I refer the Daicamping Dl30 but it does not come in Titanium version.
@magicscorner15 сағат бұрын
Is that a hospital while light or a warm white light?
@jaylagare2 сағат бұрын
It’s a cool white light.
@novachrono22366 күн бұрын
Thanks for this man. When do you usually replace the belt? Im at 52k kms in.
@jaylagare5 күн бұрын
You’re welcome. In my case, I didn’t replace till it started squeaking. It was around 50k. But it turned out to be more of the drive belt tensioner. I’d suggest replacing both if they’ve never been replaced. kzbin.info/www/bejne/j4S6lqKJf9Srd7M
@kvernesdotten8 күн бұрын
I went black oxide and went back after, the coating seems to make the tool much stiffer and harder to break in. It does look cool though
@jaylagare6 күн бұрын
Your observations are similar to mine as well as others. I guess it boils down to individual preference between the two.
@Xpresstrainography11 күн бұрын
Bewdy. Worded exactly perfect for me. Many thanks.
@jaylagare11 күн бұрын
You’re welcome! Glad to be of help.
@Vakhtang_Magradze11 күн бұрын
@Jay Lagare Can you tell me please, can I use this microphone to record voice on laptop that has standard 3.5 millimeter jack?
@jaylagare11 күн бұрын
Yes, you definitely can!
@Vakhtang_Magradze11 күн бұрын
@@jaylagare Thanks! i will not need any other device/cable, right?
@johandeklerk297511 күн бұрын
Tanks heaps
@jaylagare11 күн бұрын
Glad to be of help!
@georgevaldez144913 күн бұрын
cool where did you find the LED drop-in module.
@jaylagare11 күн бұрын
I found mine online, on Shopee. But you should be able to find it on AliExpress as well.
@RobertoArangoSalazar21 күн бұрын
Can you please share the link again? It says it has been deleted again. Thank you.
@jaylagare18 күн бұрын
I updated the link. Please try it now.
@allanjonalisidro700725 күн бұрын
Wala pa ako nabalitaan na nasira or naputol na plier jaw nitong model na ito. Matibay talaga pag victorinox
@Pasdechevredreamer27 күн бұрын
Fantastic clear, worth while video.
@jaylagare26 күн бұрын
Thank you! Glad you think so!
@Pasdechevredreamer26 күн бұрын
@@jaylagare Thank you very much for video. Although I couldn’t unwind the wire due to it being locked in, I soldered another bit of wire onto the overall winding, which got everything working again..
@greenskynzАй бұрын
i suspect the wires break due to applying too much pressure when using the tool
@jaylagareАй бұрын
Could be. But the shaft seems to be well-supported by the bearings and there’s an air gap between the rotor and the wires. My own suspicion is that it’s due to a loosely installed wire vibrating and eventually breaking from friction or fatigue.
@darkflash32Ай бұрын
How often should you change wiper blades?
@jaylagareАй бұрын
Wiper blades should generally be inspected regularly and changed every six months to a year, depending on factors such as your local conditions and the quality of the blades themselves.
@VictorUgwunzeАй бұрын
My itel star 200 stop working cause I plug in a cord connect to brushless DC motor pls I need help
@richh5824Ай бұрын
I wonder why every deemed I have owned breaks? I am looking for a good professional alternative to this pos! I also wonder why it is only good for lefties when using a cutoff wheel? If you are right handed it throws sparks right at you! Never buying another deemed again, they just do not hold up!
@jaylagareАй бұрын
Agree, the stator design seems fragile. Wire broke 2-3 times on me already. Thankfully, was able to fix it so far.
@kevola5739Ай бұрын
I find the black oxide does not operate as smoothly and can rub off on your hands with hard use. It is also hard to see when laid down on the ground or in a dim lit area. If you are cutting food you will be consuming this coating. I do not see any advantage of black oxide other than stealth.
@jaylagareАй бұрын
Agree, it’s really more for reduced signature use.
@AbishekSnr-ht2mpАй бұрын
Whau to using Android phone Plz tell me
@jaylagareАй бұрын
Your Android phone just needs to have a 3.5mm jack or a USB-C to 3.5mm adapter.
@SulimannSagaАй бұрын
Thanks! That saved my Dremel!
@jaylagareАй бұрын
Glad it helped!
