How do I purchase this sensor

1:42 Powerpak1212-8s temp seems to be 67.6 not 62.6.(@1W)

Kiarra Squares

Breno, good job.

kkk nano é bue goofy

Could you link to a datasheet ?

Excellent information. The IL300 Optocoupler works very well for an isolated amplifier. 😎 Thanks.

Excellent components for the mobility of the present and the future...

تم

Interesting insight into the electric mobility market...

Where can i find therm

How are you addressing the sensors? Are you multiplexing the SDA line? They all have the same address, right? Or can the address be programmed? Looking at this for a large array and would like some guidance on implementation.

I worked at there facility for a few months in Warwick Rhode Island on all the military silicone nano tech chip sets making me a Maritime exception since unwed mother of there maiden voyages of there most elite not yet disclosed vessels

What is the high current handling low-cost n-channel MOSFET (low RDS) most compatible with this (assume 48V application)? because lot of MOSFET's Vth is around >10V and this driver photovoltaic maximum output voltage is 8V.

impossible to source, stick to hcnr200... actually available.

Nice 👍

Hello, how can you get a sample of this board ?

NANO É O CURSO DO FUTURO

Hanzhen harmonic drive gear , strain wave gear reducer, robot joint , over 30 years experience .

Hanzhen harmonic drive gear , strain wave gear reducer, robot joint , over 30 years experience .

This is extremely instructive! Is the LTSpice simulation available?

Metal foil resistor. es.wikipedia.org/wiki/Resistencia_de_l%C3%A1mina_met%C3%A1lica Index 1 History of foil resistor 2 Study and development of sheet metal resistance. 3 Effect of physical variables that influence electrical behavior in metals and alloys 3.1 Temperature coefficient of resistance 3.2 Operation of the metal foil resistor 3.3 Forms of construction of metal foil resistors 3.4 Manufacture of metal foil resistors 4 Component design 5 Cleaning and degreasing of the metal sheet. 6 Nickel-chromium alloy heat treatment, Evanohm S. 7 Photolithography process 7.1 Etching by electrolytic or chemical processes (etching) 8 Soldering the copper terminal to the metal sheet. 9 Processes 10 Smith, precision resistor

Metal foil resistor. es.wikipedia.org/wiki/Resistencia_de_l%C3%A1mina_met%C3%A1lica Index 1 History of foil resistor 2 Study and development of sheet metal resistance. 3 Effect of physical variables that influence electrical behavior in metals and alloys 3.1 Temperature coefficient of resistance 3.2 Operation of the metal foil resistor 3.3 Forms of construction of metal foil resistors 3.4 Manufacture of metal foil resistors 4 Component design 5 Cleaning and degreasing of the metal sheet. 6 Nickel-chromium alloy heat treatment, Evanohm S. 7 Photolithography process 7.1 Etching by electrolytic or chemical processes (etching) 8 Soldering the copper terminal to the metal sheet. 9 Processes 10 Smith, precision resistor

Metal foil resistor. es.wikipedia.org/wiki/Resistencia_de_l%C3%A1mina_met%C3%A1lica Index 1 History of foil resistor 2 Study and development of sheet metal resistance. 3 Effect of physical variables that influence electrical behavior in metals and alloys 3.1 Temperature coefficient of resistance 3.2 Operation of the metal foil resistor 3.3 Forms of construction of metal foil resistors 3.4 Manufacture of metal foil resistors 4 Component design 5 Cleaning and degreasing of the metal sheet. 6 Nickel-chromium alloy heat treatment, Evanohm S. 7 Photolithography process 7.1 Etching by electrolytic or chemical processes (etching) 8 Soldering the copper terminal to the metal sheet. 9 Processes 10 Smith, precision resistor

Hi.. How to buy this sensor?

Huh. No mention of the Niagara Falls, NY facility? What about Malvern, PA?

Can you please share metal film resistor how could we estimate power rating of residence without data sheets just with physical of components

what is the max current rating of 2020CD package inductors?

Ich würde lieber zu Electronicon gehen.

Informative. Thank you very much.

