I got you: having fun smashing the windows with the forklift again! 😂😂😂 (honestly, I'd do that, too 😅)
@trucksdoityourself11119 сағат бұрын
@@watchhans haha yea
@watchhansКүн бұрын
You really love to smash car windows, don't you? 😂 Frankly spoken, I do, too 😅
@trucksdoityourself1111Күн бұрын
@@watchhans yes that's my favorite thing to do
@watchhansКүн бұрын
Good to see you guys having fun at work 👍😂
@watchhansКүн бұрын
You really love to smash car windows, don't you? 😂I can still remember when I was a young guy working on a friend's scrapyard. We had a lot of fun smashing and destroying cars before we put them in the crusher 😅 We were really crazy 😂 I envy you working on the scrapyard, having fun smashing cars 😂
@trucksdoityourself1111Күн бұрын
@watchhans yes I think that's the only reason I still work here is a fun job
@watchhansКүн бұрын
@@trucksdoityourself1111 If I had to choose again where to work, it would be on a scrapyard. Hope you will always have a lot of fun destroying cars 😂 and share it with us 👍
@watchhansКүн бұрын
@@trucksdoityourself1111 is it Green's Recycling, Lenoir City, TN ?
@trucksdoityourself11119 сағат бұрын
@@watchhans yes sir and I will thank you for watching
@trucksdoityourself11119 сағат бұрын
@@watchhans yes sir
@watchhansКүн бұрын
When I was a young guy I worked on a friend's scrapyard, and we had fun by trying how long a motor will run without oil 😅 It was really funny 😂
@trucksdoityourself1111Күн бұрын
@watchhans I think we did that 2 and yes it is fun
@watchhansКүн бұрын
It is always good to have some fun at work 😂 When I was a young guy I worked on a friendˋs scrap yard and we did the same 😅
@trucksdoityourself1111Күн бұрын
@@watchhans yes it is
@ณัฐฎ์-ถ3ถ7 күн бұрын
สุดยอด! 👌 ทักทายจาก 🇹🇭
@drewmurray258318 күн бұрын
time for cervezas?
@trucksdoityourself111117 күн бұрын
@@drewmurray2583 yep
@LesaMac201119 күн бұрын
love ur videos, stay safe
@trucksdoityourself111118 күн бұрын
@@LesaMac2011 thanks
@txviking20 күн бұрын
Hi there. I may be in Tennessee again in about a month. Subscriber meetup? :)
@trucksdoityourself111119 күн бұрын
OK sounds good I have some licenses plates finally
@txvikingАй бұрын
Can you save me the license plate off the Cadillac, or is too late? :)
@trucksdoityourself1111Ай бұрын
O man I always forget and yes is going sorry my friend
@txvikingАй бұрын
@@trucksdoityourself1111 I will keep reminding you. 😀
@trucksdoityourself1111Ай бұрын
@@txviking what years are you interested in
@txvikingАй бұрын
@@trucksdoityourself1111 I'm interested in plates in general, but before 2007 especially. (2007 was the year Tennessee moved to flat plates. Before that, they were embossed.)
@trucksdoityourself111129 күн бұрын
@@txviking I don't know what year that was
@LesaMac2011Ай бұрын
Suggestion: maybe try using a fishing wire to take off the badges, maybe turn them into jewelry.
@trucksdoityourself1111Ай бұрын
Jewelry how
@LesaMac201129 күн бұрын
@@trucksdoityourself1111 idk but it would be cool to save the badges
@LesaMac201129 күн бұрын
btw i love ur vids
@trucksdoityourself111129 күн бұрын
@LesaMac2011 very true
@trucksdoityourself111129 күн бұрын
@@LesaMac2011 thanks bro
@MikitoDelValleАй бұрын
this looks like a fun day awsome video bro
@trucksdoityourself1111Ай бұрын
@MikitoDelValle yea it is this job is okay
@J88-kx5uxАй бұрын
Love your videos man
@trucksdoityourself1111Ай бұрын
@@J88-kx5ux thanks bro
@bigmoneylovemonyАй бұрын
Thank you so much for posting this video. I’m gonna try that in my next video.💯
@trucksdoityourself1111Ай бұрын
It actually works i usually put it under my hitch with a jack and that works 2
@bigmatt512mj99Ай бұрын
lol they crazy they could have easily put transmission in that car sell it
@trucksdoityourself1111Ай бұрын
@bigmatt512mj99 yes people just throw good cars away and I'm here with a pos car sad but some of them don't have a title
Have you ever figured out the belt routing? I have same mower but can't figure it out and I have the right belt.
