Very good video, but at 1:16 he fails to show separating the sprayer that comes down from the unit you freed at the back. Otherwise you will not be able to grab and pull up the part that gives access to the filter. He does show re-attaching the sprayer at 2:44, so this is just an oversight in doing the video.
@silvarajoomuniandy4316Күн бұрын
The problem is with the youths of today who are not concerned about safety. They do not listen.
@QuackingDuck8103 күн бұрын
Such a helpful video with easy to understand steps.Thank you ❤
@SimpleTasks_2 күн бұрын
You’re welcome 😊
@Xbelenncitaaxo6 күн бұрын
How did you remove the screen that catches debris and put it back on it doesn’t show in the video
@faunafarm6 күн бұрын
excellent video! now i just need to order a new filter!
@darkvader567811 күн бұрын
Thank you !!.. simple and to the point... good video
@SimpleTasks_11 күн бұрын
You're welcome! Glad it was helpful!
@vidge12311 күн бұрын
i bought 2 of these traps on ebay. they are AMAZING! no mess and very powerful! the mouse does not get out of them. i ordered 12 more last week from ebay. they average about 2.15 each. very worth it. will never buy the old style again. yes, i use peanut butter. the bait loading is very convenient. use them in the garage and airplane hanger.
@SimpleTasks_11 күн бұрын
That's awesome! Glad they have worked so well for you. We have had a similar experience with these traps!
@vidge12311 күн бұрын
@@SimpleTasks_ i bought 12 of the same ones you reviewed...with the yellow triangle on them. i love them.
@Antsir1212 күн бұрын
I am surprised to see you use the maximum width of the blades given how deep the snow is? I have a similar Toro but I usually go 1/2 to start and maybe 3/4 width if I see it throwing snow cleaning. It is so easy to clog on wet snow by using full blade width.
@SimpleTasks_11 күн бұрын
That’s a great point! Most of the time I’ll use about 3/4 the width, just depends on how the snow reacts!
@Spec_Tac14 күн бұрын
Awesome thank you!
@SimpleTasks_13 күн бұрын
You're welcome!
@kadascreative737624 күн бұрын
Super helpful, thanks!!
@SimpleTasks_24 күн бұрын
Glad it was helpful!
@paj5529Ай бұрын
Inspiring
@AdamSmithsHandАй бұрын
very good video! thanks for the instructions!
@SimpleTasks_Ай бұрын
Glad it was helpful!
@dianemoye6844Ай бұрын
I do this then take an old tooth brush and scrub it a bit.
@SimpleTasks_Ай бұрын
That’s a great tip! Thanks!
@Thomas-yr9ln2 ай бұрын
Mine wasn't working and just out of dumb luck I unplugged it just because my cord wouldn't reach and it started working. It was nothing but dumb luck.
@HailAnts2 ай бұрын
That Apple logo progresses bar may not be the last thing. It often will go dark, and then appear again. This is normal. Also, it's not a bad idea to turn your Auto-Lock to never so that you can always see the progress of the update. Don't forget to turn Auto-Lock back to your regular setting after the update.
@SimpleTasks_2 ай бұрын
Great info! Thank you!
@scottdunn45062 ай бұрын
I didn’t know people didn’t know how to start a lawnmower lol 😂
@woojongson54312 ай бұрын
I love you.
@jackcoleman59552 ай бұрын
Thanks!
@SimpleTasks_2 ай бұрын
You bet!
@jayfiverridesusa2 ай бұрын
Will it still work if you’re left handed?
@kadascreative73762 ай бұрын
I have that exact bike! Thanks for the tutorial
@kadascreative73762 ай бұрын
Very straightforward with no unnecessary content! Thank you!!
@SimpleTasks_2 ай бұрын
Glad it was helpful!
@kadascreative73762 ай бұрын
Thank you!! Mine has been bothering me lol
@SimpleTasks_2 ай бұрын
Glad we were able to help!
@Guy837532 ай бұрын
Ok
@recruits18203 ай бұрын
Sarge?
@okiemarket3 ай бұрын
Please, explain what is done with the yarn tail after you pull the circle closed. Thanks.
@SimpleTasks_3 ай бұрын
@@okiemarket Most often projects with magic rings are stuffed animals or other 3D objects. To which the tail can be stuffed inside the project. If your project is not a 3D object, we recommend tying the tail in a knot and cutting the excess.