Im doing job in vishay

Electronic technology is so revolutionary, and I am so proud to be a student of electronics and communication (EC) 😉

Thank-you for the video

1-Metal Foil Resistors, Link to a document. Topics on metal foil resistors, theory and practice, with the corresponding bibliography. Charly GarcíaJuly 15, 2022 Metal Foil Resistors , kzbin.info/www/bejne/m4PWZ3qAiaapgK8 2-Theory on the manufacture of the metal foil resistor, first part. 1 This video sequentially describes the first part of the metal foil resistor manufacturing process, each image is accompanied by its corresponding bibliography, which the reader can consult more extensively. , kzbin.info/www/bejne/h4HId6hrmdpqjZo 3-Thermal treatment of the metal foil, to adjust the temperature. Temperature Cofficient of Resistance 1. Evanohm Thermal treatment of the metal foil, to adjust the temperature coefficient of temperature TCR. coefficient of temperature TCR, kzbin.info/www/bejne/fnW9cqBorKahqM0 4-Metal Foil Resistors page, with the theory and practice and its corresponding bibliography. telegra.ph/Metal-Foil-Resistors-09-29, Metal Foil Resistors Index Manipulation of the TCR in metals. 1 telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 5-Metal Foil Resistors, Metal Foil Resistors 3.kzbin.info/www/bejne/nH6bg5dubrtjZ8U In order to modify the properties of the TCR, it is necessary to use an oven with special characteristics such as those described in this video, for more information read "Heat Treatment Principles and Techniques ,Ashok Sharma, C. P. Sharma, and T. V. Rajan. 6-metal foil resistors, kzbin.info/www/bejne/m4PWZ3qAiaapgK8 10 views Aug 30, 2022 Topics on metal foil resistors, theory and practice, with the corresponding bibliography. 7-Manipulation of the TCR in metals. 1.telegra.ph/Manipulation-of-the-TCR-in-metals1-10-03 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.kzbin.info/www/bejne/laG5fGmcfauKiZI 9- Manipulation of the TCR in metals. 2 .The second part describes in more detail the processes and equipment used. Manipulation of the TCR in metals. 2 .The second part describes in more detail the processes and equipment used. telegra.ph/Manipulation-of-the-TCR-in-metals2-09-29

1-Metal Foil Resistors, Link to a document. Topics on metal foil resistors, theory and practice, with the corresponding bibliography. Charly GarcíaJuly 15, 2022 Metal Foil Resistors , kzbin.info/www/bejne/m4PWZ3qAiaapgK8 2-Theory on the manufacture of the metal foil resistor, first part. 1 This video sequentially describes the first part of the metal foil resistor manufacturing process, each image is accompanied by its corresponding bibliography, which the reader can consult more extensively. , kzbin.info/www/bejne/h4HId6hrmdpqjZo 3-Thermal treatment of the metal foil, to adjust the temperature. Temperature Cofficient of Resistance 1. Evanohm Thermal treatment of the metal foil, to adjust the temperature coefficient of temperature TCR. coefficient of temperature TCR, kzbin.info/www/bejne/fnW9cqBorKahqM0 4-Metal Foil Resistors page, with the theory and practice and its corresponding bibliography. telegra.ph/Metal-Foil-Resistors-09-29, Metal Foil Resistors Index Manipulation of the TCR in metals. 1 telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 5-Metal Foil Resistors, Metal Foil Resistors 3.kzbin.info/www/bejne/nH6bg5dubrtjZ8U In order to modify the properties of the TCR, it is necessary to use an oven with special characteristics such as those described in this video, for more information read "Heat Treatment Principles and Techniques ,Ashok Sharma, C. P. Sharma, and T. V. Rajan. 6-metal foil resistors, kzbin.info/www/bejne/m4PWZ3qAiaapgK8 10 views Aug 30, 2022 Topics on metal foil resistors, theory and practice, with the corresponding bibliography. 7-Manipulation of the TCR in metals. 1. telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.kzbin.info/www/bejne/laG5fGmcfauKiZI 9- Manipulation of the TCR in metals. 2 .The second part describes in more detail the processes and equipment used. Manipulation of the TCR in metals. 2 .The second part describes in more detail the processes and equipment used. telegra.ph/Manipulation-of-the-TCR-in-metals2-09-29