@trucksdoityourself1111Ай бұрын
Yes I did it after buying 3 belts the info should be in the last video
@mybigbackyard741Ай бұрын
@@trucksdoityourself1111 I figured it out few days ago and she’s running great now. I think I didn’t need to replace the drive belt but the coil springy thing that attached to the brake pulley was loose I think that was the reason it didn’t want to move forward or reverse.
@trucksdoityourself1111Ай бұрын
@mybigbackyard741 o okay good to know my friend because my mower does great except whe turn in at full speed I going to check that out soon
@FreddyOropezaGuarenasАй бұрын
Que lastima aún está intacta aquí en Venezuela 🇻🇪 le damos un buen uso ...
@trucksdoityourself1111Ай бұрын
@@FreddyOropezaGuarenas Simon aqui todo lo tiran
@scraptruckdeancincy1057Ай бұрын
Studebaker Lark
@trucksdoityourself1111Ай бұрын
@scraptruckdeancincy1057 okay cool I didn't know that thanks brother
@chuntikyeung7074Ай бұрын
@@trucksdoityourself1111兄弟Thⅰs BENZ GL 450浪费了
@thechriscollection9983Ай бұрын
Yeah mid to late 50s Studabaker with the front and rear clip cut off. Scrap!
@TheLeftybarАй бұрын
Wtf bre, that's a good parts bin truck.
@trucksdoityourself1111Ай бұрын
I know unfortunately i can't save them
@huntergatherer_2 ай бұрын
Any updates?
@trucksdoityourself11112 ай бұрын
Yes I got fix it was the head gasket after that still going strong now
@huntergatherer_2 ай бұрын
@trucksdoityourself1111 uh so you put new head gasket on ? Or did you torque the head studs to spec ? I see in your clip that you said you failed to torque 3 of them to spec which I thought you said you had just put new head gasket on before
@trucksdoityourself11112 ай бұрын
@huntergatherer_ yes I did it but because I didn't torque those head bolts it blew the head gasket so I had to replace it and did right like I should have to begin with it
@bryantidwell2 ай бұрын
Stupid why don't you just sell that buick to someone
@txviking2 ай бұрын
Man, that’s where my missing 10mm socket went!
@trucksdoityourself11112 ай бұрын
@@txviking haha yea
@monarch19573 ай бұрын
I had a 07 Pontiac G6 it was a good car with the 3500 engine.The Northstar engines were junk unfornately on the Cadillacs.
@trucksdoityourself11113 ай бұрын
@monarch1957 3500 are okay engines and yes the Northstar are bad at least for me anyway
@trucksdoityourself11113 ай бұрын
Yes is all done
@migrant84433 ай бұрын
So did you?
@migrant84433 ай бұрын
Nice 👍🏽
@ricks57563 ай бұрын
A set of demolition shears would most likely make your job a lot easier ...
@trucksdoityourself11113 ай бұрын
@ricks5756 for sure
@SundayIkechukwu-sg4tz3 ай бұрын
I need your number okay
@SundayIkechukwu-sg4tz3 ай бұрын
My friend haw are you
@trucksdoityourself1111Ай бұрын
@SundayIkechukwu-sg4tz I'm okay how about your self
@SundayIkechukwu-sg4tzАй бұрын
Ok 👍 good work
@SundayIkechukwu-sg4tz3 ай бұрын
You doing well
@trucksdoityourself11113 ай бұрын
@@SundayIkechukwu-sg4tz thanks my friend
@SundayIkechukwu-sg4tz3 ай бұрын
Hi friend i think I like you work
@alexandermakrianis3 ай бұрын
I used to have a Ford Explorer just like that one here but it was green.