@christisrisen67743 ай бұрын
Literally just got brand new wifi from Comcast a month ago and I keep getting buffering and blurry pictures a month later. This definitely should not be happening please do you have any suggestions as to what is the problem? I'd sincerely appreciate it.
@SimpleTasks_3 ай бұрын
There could be several reasons why your Xfinity WiFi is slow and buffering. Here are some common issues and solutions to consider: 1. Router Placement: Ensure your router is placed in a central, open location in your home. Avoid placing it near walls, metal surfaces, or electronic devices that can interfere with the signal 2. Network Congestion: If multiple devices are using the internet simultaneously, it can slow down your connection. Try disconnecting devices that aren’t in use or schedule high-bandwidth activities during off-peak hours 3. Interference: Other electronic devices, like microwaves and cordless phones, can interfere with your WiFi signal. Keep your router away from such devices 4. WiFi Boosters: If you have a large home, consider using WiFi extenders or mesh networks to improve coverage 5. Check for Outages: Sometimes, the issue might be with Xfinity’s service. Check the Xfinity Status Center for any reported outages in your area 6. Ethernet Connection: For stationary devices like desktops or smart TVs, using an Ethernet cable can provide a more stable connection You can also use the Xfinity app to run a full network test, which can help identify and troubleshoot connectivity issues If these steps don’t resolve the issue, it might be helpful to contact Xfinity support for further assistance.
@inazumaElevenFanAHH54474 ай бұрын
thanks!
@makaicuhh4 ай бұрын
My modem doesn’t received the internet connection and the online light doesn’t blink but when I connect to the internet it’s not working
@SimpleTasks_4 ай бұрын
It could be an Xfinity internet outage, here is a link to their outage map www.xfinity.com/support/statusmap If the issue persists we recommend contacting Xfinity.
@kadascreative73765 ай бұрын
Just tried this method- it was so good! Thank you!
@Sanjay19.1.145 ай бұрын
Your videos are so helpful. Continue doing things like this.
@SimpleTasks_5 ай бұрын
Thank you! Will do!
@Sanjay19.1.145 ай бұрын
Thanks for the instuctions. I don't know that i have to pick the strings every second to tune. And this app is amazing🎉 Thank you😊
@SimpleTasks_5 ай бұрын
Happy to help!
@bonniehopeful5 ай бұрын
Why dose This KZbinr not have 100K subs?
@racquelltait18046 ай бұрын
Missing my cap and button to release. Can anyone help me with directions on what exactly to do with that butter knife when this happens? Thanks
@John-wr6yo6 ай бұрын
Bleach and joy mixed together will raise the dead,cure syphilis,and herpes ,clean anything known to man,and clear the cloggs.
@L0REN116 ай бұрын
Thank you for help.
@CarlBridgeforth6 ай бұрын
You didn't do no mono. Backing
@e20306 ай бұрын
Lol...The IT Crowd
@SarabGhuman-w6v6 ай бұрын
Me
@kibailey66887 ай бұрын
My light hasn't come back on 😢
@gunput697 ай бұрын
That looks proper❤,I use vinegar and my tunes r fine after 30 years
@rechanted12917 ай бұрын
I har no internet so i couldnt use this video and i somehiw fixed it myself lol
@marionthornberry27967 ай бұрын
On a older model
@kuldeepbachhav15907 ай бұрын
Could you lend me some games for the switch?
@kadascreative73767 ай бұрын
Straight to the point and helpful! Thank you!!
@myahraby79819 ай бұрын
It has taken me so long to find this information. I have an older fridge and it has taken me a ridiculous amount of time to figure this out. I was even reading a digital manual to try and solve my problem. I know this video is 7 years old, but you’re still helping people in 2024. THANK YOU.
@scottwood3313911 ай бұрын
Wow this worked for me, 5 years after your video. Thanx
@phi1166 Жыл бұрын
Do you have issues with water leaking after changing filter? I recently had this issue after changing filter
@dalee.goodwin3913 Жыл бұрын
I have that particular internet provider btw 0:05
@Chezboi30003 Жыл бұрын
I followed your example and my lights turned on but then they turned off after about 6 seconds. Any advice?