Metal Foil Resistors. This component can withstand extreme temperature variations and makes it optimal for aerospace applications. The video is an introduction to the manufacturing process of the same. Metal Foil Resistors, theory and practice, component to be used in aviation applications and space systems. 1-Metal Foil Resistors, Link to a document. Topics on metal foil resistors, theory and practice, with the corresponding bibliography. Charly GarcíaJuly 15, 2022 Metal Foil Resistors , kzbin.info/www/bejne/m4PWZ3qAiaapgK8 2-Theory on the manufacture of the metal foil resistor, first part. 1 This video sequentially describes the first part of the metal foil resistor manufacturing process, each image is accompanied by its corresponding bibliography, which the reader can consult more extensively. , kzbin.info/www/bejne/h4HId6hrmdpqjZo 3-Thermal treatment of the metal foil, to adjust the temperature. Temperature Cofficient of Resistance 1. Evanohm Thermal treatment of the metal foil, to adjust the temperature coefficient of temperature TCR. coefficient of temperature TCR, kzbin.info/www/bejne/fnW9cqBorKahqM0 4-Metal Foil Resistors page, with the theory and practice and its corresponding bibliography. telegra.ph/Metal-Foil-Resistors-1-07-15, Metal Foil Resistors Index Manipulation of the TCR in metals. 1 telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 5-Metal Foil Resistors, Metal Foil Resistors 3.kzbin.info/www/bejne/nH6bg5dubrtjZ8U In order to modify the properties of the TCR, it is necessary to use an oven with special characteristics such as those described in this video, for more information read "Heat Treatment Principles and Techniques ,Ashok Sharma, C. P. Sharma, and T. V. Rajan. 6-metal foil resistors, kzbin.info/www/bejne/m4PWZ3qAiaapgK8 10 views Aug 30, 2022 Topics on metal foil resistors, theory and practice, with the corresponding bibliography. 7-Manipulation of the TCR in metals. 1. telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.kzbin.info/www/bejne/laG5fGmcfauKiZI 9- Manipulation of the TCR in metals. 2 .The second part describes in more detail the processes and equipment used. Manipulation of the TCR in metals. 2 .The second part describes in more detail the processes and equipment used. telegra.ph/Manipulation-of-the-TCR-in-metals2-09-29

Metal Foil Resistors. This component can withstand extreme temperature variations and makes it optimal for aerospace applications. The video is an introduction to the manufacturing process of the same. Metal Foil Resistors, theory and practice, component to be used in aviation applications and space systems. 2-Theory on the manufacture of the metal foil resistor, first part. 1 This video sequentially describes the first part of the metal foil resistor manufacturing process, each image is accompanied by its corresponding bibliography, which the reader can consult more extensively. , kzbin.info/www/bejne/h4HId6hrmdpqjZo 3-Thermal treatment of the metal foil, to adjust the temperature. Temperature Cofficient of Resistance 1. Evanohm Thermal treatment of the metal foil, to adjust the temperature coefficient of temperature TCR. coefficient of temperature TCR, kzbin.info/www/bejne/fnW9cqBorKahqM0 4-Metal Foil Resistors page, with the theory and practice and its corresponding bibliography. telegra.ph/Metal-Foil-Resistors-1-07-15, Metal Foil Resistors Index Manipulation of the TCR in metals. 1 telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 5-Metal Foil Resistors, Metal Foil Resistors 3.kzbin.info/www/bejne/nH6bg5dubrtjZ8U In order to modify the properties of the TCR, it is necessary to use an oven with special characteristics such as those described in this video, for more information read "Heat Treatment Principles and Techniques ,Ashok Sharma, C. P. Sharma, and T. V. Rajan. 6-metal foil resistors, kzbin.info/www/bejne/m4PWZ3qAiaapgK8 10 views Aug 30, 2022 Topics on metal foil resistors, theory and practice, with the corresponding bibliography. 7-Manipulation of the TCR in metals. 1. telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.kzbin.info/www/bejne/laG5fGmcfauKiZI

