Bro i did this but it just loosen back should i change the bolt on it pls reply?
@DrCrankysBikesforKids5 сағат бұрын
I would try loosening the bolt completely and greasing the threads then refitting and tightening.
@HexerTooDumb3 сағат бұрын
@@DrCrankysBikesforKids Your a W made this 3 years ago and answered me today thx
@ArfanAhmad-ux1zf2 күн бұрын
Thank u
@NatiHagos-m1x10 күн бұрын
Thanks it works
@DrCrankysBikesforKids10 күн бұрын
Glad it helped
@DrCrankysBikesforKids10 күн бұрын
Cheers. Happy riding.
@vishmehra523216 күн бұрын
A big help thnku
@DonnaKirkwood20 күн бұрын
L this did no do shit
@charmarichshow171424 күн бұрын
Thank you. I built my bike and never knew how to check it and then fix. I appreciate your help.
@user-er7fp9lc6h25 күн бұрын
How do you deflate a tire that's the valve cannot be moved at all
@TheGrossDemon29 күн бұрын
But what do I do if the bolt is completely tight and the handlebars still turn?!?!
@seanadams8504Ай бұрын
Hi I have had a bike of my mate and the tire was low..so I put 40 psi (20 in wheels) and hours later the inner tube blew out. I have since replaced it with a new tube and this one has split where the valve is glued. What's the reason for this as I've been working on my bike for years on and off ? Thanks
@DrCrankysBikesforKids29 күн бұрын
I would check that you've got the right valve for the rim (don't put a presta in a schrader valve as it could split on the rim edge hole). Then check the tyre for splits or glass/wire. And then make sure the rim tape is intact so there are not sharp edges including on the inside of the rim wall. Good luck.
@ericfeng8246Ай бұрын
Great video, just what I need. I was about to give up and buy a new inner tube.
@DrCrankysBikesforKidsАй бұрын
Glad it helped1
@mizzlowkey11Ай бұрын
How to take the breaks offfffc?
@DrCrankysBikesforKidsАй бұрын
Here: kzbin.info/www/bejne/bZnRd2eoi716f9E
@paradigm_shiftАй бұрын
This helped tightening the damn thing. I was going Crazy! Thank-you! 🙏
@DrCrankysBikesforKidsАй бұрын
Glad it helped!
@smithapeter4762Ай бұрын
What is that thing called which he is holding in his hands
@thoughtbus6930Ай бұрын
You saved me 150 bucks I love you 🙏🫡
@gwendaniels5611Ай бұрын
Great! Fixed my bike today. Thanks
@DrCrankysBikesforKidsАй бұрын
No problems
@owojoririchard48022 ай бұрын
I just got my new bike and i had thus issue, it is of a great use thank you ❤
@dicksmell35002 ай бұрын
Thanks
@marianaibelitcariciu59062 ай бұрын
shii thanks a lot man
@Alexgomez4112 ай бұрын
Im 3 inner tubes in now the 4th one just boomed on me on a ride wtf......i made extra sure to seat the dam thing with a new tire i think the rim is bent or bad (in my case) and the worst is it caboomed in front of everyone in the park
@DrCrankysBikesforKids2 ай бұрын
Sounds like the rim. Sometimes the tyre can be slightly too big so it won't seat properly. Or the rim is damaged or slightly small. Seems most likely you have a problem with the rim.
@Alexgomez4112 ай бұрын
@@DrCrankysBikesforKids I'm going to glue that s.o.b on there lol
@martyjoseph95072 ай бұрын
Hoping I can fix mine. After 20 years I decided to finally raise the stem as much as possible but found it stuck after loosening the bolt, so I tapped with a hammer and raised it, and have a good snug. About 40 miles later it came loose so I really tightened it, only to have it basically fall out. Looks like a lot of rust and a cracked tip on the stem. I'm hoping a good cleaning and maybe a file will allow it to move as needed to bite again
@DrCrankysBikesforKids2 ай бұрын
I'd suggest getting a new stem bolt assembly from your local bike shop. Not expensive and will be reliable.
@AnonymooseWasMyName3 ай бұрын
Thank you so much, you just saved us from sending stuff back thinking it must be broken!!!!
@DrCrankysBikesforKids3 ай бұрын
glad it helped.
