21 күн бұрын
11 ай бұрын
Пікірлер
@garrymiller8031 4 күн бұрын
Some people wired in a credit indicator bulb on apron
@collinw1353 9 күн бұрын
Gorgar was one of my favorite pinball games! So many quarters.
@Steveos-Gameroom 9 күн бұрын
@@collinw1353 definitely a landmark machine with its speech abut! Classic pin for sure! Cheers!!
@hoosierLowe 16 күн бұрын
where did you pick up that little tube tool for the plastic clips???
@Steveos-Gameroom 16 күн бұрын
@@hoosierLowe the white colored straw type tool that I use to remove PCB’s? Pretty sure they were freebies from Gottlieb back in the day that came in their goodie bags. They are awesome!
@hoosierLowe 16 күн бұрын
@Steveos-Gameroom well bummer. Gonna need one in the very near future and was hoping I could pick one up to keep in the tool pouch.
@Steveos-Gameroom 16 күн бұрын
@ just checked and Steve Young’s Pinball Resource has them under “tools”. “Circuit Board Removal Tool @ $1.80/ea. Looks to be the same. Cheers!!
@christopherbedwell759 Ай бұрын
is there a list of the sizes and quantity for the rubber on the playfield ? Mine needs doing - but I'm thinking of going silicone...
@Steveos-Gameroom Ай бұрын
@@christopherbedwell759 I believe in the online manual there is a page that breaks down the ring size and placement. IPDB Bally Space Invaders
@Steveos-Gameroom Ай бұрын
@@christopherbedwell759 www.ipdb.org/files/2252/Bally_1980_Space_Invaders_Manual.pdf (page9)
@christopherbedwell759 Ай бұрын
@@Steveos-Gameroomlegend thanks so much !!! I’ve also got a really really low level volume coming out now - finally got my SI working by replacing the MPU with the remanufactured ones - it’s a process of elimination…
@Steveos-Gameroom Ай бұрын
@@christopherbedwell759 I think that there’s a volume potentiometer on the sound board. If it’s there exercise it a few times to the left and then the right and see if volume works as intended
@christopherbedwell759 Ай бұрын
@@Steveos-Gameroomdirty pot and a combination of reflowing seems to have fixed the sound issues ( for the moment )
@davesthinktank 2 ай бұрын
Great Restoration! I love the end song. Where did you find it?
@Steveos-Gameroom 2 ай бұрын
@@davesthinktank thanks! I created both songs for this Playboy. Down the road keep your eyes out and I’ll have both songs here in full and maximum clarity. Cheers!
@Riz2336 2 ай бұрын
I played this in a pool hall a while back, it was sort of bittersweet because this was the only arcade machine they had in there where once upon a time they had a whole row of arcades lots of pins but this was the only survivor. It played okay and the playfield wasn't too beat up from years of play
@aaronwadzinski5761 2 ай бұрын
I'm usually a fan of keeping posts stock color, but those pink ones are really cute with the clear posts!
@Steveos-Gameroom 2 ай бұрын
Thank you my friend. I appreciate it! She’s an ugly gal and I thought maybe the pink would be a slight improvement. We love the translucent rings as they allow more illumination than solid rubber. Cheers!
@FuzzyGlowCar 2 ай бұрын
I will always remember the music this machine plays when you press the start button. That "wiiiiii wuuuuu wiiiiii wuuuuu" followed by that little do da doo da doo da doo da doo do do" or something close to that was seared into my drooling prepubescent brain.
@Steveos-Gameroom 2 ай бұрын
@@FuzzyGlowCar love these old Bally pins. Classics!
@Pitbull0669 2 ай бұрын
Ive got one just went though it and New Custom targets ect boy love the game
@Steveos-Gameroom 2 ай бұрын
Great classic machine! Congrats!
@philspinballgameroom5807 3 ай бұрын
Hey, nice video of a very nice and rare Sys11... The music and sound design is epic too. I never noticed the change of the key in the music, is it a special ROM version? Also the shooter loop seems to loop too long on ball 1
@Steveos-Gameroom 3 ай бұрын
@@philspinballgameroom5807 not sure which rom is in it, but I do agree that something funky was going on with the sound in that video. I’ll have to look closer and see if it was a glitch or ??? Cheers!