Metal Foil Resistors. This component can withstand extreme temperature variations and makes it optimal for aerospace applications. The video is an introduction to the manufacturing process of the same. Metal Foil Resistors, theory and practice, component to be used in aviation applications and space systems. 1-Metal Foil Resistors, Link to a document. Topics on metal foil resistors, theory and practice, with the corresponding bibliography. Charly GarcíaJuly 15, 2022 Metal Foil Resistors , kzbin.info/www/bejne/m4PWZ3qAiaapgK8 2-Theory on the manufacture of the metal foil resistor, first part. 1 This video sequentially describes the first part of the metal foil resistor manufacturing process, each image is accompanied by its corresponding bibliography, which the reader can consult more extensively. , kzbin.info/www/bejne/h4HId6hrmdpqjZo 3-Thermal treatment of the metal foil, to adjust the temperature. Temperature Cofficient of Resistance 1. Evanohm Thermal treatment of the metal foil, to adjust the temperature coefficient of temperature TCR. coefficient of temperature TCR, kzbin.info/www/bejne/fnW9cqBorKahqM0 4-Metal Foil Resistors page, with the theory and practice and its corresponding bibliography. telegra.ph/Metal-Foil-Resistors-1-07-15, Metal Foil Resistors Index Manipulation of the TCR in metals. 1 telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 5-Metal Foil Resistors, Metal Foil Resistors 3.kzbin.info/www/bejne/nH6bg5dubrtjZ8U In order to modify the properties of the TCR, it is necessary to use an oven with special characteristics such as those described in this video, for more information read "Heat Treatment Principles and Techniques ,Ashok Sharma, C. P. Sharma, and T. V. Rajan. 6-metal foil resistors, kzbin.info/www/bejne/m4PWZ3qAiaapgK8 10 views Aug 30, 2022 Topics on metal foil resistors, theory and practice, with the corresponding bibliography. 7-Manipulation of the TCR in metals. 1. telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.kzbin.info/www/bejne/laG5fGmcfauKiZI

8- Metal Foil Resistors . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.kzbin.info/www/bejne/laG5fGmcfauKiZI

8- Metal Foil Resistors . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.kzbin.info/www/bejne/laG5fGmcfauKiZI

8- Metal Foil Resistors . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.kzbin.info/www/bejne/laG5fGmcfauKiZI

@Rancho

8- Metal Foil Resistors . kzbin.info/www/bejne/laG5fGmcfauKiZI Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.

7-Manipulation of the TCR in metals. 1. telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . kzbin.info/www/bejne/laG5fGmcfauKiZI . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.

7-Manipulation of the TCR in metals. 1. telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . kzbin.info/www/bejne/laG5fGmcfauKiZI . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.

Metal Foil Resistors, theory and practice, component to be used in aviation applications and space systems. 1-Metal Foil Resistors, Link to a document. Topics on metal foil resistors, theory and practice, with the corresponding bibliography. Charly GarcíaJuly 15, 2022 Metal Foil Resistors , kzbin.info/www/bejne/m4PWZ3qAiaapgK8 2-Theory on the manufacture of the metal foil resistor, first part. 1 This video sequentially describes the first part of the metal foil resistor manufacturing process, each image is accompanied by its corresponding bibliography, which the reader can consult more extensively. , kzbin.info/www/bejne/h4HId6hrmdpqjZo 3-Thermal treatment of the metal foil, to adjust the temperature. Temperature Cofficient of Resistance 1. Evanohm Thermal treatment of the metal foil, to adjust the temperature coefficient of temperature TCR. coefficient of temperature TCR, kzbin.info/www/bejne/fnW9cqBorKahqM0 4-Metal Foil Resistors page, with the theory and practice and its corresponding bibliography. telegra.ph/Metal-Foil-Resistors-1-07-15, Metal Foil Resistors Index Manipulation of the TCR in metals. 1 telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 5-Metal Foil Resistors, Metal Foil Resistors 3.kzbin.info/www/bejne/nH6bg5dubrtjZ8U In order to modify the properties of the TCR, it is necessary to use an oven with special characteristics such as those described in this video, for more information read "Heat Treatment Principles and Techniques ,Ashok Sharma, C. P. Sharma, and T. V. Rajan. 6-metal foil resistors, kzbin.info/www/bejne/m4PWZ3qAiaapgK8 10 views Aug 30, 2022 Topics on metal foil resistors, theory and practice, with the corresponding bibliography. 7-Manipulation of the TCR in metals. 1. telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . kzbin.info/www/bejne/laG5fGmcfauKiZI . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.