@julmdamaslefttoe35594 ай бұрын
Cheers man, No clue if you will see this, but nice to see someone struggle and get the dodgy bits done on camera, looks Easy to do the wiring, its them damn bolt positions lol. But by god, Subtitle your videos
@trucksdoityourself11114 ай бұрын
Yes is a really head ache and it didn't work out for me so I just did the center locker trick and it works great and yes I need to learn how to subtitles my videos I'll figure out how soon
@julmdamaslefttoe35594 ай бұрын
@@trucksdoityourself1111 whats the centre locker trick can you show me rapid? currently sorting my mates disco 2's 3 amigos to find out after removing it, TO SEE ITS ALREADY BEEN DONE (whats shown in this video) and was a waste of time
@trucksdoityourself11114 ай бұрын
@julmdamaslefttoe3559 I have a video for it just having posted yet I will upload it tomorrow you can check it out what year is your disco
@julmdamaslefttoe35594 ай бұрын
@@trucksdoityourself1111 2003 mate.
@trucksdoityourself11114 ай бұрын
@julmdamaslefttoe3559 okay I'm not sure if yours have the option just have to check I guess I'm about to upload the video now you can check it if you like
@TheArnoldnikolaus4 ай бұрын
Good job. What did you use to clean your block and the heads? Looks pretty clean.....
@trucksdoityourself11114 ай бұрын
Brake cleaner and the blue non scratch scrubber that's wha I use
@trucksdoityourself11114 ай бұрын
And a small brush for some areas
@alfredmartinez11344 ай бұрын
On these trucks you suppose to change your 4x4 in neutral... not park hope this helps
@trucksdoityourself11114 ай бұрын
I already crush her those transmission are junk
@txviking4 ай бұрын
Man, the F-350 had a license plate on it I wanted.
@trucksdoityourself11114 ай бұрын
I'm sorry brother usually don't take them out unless I know someone wants it thanks for watching bro
@txviking4 ай бұрын
@@trucksdoityourself1111 I'm trying to find some of the older Tennessee plates.
@trucksdoityourself11114 ай бұрын
@txviking ok I'll going to start keeping them from now on
@txviking4 ай бұрын
@@trucksdoityourself1111 Thank you!
@trucksdoityourself11114 ай бұрын
@@txviking your welcome
@txviking4 ай бұрын
Quiero hacerlo. :)
@trucksdoityourself11114 ай бұрын
Si fuera mio el business te imvitaba
@AJ-zv9tn5 ай бұрын
Good video bro
@trucksdoityourself11115 ай бұрын
Thanks brother
@J88-kx5ux5 ай бұрын
Love watching cars get crushed. Awesomw channel man.
@trucksdoityourself11115 ай бұрын
Thanks
@johnmyrtle42745 ай бұрын
Y do losers drive front wheel drive piece of shit
@Memphiscultmusic5 ай бұрын
Looks like a busy scrap yard!
@trucksdoityourself11115 ай бұрын
Lately is being really busy
@elianaramirez40515 ай бұрын
🌊
@ابوسارةابوسارة-ز6د6 ай бұрын
عمل ممتاذ❤❤❤❤ 0:13
@art1muz136 ай бұрын
Y porque no vendes cosa en eBay o offer up o Facebook market place? lana, plata.
@trucksdoityourself11116 ай бұрын
El jef3 vende algunas
@art1muz136 ай бұрын
The indigenous people say that the bird is a very good sign for you, brother. Los indígenas dicen que el pájaro es muy buena señal para ti, hermano.
@trucksdoityourself11116 ай бұрын
I hope so I really need it right now
@ابوسارةابوسارة-ز6د6 ай бұрын
❤❤❤❤❤❤ممتاذ ورائع 0:15
@txviking7 ай бұрын
He might have had an easier time with the roof if he had snapped some window supports and peeled it. He eventually does that around 7:40.
@trucksdoityourself11117 ай бұрын
Yea probably we usually don't get busses like that or maybe we need a bigger machine
@txviking7 ай бұрын
@@trucksdoityourself1111 A bigger machine will always make it easier/faster, but that one can do the job. I'm a little envious of the operator. It looks like he had fun!
@trucksdoityourself11117 ай бұрын
Yes it is fun just not fun when is hot the ac doesn't work very good in it and it gets hot in there but after all it is fun crushing cars
@txviking7 ай бұрын
I could have used the license plate off the school bus for my collection. 🙂