getting power from the esc or the plug is connected the wrong way round from the esc
@musaedalqattan8976 2 күн бұрын
Thanks
@WTFRCCars 2 күн бұрын
No worries
@JohnStenborg 2 күн бұрын
…when flysky nb 4 pro get edgetx support…yes…there is something in the works there!!!…i will buy it immediately…for now im with radiomaster mt12…of course…(but waiting eagerly for companion support)…completely open programming…open source development…multi protocol of course…(actually flysky rx in all cars for the moment!!!)…radio protocol module possibility…faster longer and more stable radio link…cheaper…large friendly creative community…check it out!!!…
@MrMikeAlright 3 күн бұрын
I know it’s 2 years later but….. how can I open the app, I register but get no code sent to my phone 😢
@WTFRCCars Күн бұрын
Hi so for the phone number you have to use international dialing code so UK a mo Ile with 09878765272 would be +449878765273 and use PNMWAX as the invitation code then request the code when you receive the txt add the password and the txt code then full in your details on the next screen you should be good to go
@gaizkafg 3 күн бұрын
Gracias! I have this exact same kit waiting for me to set up in a tamiya, so this video is quite helpful.
@WTFRCCars 3 күн бұрын
Glad ya liked it
@marcoguerra5124 3 күн бұрын
So I tried up dating the radio but it totally updated. But how long does it take .
@jamesmelocco465 4 күн бұрын
I've learnt a new word today, "daisy-chainable", and not from pornhub BTW. How am I going to explain that one to the wife.
@WTFRCCars 4 күн бұрын
Good luck ;)
@TDHobbies 4 күн бұрын
4 years later and I just ordered a new radio to go about doing all this here... this is helpful, and the switchover should go just fine.
@WTFRCCars 4 күн бұрын
Glad ya found it useful :)
@joshuaybanez4700 6 күн бұрын
In servo frequency what im ganna put in a throttle? My car is electric not a nitro
@WTFRCCars 6 күн бұрын
Depends on what esc you have, most esc's can run at 333hz but more expensive esc's can run higher frequency
@nathancunningham8717 6 күн бұрын
Man wish they would do that with Max8 G2S
@WTFRCCars 6 күн бұрын
Yep hobbywing need to add this to more esc's
@frankposterello1628 6 күн бұрын
Any tricks to have this work for the rear in 4ws mode? I really like the look and scale realism the slowed steering gives but didn't see way to affect the rear steer.
@WTFRCCars 6 күн бұрын
Set it on the channel that is running the rear steer
@arthurscott8583 6 күн бұрын
Just got myself a Flysky G7P (actually an Absima CR7P which is the same apparently) Seems like a great transmitter but not easy to master, and without your videos here I would be totally lost trying to make sense of navigating the menus so a huge thank you from me. (subscribed and liked)
@WTFRCCars 6 күн бұрын
Thanks for the sub and glad ya like the vid :)
@mk1baz72 7 күн бұрын
craig is the a vid or can you do a vid on setting pro plus throttle to 70/30 i’d like to try this on my mojave 6s but i’m having trouble cheers
@WTFRCCars 7 күн бұрын
You can't change the physical throttle movement so there's no point doing it :)
@mk1baz72 7 күн бұрын
@@WTFRCCars yeah i was wondering i got it to work but had no reverse on my tamiya top force evo was just a trial lol
@WTFRCCars 6 күн бұрын
@mk1baz72 if it's the tamiya esc ya will need to calibrate it
@mk1baz72 6 күн бұрын
@@WTFRCCars oh no mate i ditched all that shoved in a max10 brushless
@WTFRCCars 6 күн бұрын
Max 10 needs calibration doing definitely, I run the max10sct in my slash ultimate
@kevinmiller6005 7 күн бұрын
Is your Gyro Upside Down?
@WTFRCCars 7 күн бұрын
No it's the way it shows in the instructions
@wayne5376 7 күн бұрын
Great video !! Thankyou I just got this setup and after 4 trips to hobby store got it going lol. They dont tell you you need a programmer or battery adapters lol. Bad day great video thankyou sir!