Metal Foil Resistors, theory and practice, component to be used in aviation applications and space systems. 1-Metal Foil Resistors, Link to a document. Topics on metal foil resistors, theory and practice, with the corresponding bibliography. Charly GarcíaJuly 15, 2022 Metal Foil Resistors , kzbin.info/www/bejne/m4PWZ3qAiaapgK8 2-Theory on the manufacture of the metal foil resistor, first part. 1 This video sequentially describes the first part of the metal foil resistor manufacturing process, each image is accompanied by its corresponding bibliography, which the reader can consult more extensively. , kzbin.info/www/bejne/h4HId6hrmdpqjZo 3-Thermal treatment of the metal foil, to adjust the temperature. Temperature Cofficient of Resistance 1. Evanohm Thermal treatment of the metal foil, to adjust the temperature coefficient of temperature TCR. coefficient of temperature TCR, kzbin.info/www/bejne/fnW9cqBorKahqM0 4-Metal Foil Resistors page, with the theory and practice and its corresponding bibliography. telegra.ph/Metal-Foil-Resistors-1-07-15, Metal Foil Resistors Index Manipulation of the TCR in metals. 1 telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 5-Metal Foil Resistors, Metal Foil Resistors 3.kzbin.info/www/bejne/nH6bg5dubrtjZ8U In order to modify the properties of the TCR, it is necessary to use an oven with special characteristics such as those described in this video, for more information read "Heat Treatment Principles and Techniques ,Ashok Sharma, C. P. Sharma, and T. V. Rajan. 6-metal foil resistors, kzbin.info/www/bejne/m4PWZ3qAiaapgK8 10 views Aug 30, 2022 Topics on metal foil resistors, theory and practice, with the corresponding bibliography. 7-Manipulation of the TCR in metals. 1. telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . kzbin.info/www/bejne/laG5fGmcfauKiZI . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.

8- Metal Foil Resistors . kzbin.info/www/bejne/laG5fGmcfauKiZI . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.

8- Metal Foil Resistors . kzbin.info/www/bejne/laG5fGmcfauKiZI . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.

Metal Foil Resistors, theory and practice, component to be used in aviation applications and space systems. 1-Metal Foil Resistors, Link to a document. Topics on metal foil resistors, theory and practice, with the corresponding bibliography. Charly GarcíaJuly 15, 2022 Metal Foil Resistors , kzbin.info/www/bejne/m4PWZ3qAiaapgK8 2-Theory on the manufacture of the metal foil resistor, first part. 1 This video sequentially describes the first part of the metal foil resistor manufacturing process, each image is accompanied by its corresponding bibliography, which the reader can consult more extensively. , kzbin.info/www/bejne/h4HId6hrmdpqjZo 3-Thermal treatment of the metal foil, to adjust the temperature. Temperature Cofficient of Resistance 1. Evanohm Thermal treatment of the metal foil, to adjust the temperature coefficient of temperature TCR. coefficient of temperature TCR, kzbin.info/www/bejne/fnW9cqBorKahqM0 4-Metal Foil Resistors page, with the theory and practice and its corresponding bibliography. telegra.ph/Metal-Foil-Resistors-1-07-15, Metal Foil Resistors Index Manipulation of the TCR in metals. 1 telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 5-Metal Foil Resistors, Metal Foil Resistors 3.kzbin.info/www/bejne/nH6bg5dubrtjZ8U In order to modify the properties of the TCR, it is necessary to use an oven with special characteristics such as those described in this video, for more information read "Heat Treatment Principles and Techniques ,Ashok Sharma, C. P. Sharma, and T. V. Rajan. 6-metal foil resistors, kzbin.info/www/bejne/m4PWZ3qAiaapgK8 10 views Aug 30, 2022 Topics on metal foil resistors, theory and practice, with the corresponding bibliography. 7-Manipulation of the TCR in metals. 1. telegra.ph/Manipulation-of-the-TCR-in-metals-09-08 .The adjustment of the TCR to compensate for resistance variations due to thermal effects is carried out by heat treatment of the metal foil. The nickel-chromium alloy, called Evanohm S, (see Hamilton Evanohm S), can have its TCR adjusted, in the range of about 100 to -20 [ppm/°C], during the manufacturing stage, by heat treatment. in the temperature range of 400°C, resulting in a graph like the one shown below, resulting from a 2-hour heat treatment. 8- Metal Foil Resistors . kzbin.info/www/bejne/laG5fGmcfauKiZI . Sep 15, 2022 Thermal treatment TCR. 1 ,This movie describes the first part of the metal foil treatment.