@NANKEL13 ай бұрын
You just proved my wife right, and now I'll never hear the end of it. hahaha
@user-xk1ok7xg8m4 ай бұрын
It has, hasn't it? You are right! I have been trying to air it up with a mattress pump. I am in middle of nowhere. I could have sworn that I got air in the other tire. I pushed it in while applying so much pressure. I have rolled it around in side also. Hey, I'm 57. I had a husband for 30 years. He was a Marine older than me. He did those things. My, grown, son is in the area I left. I'll be back to let u know. No hardware store here. Amish area. I don't know anyone. I have 3 bicycle pumps at my homestead. I forgot them. I will make sure I get next week. Ty
@fritzcampo23474 ай бұрын
Thank you, it helped a lot ❤❤❤
@Rezilete4 ай бұрын
Just today was commuting and then boom I go flying off my bike and break my kneecap. 🤣
@LanxPenzenpepper5 ай бұрын
I just don't understand why they can't just make a valve that has a locking screw to prevent it from sinking 😂
@schwarzesonne65295 ай бұрын
Any advice on how to fix a seat that is always slanted upwards like its watching for the return of jesus from the sky at any moment
@DrCrankysBikesforKids5 ай бұрын
Try this one kzbin.info/www/bejne/d4azg6aDerOXp8ksi=JihRo7uh1hLVE8X3
@brendamiller84566 ай бұрын
It's Dr. Steve Brule. Check this out.
@ProudWhiteBoy6 ай бұрын
Its loud asf to when it blows
@moynulislam95596 ай бұрын
Solve my problem. Thanks ❤❤❤
@DrCrankysBikesforKids6 ай бұрын
Glad it was of help.
@zacbramante166 ай бұрын
Exactly the video I needed. Thanks.
@DrCrankysBikesforKids6 ай бұрын
Glad it helped.
@matthewthomas67576 ай бұрын
Thanks u helped me much more than I could on my own 👍
@jodiesilver7588 ай бұрын
I tryed to pump my tire up and it was down but I'm seeing why it going down after coving my tire whole
@brazilianfernie8 ай бұрын
How about when your handlebars are tight but the wheel still moves side to side?
@DrCrankysBikesforKids8 ай бұрын
Good question. That could be the axle of the wheel (tighten the bearings) is loose or the wheel nuts are loose (tighten the nuts). On suspension forks it is sometimes the play in the fork, especially cheaper or older ones.
@ZeanGpascual-qp2iy8 ай бұрын
Hindi naman po gumana
@user-bv4ql8xx7e9 ай бұрын
What tool is it?
@DrCrankysBikesforKids9 ай бұрын
6mm allen key
@flegisto9 ай бұрын
Answered my question. Thanks.
@DrCrankysBikesforKids9 ай бұрын
Cheers
@freeassange51519 ай бұрын
They are the most pointless invention ever.
@DrCrankysBikesforKids9 ай бұрын
not the most pointless i'd say
@cinder39 ай бұрын
Mines like the 2nd bike but still won't tighten. What could it be
@DrCrankysBikesforKids9 ай бұрын
Sometimes you have to take the whole stem out and put grease on the threads so they can tighten properly. I have another video that shows the process. kzbin.info/www/bejne/pqqlaGyMZcubmpI at about 2:18.
@demonedebobowen96519 ай бұрын
Niice you’re the man!! thank you 🎉
@fwfefrtefdv47199 ай бұрын
Thanks for your video! How about the other head type valve?
@DrCrankysBikesforKids9 ай бұрын
Answer might be here: kzbin.info/www/bejne/aZbdnmaclpl_g9k
@ericathorn12989 ай бұрын
You rock got it done.. thanks🎉🎉🎉
@DrCrankysBikesforKids9 ай бұрын
yeeha!
@Jebriel_produces10 ай бұрын
This was the only thing that I was missing made my life easier I'll use this method next time
@bartsbeghen214210 ай бұрын
Glad it helped🙂
@ajeetrajdevkaur728310 ай бұрын
Thank you!!
@shinobibliss734510 ай бұрын
This helped a lot. I was literally about to saw it off
@bartsbeghen214210 ай бұрын
Whew!
@fidotido633910 ай бұрын
But my handle keep on moving although i have tighten the screw
@CAN18240310 ай бұрын
Very helpful Thank you 😊
@zoehancock11 ай бұрын
Thank you. Have been trying to find out just this for ages-have found out how to both disassemble and reassemble headsets off various kinds but not simply how to sort this issue. Thank you.
@bartsbeghen214211 ай бұрын
Cheers ZoeH
@starlightx666211 ай бұрын
Thanks!! I did it!!! 👍🏾👍🏾👍🏾 So proud of me!! Lol 😂
@DrCrankysBikesforKids11 ай бұрын
Good job!
@ValFolarin11 ай бұрын
This is all too hard for me. I just want to sit at home and eat ice cream