I took my clutch apart and found the step bolts that hold the weights were worn, I replaced the bolts-sanded the face of the weights smooth and made sure the spacers were in beside the weights, when I reassembled. Sounds were almost totally gone on a worn clutch.

Roulement libres du variateur qui est grippé j'ai déjà eu sa

Remove the assy check for any moving parts that are broken or have extreme play

I thought the same shit hahaha

this happened to me when I installed new clutch. There is a one-way bearing behind the primery clutch and when this bearing is damaged this sound occures. And also the bearing has to be installed of course in the correct direction. (first time I somehow succeded to install it wrong). After I turned the one-way bearing in the correct direction everything turned perfect. The first sign of damaged one-way bearing is that the clutch runs all the time even without throttle. Normally when everything works well when the throttle is not pushed then the clutch shouldnt rotate.

bearing or bushing, check the belt, on the bottom side it might have a broken peace flapping around

Mine makes a clicking noise when you start driving and it’s right underneath the seat idk what it is

So what was the problem?? Mine us doing the same making that noise

Does it go into drive

que medida debe ser la banda q lleba ?

Old Ward Canyon Road - Buckland Ridge Trail

Not Farmington Canyon - Bountiful - Skyline Drive

Had the same issue. Removed clutch. Started the mule back up,noise gone. Replaced with new clutch,the noise came back. Took the vehicle to the dealership,45 minutes later it was solved. They replaced a defective spark plug wire. Now I have a spare clutch.

WhTs the ticking noise have same noise plz tell me

Little red plastic Shims are bad. Or white

Did you ever figure out the problem? Mine does the same thing please help!! Thanks.

The clutch weights are stuck so it won't disengage lol

She’s clapped

Older video but hopefully you might respond, when does the gates open for the summer and do they open at all during winter? Thanks!

Mine does this and I’ve put 3 brand new clutches on any suggestions

here is a fix kzbin.info/www/bejne/e4SUqXWXZ9d4p7s

Lo mismo le pasa a un rzr 800 que tengo 👌

Does yours flip over or come off ever

These clutches really need to be rebuilt like every 800 miles or so. And I know 800 miles doesn't sound like a lot but it really is on an ATV. Especially if you have swamped it and you've ever gotten water or mud in the clutch. My sportsman 570 has about 400 mi on it and I have sucked muddy water in my CVT and my clutch is getting rebuilt before it even causes an issue.

Mine has a loud squeal. Don't know if its the clutch tho. Sure not the band cuz i changed it

My polaris 425 magnum takes of when I start if in drive or reverse. Will run fine in neutral. Put in gear takes off. Clutch bad?

Neat scenery mate👊.

Thats a Great Video 👌 Big Like ❤️ Subscribe your Chanel ✌️I flight Drone too 🍻

Ooooooh this footage is amazinggg 😍😍😍 such a beautiful place!

Gonna have much larger problems when that loose bolt (top left) falls inside the clutch

This is why I sold my polaris and bought a Honda.honda doesn't use a belt drive golf cart system.

did you solve it and what was the problem ?

Would this make your rzr to shot off every time you put in gear???

Wow. That is impressive! Fitting music selection. Well done 👏

Awesome shots Dave! Super cool!

Looks sweet! Found this Video because I am actually going to take my gravel bike there today and just doing some re-con. Ill post a video of my ride!

Insane

very smooth flight well done

I noticed you had comments turned off on Ogden Canyon. However random nice little video it was.

Yessah my clutch was making the same noise today, thought the belt ripped but when I was limping it home, a loud bang came from the belt case and it rolled to a stop, revs up fine tho just won’t move

the problem is its a polaris cluch

Take face of the clutch and take out spring and do not but spring back in and put back on the face and then should rub

What did you edit this with email me your answer like in my KZbin bio

No really what was the problem I'm very curious

The clutch is like a Arctic cat, I would guess that it is stripped and or cracked spider .

Check for lint in pirmary clutch from rodents. Clutch isn't coming all the way out to disingage the belt.

Sounds like a ticking time bomb. Buy a shorter belt as it's always engaged on the clutch shaft.

I would highly recommend removing that dangling screw in the upper right .......your clutch sounds shot, you certainly don't need a screw dropped and launched. Could really hurt someone...

Son los pesos de balance

do people take jeeps up there? or is it mostly a quad/bike trail?