I'm glad to hear that! If you have any questions, reach out to us at [email protected] and we'll be happy to help in any way we can!

Mines up. But been in and out all day long. I’m in az

Awesome! Cant wait to hear how it goes!

RoamLink is not a network plan and they dont see any info on the plan or even device type that is using the traffic. This prevents the carrier from performing any type of speed restrictions. The only time the speeds will be reduced is if the tower is at capacity is limited on bandwidth overall. But distance from the tower, antennas, and distance from wifi can all play into how speed is realized.

We dont have direct expereince with TMobile Home units as they are lots of different modles and TMobile keeps changing them. However, the TM Home unit would be a 5G device and have 4 cellular antennas The 22g only has 2 cellular, 2 wifi, 1 gps. I would reach out to our CS team as that is not the right antenna for a 5G device. Email us at [email protected]

Yes we have RoamLink plans for all Peplink hardware. If you want to use your own hardware you just need the plan, not the hardware rental part. Feel free to reach out to CS and they can give you a more direct answer based on what you have on hand. Email us at [email protected]

Absolutely! Especially in areas where there are lots of RVers trying to get online. Using different bands, can help but also this why being on a prioritized plan really helps too.

as a Roamlink customer its also important to note that you can request to be steered to another carrier and also you can use the embedded tools in the Peplink devices to choose the network you connect to in most cases. RoamLink gets you all the providers but there is still some work to do to troubleshoot a poor connection in some cases which was always the case, now you just can do it without paying for more than one provider, that's the beauty of Roamlink. Thanks for the comment.

Very true! There are a lot of variables that are part of your wireless experience.

Thanks for reaching out! I'm sorry for the confusion on this. SpeedFusion does allow for multiple connections to be active at the same time, which allows them to load balance the connection, but the most important feature is that it allows for immediate failover in case one of your internet sources loses its connection the internet. I'm sorry for any confusion about SpeedFusion. If you'd like to discuss SpeedFusion in more depth, reach out to us via email at [email protected] and we'll be happy to help!

@@MobileMustHave so it really doesn't add for example, two 50 mbps connections to have (100 - some overhead) mbps connections then. This seems a lot less appealing if you're paying for two different ISP to only get the lower or higher speed of the two.

@@thedeadbaby yes it will stack or combine two connections. Two identical 50mbps connections will give you 100mbps minus about 15-25% of overhead used for processing the duplicate packets etc and this is based on your settings you choose (for example wan smoothing options that create redundant packets for more reliable connections will cause less overall bandwidth available since some is used to create that redundancy). The tricky part is when you have two connections that are not identical. For example one 100mbps connection and one 50mbps connection. Because the connections need to be balanced to create self-healing and redundancy, that redundancy and added reliability means a trade off where you cannot make up the missing 50mbps on your second connection magically while retaining added connection reliabilty. As a result your more likely with a 50mbps and 100mbps connection combined to get more like 75-100mbps of total capacity because without enough bandwidth on the smaller tunnel its not physically possible for the two connections to match and provide double the bandwidth. Thats not a Peplink thing, thats a limitation of WAN bonding as a whole. That said your connection is now much more stable and any single connection and drop and you will not loose your Zoom call or internet connection. That is the benefit, not just stacking speed which is a plus but not what this really brings to the table. Peplink has done a lot especially in firmware 8.3 and 8.4 to maximize the performance of mismatched connections though and its better than ever. I currently am traveling with 5+ combined connections and getting about 600mbps down and 300 up with multiple cellular + starlink.

There are lots of great places to see what is available across market. You can defiantly get plans directly from the carriers, but then you are locked on one network. By the time you pay for a second plan, in most cases you are now more expensive than the RoamLink plans. And most data plans from carriers are much lower priority. A great 3rd party resource for this is rvmobileinternet.com

We have T-Mobile 55 Magenta, and a total of 80 g between two phones. $90 ish a month. We travel winters, coverage varies tremendously. I've been with folks who had other carriers with better service. I can probably reduce my T-Mobile bill and easily justify. this plan.

Yes! We will get that in queue!

@@MobileMustHave Thank you!

This plan contineus to be problematic as I have lost connection for a third time and now it will not reconnect at all despite having a strong cell signal on both my Verizon (phone) and ATT (car) plans.

