Where would I get the cord for my professional portable speaker jet-15 toptech audio.its a DC 9v 1.5A.power changer cord

Do y'all at Bop have a handle on the RB DMX lighting? Any updates on that in 7?

Anyone out there struggling with getting to grips with it don’t give up, it’s takes time but it’s worth the effort and one day it just clicks and you’ll have it. Once you master the art it never leaves you.

razer sharp crystal clear

background music is way too LOUD!

Nice

I ran over my pair of silver concord in the case with my car back in the 90s by accident, and to my surprise my car didn’t even crush em, unscathed and lasted years after that. Became a lifelong ortifon person 😂

If I connect DDJ-FLX4 to the Recordbox 7, does the recording function require payment in performance mode?

Great review.

The RELOOP RP 8000 MK2 WORKS WITH RANE SIXTY TWO MIXER ? please help

Does the unit works with Traktor?

I think you picked up bad habits from NOT using technics man.

You have hold the effects button down while scrolling to scroll through the effects. Be very exact on your directions or people will get upset for mid direction. It happens

My inbuilt laptop speakers are not working with this, they work normally when not connected to the flx4. any tips to fix that please? I'm using rekordbox by the way.

Is the needle not supposed to touch the record at all, prior to setting the ring to zero?

@RaneDJ make a 1272 Performer! I'll GLADLY PAY $4,000! But it has to have a multi-touch 10" display, wifi, Stems w/ fx, 4 channel ins in which fx can be applied, music aggregate streaming, Bluetooth, SSD hard drive slot, Ableton Link, Booth & Zone outs, etc. @denon_dj take notes!

Best The Problem is affording it

Could you recommend the RCF soobwoofer for this?

What about for the iPhone 15 pro? I tried plugging in my usb into the mixer to the now usb-C on my iPhone and it wasn’t working 😕

Does the transmitter have a 3.5 mm audio cable connector too (to connect to an audio interface), or just the USB-C connector?

Yes that was really clear and helpful ❤

good video man, but the 90s Italo tunes I mix are 32 or 16 beats before you mix, never tried to mix new stuff but old skool is full of vocals and piano, if you naff it you end up with 2 piano tracks at the same time or two vocals at the same time.... you have to have a good memory

What's your recommendations for the mixer settings inside the unit for basic mixing? I'm not seeing anything online for this. Specifically, the EQ and Filters. Thanks

what if im using my rr with my pc with video hook up?

😮 is this a babyscratch for the eminem houdini song,,, dudes you such a joke and i hope one day you guys learn how to feel ashamed

how you can import a playlist from rekordbox on my macbook to the app?

It's also on the FX pad if you so choose to use it with out holding shift. press the pad FX or pad FX + shift to get to the secondary FX bank and just use it there with the appropriate pad button.

is there ANYONE who actually lets you hear an audio A/B??? Talking about sound quality is like tap dancing about architecture.

It doesn't work with ddj-flx4

I can’t get the audio to play from my phone when connected to deck how can I fix this

Hii🎉

Can you explain what to do when you've lost your power cables for bx8a's? The fuse is 15 amps but power cables are all 13 amps. Can you still buy/use the cables? Is it safe?

Do you have to use the denon engine prime software to load up music into the controller? or can you just plug in any USB stick and it will load and play songs?

Hey man for some reason I’m having trouble playing the track out loud on my phone when contacted via Bluetooth

Why does the app record only 1 deck and not Deck 2, I keep running into this issue , it doesn’t record the transition, and keeps recording the loop when I’m mixing out , and sometimes there’s a gap in the recording with no music , please help ? What am I doing wrong ?

I have a question?? Can you just change the stylus, are they all compatible? Do the headshells/body have the same output?

How do you put the stems as the pads

Pointless 😂

With a one time purchase for the long haul would you choose the rev5 or Hercules T7? Please give me your advice on this matter and why.

A really helpful and concise video thank u ❤

Thank you!

alignment tool not working

I spent 8 hours yesterday trying to get my laptop to recognise this hardware. I followed the instructions to the T! I ended up going to the pub with a headache, if this video doesn't help I'm going to smash it! $600 for a ducking headache, that's money well spent 😂 Edit - ok , I'm really annoyed now. You took the easy way out, Mac being class compliant of course it just works. How about you do the hatd way and follow YOUR instructions with a PC laptop? The asio driver will NOT recognise the hardware, my laptop is new, satisfies the requirements set out in the manual, downloaded serato pro (it won't automatically boot as you said it would, flux won't give licence key, so Serato website thinks I'm just a member and not a legitimate key holder), serato pro WILL NOT PROMPT TO GET INSTALL ASIO DRIVER, so I MANUALLY DOWNLOADED, and still eff all. I'm a content creator and have big respect for Reloop and the quality of your products, I was hoping that this would be an amazing addition to my gear. I ahould have bought the CRSS instead. Furthermore, have installed latest Java RE , turned off ALL apps as per manual, LAUNCHED the Reloop firmware update App (flux is ver 1.02), click open NO "START" option, and GUESS WHAT? NOTHING HAPPENS! Tried EVERYTHING AGAIN as I noticed the firmware update only applies to a Lenovo laptop fix, still bugger all. Have pursued ALL AVENUES ON YOUR SITE for fix... My setup - - i7 pc lappy with 8 gig ram - Xone 43c mixer - 2 x Technics 1210 mk7RB - Reloop RMP1700RX - Reloop FLUX It utterly astounds me that you post a video that is basically showing a PERFECT WORLD SCENARIO! NOT HAPPY JAN! 😢😊😢 smiling and grimacing at the same time. Honestly I bought this as an "easy solution" to adding my digital library to my mix sets, I should have stayed analogue, and in a further day of effort will return this device to retailer, with a new outlook on the Reloop group. Note - I have LED feedback on device, it is receiving signals from both my Serato control vinyl on both turntables. Hub and USB/DC leds light up but not my PD led. I am using the supplied usb cables. I'm forced to manually start Serato, "sign into Serato DJ Pro pop-up shows at bottom of screen stating"signing in is required to activate licences and expansions". I click on "sign in" button, website opens, asks to continue as "my email ", i click "continue ", web page states "almost done..." "follow the prompt to get back to Serato DJ Pro, but NO PROMPT SHOWS!!! Under MANAGE DEVICES - "No devices here yet". In PRODUCTS SECTION its asking to enter product licence code?!?! And requesting payment for buy or subscription. I HAVE DONE EVERYTHING, EVERY THING! VERY VERY UNHAPPY The 50 minute video i made yesterday for my KZbin channel where I absolutely rave about and praise Reloop products, seems that it will be destined for the Recycle ♻️ bin......😢

The moment I release the record on the second turntable at the cue, I can’t tell which track is faster or slower than the other. My brain just can’t separate which is which.

What pioneer doesn’t tell you, is one will arrive with a dead internal magnet… .. PLX1000 retuned loose tone arm, CRSS12 returning magnet not workings. QC Pioneer?

What cable to I need?

Having platter issues with this controller, 2nd Mixon freezing when scratching and platter issues.

C’est trop cher ! Meme les premiers modeles de tables de mixage de la marque REALISTIC, qui ressemble beaucoup, ne coutait pas aussi cher. C est que du business !

I'm having popping noises coming from my speakers when I turn up the volume I'm playing music from serato DJ pro what can I do to fix this problem

Great performance guys! How do you sync 2 Traktors on 2 different computers?