@philspinballgameroom5807 3 ай бұрын
@@Steveos-Gameroom Cheers :)
@gallimead 3 ай бұрын
Just picked one up. How many connectors??... once you realize ALL have to be pushed into the lower cabinet.. as the head wouldn't fit in my car!!, good idea with the pool noodles
@Steveos-Gameroom 3 ай бұрын
@@gallimead I honestly don’t remember how many connections there are. We have sold our M&MPM Machines. RECOMMENDED: Just take photos as you disconnect each connector and then reverse following the picture order when reconnecting. Cheers
@piervilla3778 3 ай бұрын
Ciao il display e il dnd colore Oppure pind2d Grazie potresti darmi una risposta quando sei più libero
@Steveos-Gameroom 3 ай бұрын
@@piervilla3778 I’m so sorry. I tried to translate and I was unable to do so. Cheers and happy pinball times!!
@keithsmith6356 3 ай бұрын
This guy has took time out of his busy schedule to help me get my space inaders machine up and running great. I cant thank this man enough. I love my machine thank you so much.
@keithsmith6356 3 ай бұрын
Are those all LEDs I just got my machine last week space invaders and want to ad LEDs also do you know how to take this machine out of freeplay?
@Steveos-Gameroom 3 ай бұрын
@@keithsmith6356 99% LEDs. Sourced from Pinball Life and Yoppsicles as seen in my Space Invaders repair video(s) here on KZbin. FreePlay is achieved by lowering replay threshold to 10,000 points for replay credit in the settings. The manual explains how to get to this setting. 10k points is low enough to keep the credits maxed out at 40 credits. Cheers!
@keithsmith6356 3 ай бұрын
I’ve been trying to figure out how to change and where to change these settings but I guess since no one wants to tell me I guess I have to figure it out thanks again.
@Steveos-Gameroom 3 ай бұрын
@@keithsmith6356 on page 6 and on page 8. Setting to credit and adjusting scoring down to 10,000 points. www.ipdb.org/files/2252/Bally_1980_Space_Invaders_Manual_no_schematics.pdf
@keithsmith6356 3 ай бұрын
@@Steveos-Gameroom I’m on page 6 I’m sorry I’m old and it’s hard for me to understand but I still have not found how to get this machine off free play. It’s okay someday I’ll figure it out as of now I’m going to life the table completely up so I can work on the lighting. This machine is really in good condition but I’m OCD I want it to play just like it did in 1980. Accepting coins all lights working everything as it was. On the display where it shows ball the left credit area does not display anything I’m assuming because it’s in free play mode I don’t really know. I’m going to continue to try and figure out this free play mode and lighting, my LED should be in Monday wish me luck
@Steveos-Gameroom 3 ай бұрын
@@keithsmith6356 i believe there is a dip switch setting to show credits or not
@jlarsson1978 4 ай бұрын
This is really good! Are you a musician?
@Steveos-Gameroom 4 ай бұрын
@@jlarsson1978 thanks! I’m a big music lover, but not a musician. ….maybe in my next life….
@Ginanjardinar 4 ай бұрын
Teman, ,seperti apa suara Yang dihasilkan dari DAC bluetooth ini? Apakah terdengar bagus atau biasa saja! Menurut pendengaran anda.
@BLACKROSEMF 4 ай бұрын
Best thing for All B/W pins .. EnjOy your BR matte
@Steveos-Gameroom 4 ай бұрын
Cheers! @Blackrosemf
@ichaukan 4 ай бұрын
I hadn't played pinball since the mid 90s and finally found my way back into an OG arcade a week ago. This table was the first I played and I already adore it.
@Steveos-Gameroom 4 ай бұрын
It’s a solid machine for sure.👏
@jameswilson4426 4 ай бұрын
Well, color me jealous! (Flowst on Pinside).
@Steveos-Gameroom 4 ай бұрын
@@jameswilson4426 lol.. this old classic Bally plays pretty tough even after all these years!! Cheers!
@greenlantern1123 5 ай бұрын
Picking one up finally ! 🎃 subscribed. You are very good and informative at what you do. Thanks !
@Steveos-Gameroom 5 ай бұрын
Very kind words. Thank you! + HWN is great. Welcome to the club!!