@WTFRCCars 7 күн бұрын
Unfortunately a lot of the shop staff don't know much these days about anything they sell :( glad the vid helped though :)
@rcautoball 8 күн бұрын
Omg. Lol. That's a pretty important step to leave out of the manual. Just tested it out on my Thrustmaster T300RS steering wheel and pedals and it works perfectly! Thanks for getting this figured out, brother!
@WTFRCCars 8 күн бұрын
No worries happy to help :)
@fcal6758 8 күн бұрын
Noticed you're not using any loc-tite on your metal parts. Do they advise against it?
@WTFRCCars 8 күн бұрын
Didn't advise using any and tbh nothing has come loose and it's had a good number of hours use so far
@fcal6758 8 күн бұрын
@@WTFRCCars OK, I'll probably use some anyway
@travelrideandfly8355 8 күн бұрын
Where do you connect the telemetry sensors on this receiver?
@WTFRCCars 8 күн бұрын
On the posts labeled NPA to NPD
@travelrideandfly8355 8 күн бұрын
@@WTFRCCars Thx !
@MrBoomtheroom 8 күн бұрын
your link doesn't allow shipping to my country , do you know a contact email i get get hold of someone from the manufacturer to send direct?
@WTFRCCars 8 күн бұрын
The link is for the manufacturers own site
@MrBoomtheroom 8 күн бұрын
Didi you do a follow up video as stated in this video?
@WTFRCCars 8 күн бұрын
Yeh did a vid running with them in my yokomo MD 2.0 drive RC and they work fantastic in that and will also be testing them in my D2 Evo 2wd with a 5.5t brushless set up
@MrBoomtheroom 8 күн бұрын
why is the high voltage one cheaper than the standard?
@WTFRCCars 8 күн бұрын
Just depends on the demand for em really and how many of each they make
@gabrielemerenda6470 8 күн бұрын
Hey friend i have a tnx 5.2 for 80€ its good add to my collection? Its a nice model?
@WTFRCCars 8 күн бұрын
Yeh it's a nice one to have
@simplymentalOG 9 күн бұрын
cough ! Be nice if they expanded on recognition with other devices...🙄 😂😂😂 Thanks for the heads up Craig 👋😄
@WTFRCCars 9 күн бұрын
Tbh I think it should work with a good few devices as the pad I'm using is not on the list exactly as it's an elite pad not a stock Xbox one pad
@simplymentalOG 9 күн бұрын
@@WTFRCCars I double checked my older xbox, u know, just incase, nope lol. At times like this, looking after stuff becomes mute, would have replaced with newer models if constantly broke stuff 🙃 and wouldn't be around to tempt me to try time and time again 😆 Too old, 😱🥺😭😤 Feels like us vintage pieces are getting replaced, objects either alive or not 😂 Can't say much, just bought a t-shirt with nes controller bent over a zimmer frame. Says it all 🤣
@WTFRCCars 9 күн бұрын
@simplymentalOG love it lol
@rcinhand9671 9 күн бұрын
Nice. If I get the plus pro, at least I'll know it. Too bad they forgot to include it in the manual
@WTFRCCars 9 күн бұрын
Yeh was thinking how the hell does it work
@MsRomanFed 10 күн бұрын
dont buy rocket rc. Their quality is awful. People complain they burn on the first run. I have few, one of them changes settings randomly (sometimes on-the-go), the second lost its sensor connector and it looks like it was not well soldered.
@WTFRCCars 8 күн бұрын
Surpass are actually the OEM for a good few other manufacturers including hobbywing, their new v6 motors are right up there with some of the best around and are re branded for many other brands so not sure where you are getting your info from ?
@MsRomanFed 8 күн бұрын
@@WTFRCCars I own many of their products. Motors are good, ESCs are all bad. Yesterday we soldered a newly arrived one.
@khalid-7653 10 күн бұрын
Hi sir .. yesterday I ask mip him self if you have diffs gears for my tamiya frog he replied we dont they are really useless... anyway thanks for your video it's much needful and I will purchase the part on your video to my tamiya because I want to change the motor to brushless
@WTFRCCars 10 күн бұрын
Yeh the stock diff just doesn't hold up well at all the mip diff is far better
@khalid-7653 10 күн бұрын
Thanks for your reply and for your great video @@WTFRCCars
@DoRC 10 күн бұрын
Does this only work with the Pro or will it work with the regular plus as well?
