www.mediafire.com/file/2e2bi4ect7ebt41/GP80Printer+Driver+V17.exe/file Select printer model: GP-80300Series

@@sajtechysolutions6657 thank you brother

After the latest Windows 10/11 update, it takes a little time for a printer to appear in the "devices and printers" section. Otherwise, check the installed printer in the "Print Management" section.

@@sajtechysolutions6657 Thank You 😊 🙏

Try to do firmware update. supportcommunity.zebra.com/s/article/Zebra-Printer-Firmware-Upgrade-Information?language=en_US

@@sajtechysolutions6657 Thanks for the Quick Response. Although I tried some of those options but the issue also the Printer cant detect on PC even after plugging in.

Driver link: www.mediafire.com/file/vpqmwmo6bgxjjke/GA-Printer_Driver_v2.0N.exe/file

Utility link: www.mediafire.com/file/2p8oaaxwljru7jy/G80Utility.zip/file

Zebra Designer 3 Professional Version is free for 1 month; after that, the software directly goes to the basic mode (Essentials).

please if you downloaded the software, can you pass it to me

First take self test from printer and note printer current IP address. * If DHCP is showing ON , then do the following steps: Connect LAN cable to the printer, turn ON Printer, go to POS Machine /Laptop(that connected in the same network). Browse the printer IP in Chrome/ Edge. You will get printer IP settings page, Click on configuration, click on fixed IP. Turn OFF DHCP. You can give new IP or same IP showing there. Click set, click restart. Do the self test again, recheck IP and DHCP settings. Do the IP ping

@@sajtechysolutions6657 Hi, i did the self test and i found the ip of the printer and i change my laptop ip as same to the same network of the printer ip. I try to ping the printer , it is pinging fine. But when i try to search the ip in the chrome browser, no result found coming.

Replied on mail

hI@@sajtechysolutions6657 i HAVE IRP 200D BUT DHCP SHOWING DISABLED HOW CAN I CONNECT TO ETHERNET

Yes, Use Resin ribbon and set darkness little high 22/23

Please mail me [email protected] I will reply on that

Hi, For excel connectivity upgrade designer software to Professional version. For that need to purchase designer3 Pro license. For new installation 30days Pro version trail available.

Try below driver, select POS-80C on selection. www.mediafire.com/download/e2rcp4wooivmt0k

Can you provide more details?

Can you provide more details? Does the port you selected is correct?

@@sajtechysolutions6657 yeah, so the issue that, I was use the 300+, and it’s want work as long I completely didn’t delete the old drivers and clean the port. After all went well thanks again

Yes, you need to calibrate whenever you change to different size stickers. You can roll it back, but still 2-5 sticker will waste depends on the sticler size.

The application will initially run as the free Essentials edition. At any time you may choose to start a 30-day trial of the Professional edition or activate a purchased license key. After the 30-day trial has expired, the software will revert to the free Essentials edition

Press and hold power button atleast 5 to 10 seconds, the printer will turn OFF

@@sajtechysolutions6657 thankyou!

Go to Control pannel > devices and printers > right click on zdesigner zd220 > printing preferences > there you can see darkness adjust option. Don't put maximum darkness, it will damage printer head.

Can you explain little more about custom fonts that using. Any specific language you want to print? Normal case if your software using printer windows driver, the driver will take care fonts.

First check your network IP range, then printer IP. if both are different, then change printer IP to the range of your network.

@@sajtechysolutions6657 yeah I think it'll help

@@sajtechysolutions6657 but guaid me plz how I can check IP addresses are same Or different

@@sajtechysolutions6657 I can see network IP but printer IP where I can see

From the printer self test you can see the IP, it is in the video on starting section

If your tablet/wireless device is connected in the same router that connects the printer, then it will work. But some cases its depends on the software that you are using for the printer.

Yes, that time you need to use direct thermal stickers

Check the sensor postion, move it to right end side postion

Set the correct sticker size in printing preferences option of installed printer(under Control Panel > devices and printer) Select direct thermal or thermal transfer option depends on ribbon use. Also please check sensor postion.