@shock_me-gl9tw 5 ай бұрын
Hi Steve. I'd like to add an led strip to the trough area like you have. I have a 12V strip I can use, but would like to know how you wired it in. Nice job here btw. I've always thought adding two spots like you have would work great, now it's certain.
@Steveos-Gameroom 5 ай бұрын
You know…. I kinda have forgotten, but what makes sense to me is that I sent a long, long wire from the led strip all the way to the back of the playfield and then down in the bottom of the cabinet, then sent the same wire all the way to the front of the bottom cabinet to the largish sized circuit board below the left flipper (coin door pcb? I tink 12V is printed on the board near the male pin). There is an unused male pin there that is 12 volts DC. I know that it’s a long path to get the voltage, but it was just there and being unused, so I chose it. Now as far as the ground wire for the led strip, I kinda feel like I just found (with my multimeter) a common ground close by the led strip and only sent a short single positive wire. There’s very likely an easier way, but heck, I had the extra wire and I didn’t hack into any used existing 12v. Cheers to you and your project!
@shock_me-gl9tw 5 ай бұрын
@@Steveos-Gameroom I see that pin for 12vdc on the board and also a power ground pin. I'm assuming I can use that ground?
@Steveos-Gameroom 5 ай бұрын
@@shock_me-gl9tw I believe that should work for your ground. If you have a multimeter you can test it, but I believe it should be a good and solid ground. I usually use little alligator clips to verify good power before finally soldering the connections to their final positions.
@salvatoreangelo5270 5 ай бұрын
Hi can you please give me Information on the balligator arm thickness and the material it’s made from I need to make one the my nip it
@Steveos-Gameroom 5 ай бұрын
Measuring it, it appears to be 7/32” to 1/4” inch. I’m unsure if it is solid metal or tube. At the ends (under the playfield) the ends have a flathead type screws going up into the material to connect it to the armature.
@Steveos-Gameroom 5 ай бұрын
Measuring it again it [may] be as small as 3/16” diameter. My measurement tool is pretty imprecise to measure it exactly.
@salvatoreangelo5270 5 ай бұрын
Thank you for your reply and time
@greenlantern1123 5 ай бұрын
Just picked one up. Had to have it. First pin I ever played when I was little kid. Amazed by it. Just hope I don’t have any issues because I would be hard pressed to find someone in New York who could service it.
@Steveos-Gameroom 5 ай бұрын
Congratulations and welcome to the Club! I love this pinball system and once learned it’s pretty robust system. Cheers!!
@greenlantern1123 5 ай бұрын
@@Steveos-Gameroom 🙏🏻 thank you !!!
@greenlantern1123 5 ай бұрын
I’m back to 10 years old again. Just picked one up! This was the first pin I played. Love it. Classic❤
@Steveos-Gameroom 5 ай бұрын
👏 Bravo!!
@mphenriksen 5 ай бұрын
DMD dot design on these look great
@delsarcade 6 ай бұрын
Nice vid. I'd like to add some custom music (70's vibe) to my Bally's Strikes and Spares. However, I'd also like to add some custom female sounds that say, "Oooh! a Strike!" (Think Dragons Lair Daphne type voiceover). I'm thinking an Arduino controller of some sort with wires directly to the switches.
@Steveos-Gameroom 6 ай бұрын
Cool ideas! I’ve tried using original switches connected to the MPU and had conflicts. Maybe some kind of isolating may work. I’m interested if you can pull this off. Please let me know as I’d love to do the same. Cheers!!
@delsarcade 6 ай бұрын
Looks like someone did what we envision on a Bally Paragon. The guy used an Arduino in conjunction with the Wave Trigger. kzbin.info/www/bejne/jHXIdIeepNyInqssi=aM8LNXCBh1k8suFU
@psychoween 6 ай бұрын
It was great hearing those sounds again. I have always loved the infinity mirrored back glass. Would love to own one some day.
@Steveos-Gameroom 6 ай бұрын
Thanks!! These classics still stand tall today! Cheers~
@hughjass8383 6 ай бұрын
They need to add Silver Shamrock and the other Season of the Witch music in this too
@greenlantern1123 5 ай бұрын
That would be great addition
@noneofyourbusiness9369 6 ай бұрын
We're old so bare with us. Is the pin ball machine real or is this a music video? Either way we like the pin ball machine and enjoyed the music. We also watch Rust Brother's.