@WTFRCCars 10 күн бұрын
Just the pro and pro +
@DoRC 10 күн бұрын
@@WTFRCCars hmm. That might be a tough expenditure to justify.
@rcautoball 11 күн бұрын
Thanks for making this, man! I'm partially relieved because now I know it's not just my transmitter. The battery base was what I suspected as well, being that I have every device Flysky lists as supported (except for the Thrustmaster pilot controller) and they all work on my Pro, but not any on the Pro+. I really hope this gets a fix because I really wanna get several of these working for my Rocket League in real life events and for FPV racing with the steering wheel setup!
@WTFRCCars 11 күн бұрын
New vid coming soon with fix :)
@rcautoball 11 күн бұрын
@@WTFRCCars I have to wait for the fix?! 😭😂 Appreciate the work, man!
@WTFRCCars 11 күн бұрын
@rcautoball you won't be waiting long ;)
@BoontedStuff 11 күн бұрын
Figures. I ran into an issue trying to get my Pro+ recognised by my PC when updating it the very first time (assistant works fine though - just update/dfu mode) and had to pop the old base on. That being said, I've managed to get my PS4 controller working on my Pro+ twice out of 50 attempts. I still don't know how I got it working as there wasn't any pattern.
@WTFRCCars 11 күн бұрын
Definitely looks to be an issue with the pro + base so far
@Huntbk5 11 күн бұрын
This is masterpiece 👏 bravo .for less then 100$ and 25$reciver and pretty much does what 400$ or 500$ does .why not . Ppl don't release that to fly 400$ plain u don't need spectrum or futaba.
@WTFRCCars 11 күн бұрын
Yep it's a really good tx and so many options too
@sic_ario 11 күн бұрын
It's a bad remote. Or I got a broken one. 90 hours of flying in simulators and it broke: YAW started pulling to the left, setting dead zones didn't help, calibration didn't save it. I even took it apart - to no avail. The deviation from the zero point is 32%! That's terrible. Good thing the store agreed to accept the remote control and refund the money - I ordered Radiomaster Pocket.
@WTFRCCars 11 күн бұрын
Strange one I have still works fine but guess any from any brand can go faulty
@herbieRCpaints53 11 күн бұрын
Cool lighting kit mate , it looked good Friday night 👍👍
@WTFRCCars 11 күн бұрын
Not gay at all pmsl
@MARKLINMAN1 12 күн бұрын
Been trying tp update and the SERVER is CONSTANTLY DOWN! All it does is SPIN "Connecting to server" Rubbish!
@WTFRCCars 11 күн бұрын
The server is always up so it's likely your antivirus or you isp that is blocking the connection
@nathancunningham8717 12 күн бұрын
My home screens channel name will change if I use a name from the list but if I try to name it myself like FAN it doesn't changed and just says CH4?
@WTFRCCars 12 күн бұрын
Yes that's how it works it will only change if you use a predefined name
@nathancunningham8717 12 күн бұрын
@WTFRCCars ok thanks. I just wasted 30mins messing with it trying to get it to change!
@ΜακηςΚαλκανας 13 күн бұрын
Hello can you help me how to setup fs gpd01 to fly sky i6.thank you
@WTFRCCars 13 күн бұрын
Hi I don't have that radio unfortunately but it is listed as compatible you will need to have one of the ports on the receiver set to ibus for the sensors to work if that helps
@saschafellner6029 14 күн бұрын
Hallo, funktioniert das auch mit 2 Lipos? Vielen Dank 👍
@WTFRCCars 11 күн бұрын
Yes it will work fine with 2s lipos
@nathancunningham8717 15 күн бұрын
Do you have to have Max8 plugged into RX to set settings or can it be done with just lipos
@WTFRCCars 15 күн бұрын
Not sure never tried it on its own
@nathancunningham8717 14 күн бұрын
@@WTFRCCars I was gonna take Max8 to work to mess with on lunch break but didn't want to take buggy with me.