Unfortunately, Roamlink is currently restricted to use within the United States only. However, we are constantly trying to improve our plans, so if you are signed up for our email updates, you'll be one of the first to know if we are able to offer data plans for Mexico in the future! If you have any other questions, reach out to us via email at [email protected] and we'll be happy to help!

I have the M100 plan and, like you, I don't have Speed Fusion either. After relisting to the video you only get Speed Fusion with the Duo plans. Unfortunately I struggle to keep the plan connected and working. I have had two power outages, and in both cases I had to contact MMH and have them reset my plan on their end. Sounds like no big deal, but it takes their support up to 24 hours to reply... this has made it a bit unrealible for us and we have StarLink as our primary.

So, we did change our plan listing offerings for the Roamlnk Connect Duo, which are now available in the 500GB and Unlimited options. SpeedFusion is included with Roamlink Connect Duo automatically, but if you wanted to make sure it was setup with your device or had any other questions, reach out to us at [email protected] and we'll be happy to help!

Sounds good. Discussion over my knowledge base. Do you think it would work in Maine, would be my first question. Tnx

Yes! We are activity testing it in Maine with a few RVers. They have reported great signal and faster speeds than their carrier direct plans.

Ya there are some remote places out there. The key is a good roof antenna. My crew loves the New Mexico, Utah, Arizona. I even have signal at Capitol Reef with a roof antenna, but never on my phone.

Yes, that is correct. the $698 price includes $499 for the Roamlink Duo rental and $199 for the 500GB data plan. It just combines the prices to include the rental cost and the monthly fee! If you have any other questions, reach out to us via email at [email protected] and we'll be happy to help!

So, if you have a Winegard 360+ system, it can be integrated with the Roamlink Solo or Roamlink Duo device using our Basecamp enclosure, which allows you to mount the router on your RV's ceiling! I will note the Basecamp is not compatible with the Roamlink Connect Solo 5G, due to its size. Here's a link to Basecamp: mobilemusthave.com/products/basecamp-router-enclosure-for-winegard-360?_pos=1&_psq=basecamp&_ss=e&_v=1.0 If you have any other questions, reach out to us via email at [email protected] and we'll be happy to help!

The solo has lower GB options and still runs with multi-carrier. If you are going with the duo, and truly need dual connection, your GB usage is higher. What is the use case for a lower gb, dual modem connection? There might be an option if the use case is there.

@@MobileMustHave As a hot failover for an unlimited connection. The bulk of data consumption would be on the primary unlimited connection, but mission critical applications could hot failover to dual cellular instead of single cellular for a highly resilient connection.

Got it! For this setup it would be best to purchase a router and not go through RoamLink Connect. You wont have access to the routers backend with Connect. However, you can get the same RoamLink plans for your own peplink hardware. We already have 100gb or 300gb options if you are just looking at plans.

@@MobileMustHave Ah, gotcha. Thank you!

Lets defiantly connect as we have lots of options with pooled plan options or pay-per-gb. Shoot us an email at [email protected]

The TRIO Speedmount is designed for faster speeds. It would do better with that direct wind as it is even lower to the roof surface.

The TRIO Speedmount is designed for faster speeds. It has a much lower profile and I have personally tested it at 70mph multiple times with no issue.

Im glad you like it! Thanks for watching!

if you just need a cellular WAN, the Mini 5G could be a great option. Its has the 5G modem with nothing extra, no wifi, no wifi-as-wan, etc. It will come with basic antennas, and then just plug in your wifi router to the LAN port. For Data plans, you can go to your carrier for an option, or look at the plans we offer. We have special high GB plans that allow more usage that what is normally offered by the carriers directly. Feel free to reach out if you need help selecting a plan. [email protected]

Not yet, but we are working on a Canada add-on option.

For sure, Starlink does work well in a lot of areas, but in our experience, we see that having Starlink + a cellular connection as the best setup to ensure you have the best chance at obtaining a reliable internet signal. That's why Roamlink works very well in combination with Starlink because it allows access to the four best cellular carriers in the country! If you'd like to learn more about how Peplink routers and Roamlink can help improve your internet setup, reach out to us via email at [email protected] and we'll be happy to help!

certainly welcome to use your own sims, that's the configuration we build out business on and a great way to get connected. RoamLink would use all the carrier aggregation and technology of LTE and 5G available in the area you are in on the carrier you connect to (one of the big 3) so there is no draw back and for customers with multiple roamlink connections we can steer each modem to a different primary carrier for each modem, for example Verizon on Modem 1 and ATT on Modem 2 or many customers choose a roamlink sim and pair it with their own carrier direct sim or Starlink. The point is ultimate flexibility and of course RoamLinks benefit is priority access to all carriers for one low price.