@Steveos-Gameroom 6 ай бұрын
It is a real pinball machine. It was originally a Chicago Coin “Top Ten” and I modified it to be Rust Bros theme. We are Rust Bros viewer family! Cheers!!
@noneofyourbusiness9369 6 ай бұрын
@@Steveos-Gameroom Thank you for the info. Our family are big fan's of Rusk Brothers.
@Kiwitrailchannel 6 ай бұрын
People who own these kinds of games are real ledgends
@SkitzoFPV 7 ай бұрын
Man... that is in really good shape. Such a cool relic! Thanks for sharing!
@Steveos-Gameroom 7 ай бұрын
Thanks! Glad you liked it! It’s a real fun playing 😊and rare System 11 game. Cheers!
@Dylpickle1111 7 ай бұрын
Bro you suck
@Mo_Ketchups 7 ай бұрын
👏👏👏👏👏👏 👌 I’m a FULL electronics noob who LOVES pinball, so THIS brilliant troubleshooting job is WHY I watch these videos when I can find them. I’ve learned SO MUCH just TODAY binging a handful of your stuff. 🤘🤙
@Mo_Ketchups 7 ай бұрын
This has dampened my will to live. I had ta pull teeth just puttin TWO pins in my pad! And as you know, they love to be in groups. NEED to be! 🤦♂️
@Mo_Ketchups 7 ай бұрын
God, what a fun pin that is. I’d love to have a line of cartoon-themed pins together, including this, Looney, Popeye, Toy Story, etc. <sigh> We can dream. 🥳
@Mo_Ketchups 7 ай бұрын
If you go back to the before footage, you’ll notice the second C in “CONCRETE” bulb wasn’t working. Once you fiddled w the pin, it suddenly worked. 👀😯😅🤷♂️
@Steveos-Gameroom 7 ай бұрын
Yep. All true. I think in one of my The Big Lebowski videos I segway over at the end and pull and reflowing 3 or 4 Flintstones playfield lamp pcbs. 😂. Cheers!
@Mo_Ketchups 7 ай бұрын
I’m likin these vids you’re posting, man. Keep em comin! ✌️🤙
@Steveos-Gameroom 7 ай бұрын
Thank you aj! Much appreciated!! I’m doing a big pinball project and hopefully I can reveal it sooner than later. ✌️ Peace
@Mo_Ketchups 7 ай бұрын
I just saw they have BOTH flat/covered-top and these hollow ones you got. This place is amazing! I’m DEFINITELY getting some for my JP Premium (color choice is WAY too hard because gold, brown/rust, green, AND blood red ALL would look killer)!
@Steveos-Gameroom 7 ай бұрын
It’s nice having lots of options with cool mods for our machines! 👏 Cheers!
@RearviewMirror-ij2pr 8 ай бұрын
Looking to buy one of these.
@Steveos-Gameroom 8 ай бұрын
Cool machine. Pretty rare to find, but they do come up for sale every now and again. PP fits right into a good sized lineup well IMO. Cheers!
@RearviewMirror-ij2pr 8 ай бұрын
Nice! Thanks for sharing.
@Steveos-Gameroom 8 ай бұрын
Thank you!! Glad that you chose to view it. I find that Riverboat Gambler is a super fun machine!! Cheers!
@RearviewMirror-ij2pr 8 ай бұрын
@@Steveos-Gameroom I have one myself and am currently troubleshooting the diverter and both drop target banks-none of them are activating.
@Steveos-Gameroom 8 ай бұрын
@@RearviewMirror-ij2pr I would check all fuses (pages 41+) and verify all fuses have continuity. www.ipdb.org/files/1966/Williams_1990_Riverboat_Gambler_Operations_Manual_August_1990.pdf Also check for fuses below the playfield (not sure if there are any). I’d then check the wire colors of the the diverter and drop target banks and follow them back to their origins. Also any connectors along the pathways. Cheers!
@RearviewMirror-ij2pr 8 ай бұрын
@@Steveos-Gameroom Yeah I already checked their fine..Looking at the drive transistors now. All of the connectors have been re-pinned. Thanks for the manual link!
@Steveos-Gameroom 8 ай бұрын
@@RearviewMirror-ij2pr Be persistent and start with the most simplest before assuming the most complex. For me it’s been mostly simple remedies and sometimes taking another direction of thought. Oftentimes I come up with the correct resolution after sleeping on it. Keep me posted!