@JDanScАй бұрын
The “X” means that it comes with scissors
@jaylagareАй бұрын
You’re absolutely, right! Thank you for sharing.
@AlphonsoSnorkelli-dg2qbАй бұрын
Pos.. Fish eye, red spots. Not 1, not 2 but 3 replaced..
@yakup2546Ай бұрын
Charging board not available
@MrJturner74Ай бұрын
That is not actually the first version. The first version didn't have rivets on the side, those were added later after complaints.
@jaylagareАй бұрын
This is nice to know. Thank you for sharing!
@ModernTacticalShootingАй бұрын
I still have my Wave issued to me back in 1999 from 5th Special Forces Group
@jaylagareАй бұрын
Definitely tough and has aged well.
@TacticalBunnyCAАй бұрын
OG Wave is my fave! ❤ It a little lighter, I never had a major issue with just slip joints on the secondary tools and I always have hated the flattened proprietary LM bits which really seemed like its their function was a way to drain extra money from customers at excessive prices and then as a tool only after the money. I broke so many of the "jewelry" sized bits that I just started to consider it a right off space. Dropping $20 bucks on a whole box of bit adapters when you only need one adapter gets really old after you've done it for the second or third time 🤬!
@jaylagareАй бұрын
Couldn’t agree more!
@philfrydman25762 ай бұрын
Unwinding is a possibility. Out of 100 more or less windings, 1 winding less will not unbalance the electromagnetic field. Another solution is to extend the broken line with a similar diameter connection (requires soldering though)
@samuelyoung99322 ай бұрын
Thanks for sharing. Leatherman is a quality tool. Everyone will snatch it when you laid it around without any attention. My fellow workers or even my nephews got their Leatherman walked away without a trace. I have a few Leatherman myself for different occasions 🙏👍
@jaylagare2 ай бұрын
I like to think that they’re out there somewhere being put to good use… or being put for sale on eBay 😸
@scrapperstacker86292 ай бұрын
My original wave came with a leather sheath
@jaylagare2 ай бұрын
I was torn between the two sheath options but eventually the synthetic won.
@deykno872 ай бұрын
Why are we making a vid on this washed multi tool..arc me please
@yngvi912 ай бұрын
Because the original wave is legendary and your pretty fancy arc wouldn’t exist if the wave hadn’t come first
@jaylagare2 ай бұрын
This. Plus it’s still quite relevant. I was pleasantly surprised when I realized that almost everything the Wave+ has, the original Wave already had. But definitely planning an Arc vid. Watch out for it!
@karenclarke42922 ай бұрын
As a female it's always concerning to undertake repairs that men seem able to do with their eyes closed but this video makes everything easy. Thank you so much for such a detailed explanation on how to repair a Dremel.
@jaylagare2 ай бұрын
You’re welcome! Glad it helped. I know what you mean. One of the reasons for these videos is to show my daughters how to do these things.
@berklyng17732 ай бұрын
Is it true that Li-po batteries not safe to bring in an airplane ? Power bank made from 18650 Li-ion is safer ?
@jaylagare2 ай бұрын
Both types are generally safe and are normally allowed as hand carry in an airplane up to 100Wh (around 27000mAh for typical power banks).
@Ace-dh5lz2 ай бұрын
everything is going great but the mutli mod isnt showing up in my port
@jaylagare2 ай бұрын
Possible it’s a driver issue
@chizolini2 ай бұрын
Hi, I know this isn't the subject of the video, but I bought a Furious true-d V3 and I can't find the firmware to update. Did you happen to update yours? Would you have the file to help me?
@jaylagare2 ай бұрын
Sorry, took me a while to find it file.io/4A1B3CWvxt69
@chizolini2 ай бұрын
@@jaylagare I'm trying to download it from your link, but it says it has been deleted
@jaylagare2 ай бұрын
I updated the link. Please try now.
@RobertoArangoSalazar17 күн бұрын
@@jaylagare Link still not working. 😢. Thank you. I really appreciate your help.
@JesusKing11052 ай бұрын
Are the pliers spring loaded?
@jaylagare2 ай бұрын
They’re not spring-loaded.
@parametrize3 ай бұрын
Don’t know which one was first, but its full replica of leatherman wave+
@jaylagare3 ай бұрын
The Leatherman Wave+ came out first and, yes, this is an outright copy.
