Link for starter ?

WRONG WAY of doing a simple job. Just remove the battery and insert the belt from that end. then you don't need to remove the transfer pully

Why wasn't the deck cleaned?

thank you

Thanks for the upload, my lt1045 decided to start leaking at the end of the season last year so this is my project before spring.

Thanks for the video! Recently got a 50 inch max and was trying to figure out when the time comes how to replace the belt the easiest way. Really make’s sense how you did it and not needing to remove springs and pulley brackets etc. I liked the Toro deck belt system since ‘08 with my Z4200 but has a different design than the 50 inch max.

Wheel horse. That's a tractor that will last. Great lil plow and garden tractor. Add some wheel weights and they push some decent snow.

Where did you get it from?

Thank you so much!!!

Breather pipe not on. Good video. Duns,Scotland.

Good job it worked out great for me thanks so much

hey mate love the work 👍what tires are you running on the rear?

Thank you - as a new widow trying to take care of our huge property I sure needed some tips! I know nothing of this type of thing.

Thanks good video. I took my rear body off and blew all the crap out too.

Looks like a brand new mower. My trans. Pulley and dtive belts had to be replaced at 220 hours. Very bad design.

Having a sonic cleaner is great but spraying it off is the first thing I do 😊

I just never liked this style of hood or rear tank Hard to work on 😢😢😢

Trying to take the bolt out but it just keeps turning the belt. How do I keep it from doing that?

What is the model# for this tiller?

If the deck runs you did good

Ur a complete idiot .

It was smoking ALOT!!! so thats why i cleaned the filter and changed the oil and the smoke was a white smoke so i thought it was burning oil cause the filter was covered in oil....

I have 1 of these and i cleaned the air filter and changed the oil and it still wont start i checked the spark plug and it was dirty and its not even 6 months old.... I did however mow my field and alot of it was dead so it just blew dust up in yhe air .... Not sure what to do besides take the nut off the carburetor and and clean it.... I do know that when i changed the oil gas was dripping out the primer button so not sure if i flooded the carburetor or what....

Thank you this was a life saver and I need all the help I can get 😮

Thanks. I was wondering if I was gonna have to jack up the mower to change the belt but it looks easier than I was figuring

Great video, thank you!🇺🇸👍🏻

Thanks! Didn't realize bead sealer was even a thing!

Thanks for your help and instructions well done

What caused the smoke before and after you cranked it?

That is the Purdue flight training school. They fly over every week here.

I don't imagine there are too many of those old mowers around, a real antique! Thanks for the carb cleaning tutorial. I've never done a cleaning before but have to with the price of an OEM carbs.

I just picked up one of these for free today. Do you know if anyone makes rebuild kits for that old carb or if there are aftermarket carbs available?

I've got an LT2000 in my shop with the opposite problem. It'll move, but once it starts going, it won't stop. I suspect the belt is wrong. It's too tight to the point where the tensioner can't relax the belt enough to stop it from turning

Offf...ok here we go. I'm going to try and do this in my yard with the deck still on.

Where do you order the chain from?

Podrías poner el número de banda la que es para que camine la que va al cigüeñal de favor me sirvió mucho tu video

I took bolts out around 2019 and starters were around $263 I’m just now getting around to putting it back together and I guess now the part is around $45. But the bolts WILL NOT GO BACK IN! Cleaned the holes used hydraulic fluid then stripped the bolt. Geez! Such a simple repair gone wrong. Thanks for sharing this!

Great video it helped me replace the belt on my new to me mower. They only thing I'll add is that I was able to replace the belt without completely separating the deck from the tractor. Overall great job and thank you.

You never showed how to put the belt back on

This is the only video I could find that didn't assume the viewer knew what he was doing. Thank you so much for explaining it so it was easy to understand. I think I can do this.

Chingon !!!I thank you

Thats very incredible 😝🥤🕺

A commonly overlooked issue: when reinstalling the flywheel cover assembly, pay close attention to how the heat shielding hooks into it. Missing one can/will result in a damaged cooling fan. Don’t ask me how I know.

Great video. Step by step and super easy to understand. Although I'm stuck trying to get that 18mm bolt out of the axle. I tried heat, an impact and brute force and nothing is breaking that thing free!

Do you have any idea how to change the spark plug? Thx

I was just wondering if you could let us know where you order the connectors from, please

Excellent video, especially like your creative ingenuity that saves a lot of time and frustration.

Based on this video, I think I'll take a stab at it. I was going to call a service to come out but you made it seem humanly possible. Thanks. The armpit hair shot was kinda funny, btw.🤭 UPDATE: I faced it and did it. It was a lot more logical and straightforward than I though it would be. Added, I had to replace one of the intermediary pulley wheels. No biggie. And, no mosquito bites. Thanks, again.

Lifesaver. Your video is so clear, precise, articulate and visually excellent (except for a little bit when you are pulling out the carbie and your shoulder is in the way). You don’t waffle on with unnecessary commentary. It’s not easy to get everything right but you have managed it. Anyway I’ve got mine out and the only question is, what are you spraying into the holes in the carbie?

@scootersworld8537 Been trying to find a gas tank but even using the model number I haven’t found the right one