@kellyr9053 8 ай бұрын
Promo`SM 💖
@LordBBH 8 ай бұрын
was thinking about how arcades in the 90's would always be filled with this cabinet screaming "TWELVE POINT PLAY!" and "that's da bombbbb" at a louder decibel level than most other games in the arcade
@fusfuster1805 8 ай бұрын
Juez dredd o demolition man para tenerla en casa?? Buenos videos tienes en tu canal!! Se ve espectacular la dredd como ha quedado
@Steveos-Gameroom 8 ай бұрын
Thank you! We have both machines in our home for many years and both are very, very good and fun machines.
@ricksgarcade 8 ай бұрын
Right flipper looks like it’s got a hop on return to resting position vs the left. I’ve been curious to see how these played.
@Steveos-Gameroom 8 ай бұрын
After several games these PPP flippers they seem to me to be more accurate and responsive overall. Ball hop seems to me to be less than the factory Sega setup and for an average player (me) they hit the mark and are consistent. They are definitely on the pricey side, but I do feel that the potential of their lasting performance due to their high-tolerance construction edges out the initial coin that I had laid out to get them. Plus.. they look extremely alien in an awesome way. No regrets with this flipper mod. Cheers and happy flipping!!
@ngtflyer 8 ай бұрын
Sounds like it has a swapped sound ROM
@urapooptchi 8 ай бұрын
Definitely wishful thinking... Pulled mine down last weekend with locked DW motor and it's either money or engineering....
@Steveos-Gameroom 8 ай бұрын
So pretty quickly after this video was uploaded my deadworld locked up again. I did enough research to realize that a replacement gearbox was an expensive direction. I pulled the gearbox again and soaked it with a combination of carburetor and brake cleaner and then blew it out with air from my shop compressor. I then extensively tested it out on the bench where it then worked phenomenally. Reinstalled it and it's functioning perfect. Fingers are crossed for sure.... But in the back of my mind it's a just ticking time bomb that I'm just waiting for it to say, "sorry that's all folks!" Cheers and good luck with your DW motor issue.
@urapooptchi 8 ай бұрын
@@Steveos-Gameroom the guy I purchased mine from noted that the opto interrupter, the the small globe spins on, rubs on the inner shaft causing them to bind up and that us what causes the stop and gear spinning on shaft. Mine was stuck and wouldn't turn. As soon as he got the interrupter shaft off, it freed up. Now he's been sanding the inner shaft to a smaller diameter, if that's possible. I'll find out this weekend how it plays out. I'll let you know what I learn
@danielschiavo5371 8 ай бұрын
Hi Steve, very well done, the lighting in the middle and lower zone are perfect, and they are very important because they highlight the antagonist sides Judge Dredd and The Dark Judges. They make shine the vibrant colors of that cool comic art. And the Eagle under iluminated is a very simple and cleaver mod, I will do it with mine! Here in Argentina there was a lot of 90´s pinballs machines, because at that time a liberal goverment established parity with US dollar made pinballs very affordable for operators, imagine one pinball machine pays itself in one single summer holiday 🤯 At that time the president of Williams came to Argentina to look what was going on, because we were the country who bought most pinballs machines outside USA...🤩💪💪 You have a new suscriber now, greetings from Buenos Aires 🙂
@Steveos-Gameroom 8 ай бұрын
Welcome!! Your kind words are greatly appreciated! Thank you. You’ve offered an incredible insight to the 1990’s pinball scene of Argentina. My illuminating modifications were done very inexpensively but still yielding nice results. Cheers my friend, good luck with your Judge Dredd pinball machine.
@mesapysch 8 ай бұрын
I need my Future Spa to play Gary Numan too!
@Steveos-Gameroom 8 ай бұрын
I wouldn’t have it any other way! And the longer the individual ball time, the better it gets!! Cheers!
@Steveos-Gameroom 8 ай бұрын
For more: Start @ 4:50 kzbin.info/www/bejne/pJjLeJ-LZ76irKMfeature=shared
@andimasters5758 9 ай бұрын
Just a note...your right ramp gate isn't working - it is supposed to remain open to send the ball to the right flipper (from the Orion) until you get to multi-ball....your gate isn't opening at all - thus sending all balls to the upper flipper....