Sounds good! You are not locked in with these plans, so if you need to move up or down that is always an option.

True, but how often is that? For most, they are not traveling to extremely remote places without service. And if you are, pair Roamlink and Starlink together. Best of both worlds!

Except you have to pay more per month to bond​ them, the $99 a month isn't enough! This service is not a good value if you already have Starlink. Two weeks in and I'm already regretting it. @@MobileMustHave

@@MobileMustHave it's actually not that hard.....I know a spot 3/4 mile off a major MN state hwy that only has cell signal when atmospheric conditions are good, while that hwy has great signal. Anywhere in the UP of MIchigan is about the same as soon as you get away from a town.

@@CaptConfusion71​​⁠​⁠probably true for phones but with roof antennas (our Parsecs for example are the same used by organizations like the California Hwy patrol) its quite rare we dont have signal. It’s much more frequently our Starlink is obstructed as we like to park under trees or use in motion and we cant loose zoom calls with every bridge overpass. That said we would always only travel with both. Cellular is worst in valleys, they struggle anywhere surrounded by mountains but thats where our Starlink shines. Both have pros and cons and for true unstoppable connectivity you need to look at a multi internet solution or choose to just stay in one place and put up with potential outages (Starlink and cellular carriers had quite a few last year, thats where multi cellular shines as you get all carriers for one price).

@@jefftaylor844 I just camped near Hetch Hetchy reservoir just outside Yosemite and we were completely under trees. Luck for us, we were able to connect with RoamLink via Verizon with speeds good enough to even watch a video. I was pleasantly surprised.

We have not opened up Roamlink for outside of Peplink routers as of today. but subscribe to our email list as that will be the first place we announce updates like expanded router options. it is something we are discussing and making sure we can offer proper support.

Yes. However this router has two sim slots and is eSIM compatible. We have other models that are dual modem so you can have multiple connections to lte/5g simultaneously. Shoot us an email and we can send you more info. [email protected]

Absolutely! You can use one of our Internet bundles that come with a roof antenna or RoamLink connect device and add a roof antenna to that.

Picking a carrier and knowing when to switch are two different flows. It will pick the carrier based on signal strength first then it will confirm it is a good connection via ping. If a ping fails it will then rotate bands and networks to find the next best option. It will only do this when needed. The goal is to not break a current connect. If you are on a zoom meeting, it wont randomly disconnect to make sure its on the 'best'. If that is it connected too is working it will stay on that connection until you move or reboot.

If you have ever purchased or done business with mobile must have you would know that's not true.

It took us so long to put this together to insure that that wont happen. That is also why we went the MVNO route. We wanted to insure that this is carrier level, no IMEI swapping, no tablet plans. When you connect, you connect to the Roamlink network. This is all running on certified carrier hardware (no one else is doing that) with certified, network approved data plans.

Yep! It is true! Carriers have a LOT of control of what type of plan gets what type of speed. Normally, hotspot plans are the lowest priority and will always be slowed down before cell traffic or commercial traffic. RoamLink is only running on the tower level. The carrier never sees our traffic or anything about the connection. So the carrier itself has no way of know what plan you are on, what device you have, etc so it runs at full speed! In our testing we are seeing a 50% speed increase on the same carrier, same bands in some areas. This make a huge difference in congested areas (live big RV destinations).

adding a second reply here. This is Erik the owner. One of the most lucrative parts of the carriers business is roaming agreement with companies like MobileMustHave. Since we pay for every GB (even though our customers don’t), it means we roam with priority over the plans they offer directly to their customers which are for mobile internet (routers). Its not to say we are more of a priority then their “priority customers” like when you pay per gb for more expensive plans (typically around 5-10 dollars per gb), but typically our plans see higher speeds then their “unlimited home internet” or “unlimited legacy” plans which they deprioritize and are open to saying they do this in their terms of service. Hope that helps explain how it all works and thank you for asking.

Not at this time, but there are discounts for mobilemusthave members. You can learn more about our membership here: mobilemusthave.com/pages/memberships

Defiantly reach out to us on email and we can get you a specific answer. But our favorite and top selling antenna is the Parsec Husky 7-1 antenna. Easy to install and top performer.