@WTFRCCars 14 күн бұрын
@nathancunningham8717 worth a try
@nathancunningham8717 14 күн бұрын
@WTFRCCars yea I'm take 2 lipos with me. Shouldn't do anything weird like burn the esc would it?
@WTFRCCars 14 күн бұрын
@nathancunningham8717 no won't do any damage
@darweez 15 күн бұрын
Can you program the paddle switch on the plus to adjust the brake d/r? My pro + can do it while the pro cannot. I'm looking to get the + for my son.
@WTFRCCars 9 күн бұрын
All of the radios nb4 to the new pro + can do this just set the paddle buttons to combined C then select brake dr :)
@velocityinstereo 15 күн бұрын
That's a neat build.
@WTFRCCars 15 күн бұрын
Yeh it works really good on carpet tracks too
@philipvick9513 16 күн бұрын
Hi WTF RC, I have the INR4GYB receiver. Can you use the CTM01 temp sensor on 1 channel say NPB and then have an IBUS2 GPS sensor on NPA. On my nb4 pro+ if I set NPB port on ibus in so the temp sensor works it won't allow me to select ibus2 on NPA. Same happens vice versa, if I have NPA set to ibus2 so the GPS works it will only allow Ibus2 on NPB and not ibus-in. It won't allow both sensors to work at the same time. Any insight??
@WTFRCCars 16 күн бұрын
From memory you can only use 1 protocol at a time so ibus or ibus 2
@DirtyDriveAway 14 күн бұрын
@WTFRCCars thought so as it wasn't allowing me to choose different protocols for each channel. Thanks for your time, love the vids, really helped me setup my system.
@e3s-rc 16 күн бұрын
Thanks for sharing!
@WTFRCCars 11 күн бұрын
Glad ya like it :)
@BAYRAKTAR_MAN 16 күн бұрын
WHAT ABOUT SPEED
@WTFRCCars 16 күн бұрын
It's on the side of the servo 0.09 @8.4v
@BAYRAKTAR_MAN 16 күн бұрын
@@WTFRCCars the torque is too so why are we testing it for ourselves then?
@WTFRCCars 16 күн бұрын
@BAYRAKTAR_MAN because many of the servo meets the advertised speed but not the torque advertised
@BAYRAKTAR_MAN 16 күн бұрын
@@WTFRCCars you know I saw a test of some reefs servo testing as like .03 or .04 seconds slower than advertised
@BAYRAKTAR_MAN 16 күн бұрын
@@WTFRCCars as a 1/8 buggy guy, speed is just as important as torque for me. Those larger 4wd vehicles often have a tendency to not want to turn once moving under power. Having the torque to fight the momentum of the wheels and vehicle and the speed to flick the car makes a huge difference.
@El_Twin 17 күн бұрын
Thank you so much for this content. Just the right information I needed. 🙏
@WTFRCCars 16 күн бұрын
Glad ya found it helpful :)
@MRKool524 17 күн бұрын
does noble 4+ have the same display as the pro? more information as the pro. i use ibus 2 gps sensor with noble 4 but it cant record the data. so i want to upgrade to monitor accel or top speed. does the nb4+ has this ability?
@WTFRCCars 17 күн бұрын
Nb4+ does data recording but does not have the same display readout as the pro and pro +
@claybrown1619 18 күн бұрын
AWESOME VIDEO BROTHER AND THAT IS ABSOLUTELY COOL MAN GOD BLESS 🙏✝️🙏 SINCERELY CLAY B.
@WTFRCCars 18 күн бұрын
Glad ya like it :)
@philhull29 18 күн бұрын
can it control a normal winch or only if you use a servo for a winch. say like a TRAXXAS winch
@WTFRCCars 18 күн бұрын
It can do any type of winch one with a controller or just a servo type
@philhull29 18 күн бұрын
@@WTFRCCarsthanks bud. I’m new to the controller and trying to figure it all out.
@philhull29 17 күн бұрын
@@WTFRCCarsdo you think you could do a video of connecting a winch to it ? And not a servo one it’d be greatly a appreciated
@WTFRCCars 17 күн бұрын
@philhull29 if I ever get a winch I'll do one but no plans to get a winch at this time