@eadghe3 ай бұрын
Sweden is the land of IKEA, but not of Lego. Lego is a Danish company, mate. ;^)
@jaylagare3 ай бұрын
You’re right! I got my Scandinavian countries mixed up. Thanks for the correction!
@Marukas33 ай бұрын
It solved my problem, thank you!!!
@jaylagare3 ай бұрын
Glad it helped!
@edcturk3 ай бұрын
Is there copy of leatherman free p4 or arc you know
@jaylagare3 ай бұрын
As of now, the patents for those are still in effect. But in terms of toolset, the DL7 is somewhat similar to the P4 and Arc.
@edcturk3 ай бұрын
@@jaylagare what about motion of plier, cause i like to play like a ballisom blade like free p4. Is it smiliar as well
@jaylagare3 ай бұрын
Ah, indeed that’s fun! But, unfortunately, you won’t get that on the DL7. It has regular stiff pivots.
@edcturk3 ай бұрын
@@jaylagare thats important for me, thank you so much
@JOHNLEXXX3 сағат бұрын
@@edcturk I adjust the screws a little bit, and now everything open super smooth.
@Gieszkanne3 ай бұрын
Use a single 16650. Its under 6V. Work fine with regular SF G2X and other that dont tak 18650ies.
@jaylagare3 ай бұрын
Would have saved me sa lot of trouble… and a LED module.
@johannes47593 ай бұрын
Hey, you probably won’t answer but: I want to record Hi8 Content tapeless and am searching for a budget solution. Is this gonna record my AV output from my digital camera if I connect it?
@jaylagare3 ай бұрын
Not familiar with Hi8 but if it sends PAL/NTSC then this should be able to record the AV signal.
@the_jonasa3 ай бұрын
hi I had the same idea! was wondering if you actually ended up trying it?
@joshualiddicoat27054 ай бұрын
What year model is this
@jaylagare4 ай бұрын
2017 LS-A
@333BlkFlagg4 ай бұрын
Brilliant!
@allanjonalisidro70074 ай бұрын
Mas maganda sana kung hindi replaceable wire cutter ung plier head nya. Hindi kasi matibay pag ganyan ang plier head.
@ROTTENMUSTBEKILLED4 ай бұрын
Sadly all I get is a black screen and static noise... what can I do to fix that?
@jaylagare4 ай бұрын
Make sure your input NTSC/PAL signal is confirmed good.
@GeorgeOhYesPlease4 ай бұрын
Sorted, thank you! The wire leading to the broken end was caught around the bottom of the coil so I could not pull it through. I cut a fresh one out of the coil and fittrd that, doesn't seem to have any problems. All the best
@jaylagare4 ай бұрын
Glad it worked out. When I wasn’t able to unwind, I was too scared to cut so I just soldered on an extension 😅
@anythingrc9954 ай бұрын
Hi, awesome video. My screen recently has just died. Can you provide a link to where you purchased the new screen
@jaylagare4 ай бұрын
Thanks! I got it from Shopee. But they’re out of stock. Try AliExpress or Amazon. Just make sure pin order is VCC GND SCL SDA shopee.ph/product/166453397/12715581992 a.aliexpress.com/_oFMUhCI amzn.to/49XqwRT
@aoreliachavez58125 ай бұрын
Es mejor la swiss tech 18 in 1
@landodaquiado40525 ай бұрын
How much tail light cover?
@jaylagare5 ай бұрын
Replacements are available online for P3.5-5K. Originals higher.
@nobertjazeldelrosario98075 ай бұрын
Thank you for this Sir. Salute 🙏🏼🙏🏼🙏🏼👍
@jaylagare5 ай бұрын
You’re welcome! Glad it helped.
@user-fi2hb4ij1i5 ай бұрын
Well, I just fixed my Dremel that's been broken for 6+ years... Amazeballs!!! I own you a beer, Jay!
@jaylagare5 ай бұрын
Glad to be of help. Cheers! 🍻
@user-we2ho9sj6s5 ай бұрын
will this work to lenovo IdeaPad laptop?
@jaylagare5 ай бұрын
If it accepts charging via USB-C then it should work. Many need just at least 65W.