Should have put runber membrane so metal doesn't contact concrete. Seal outside edges silicon. Metal wont rust as fast with rubber ay the concrete
@maryestheraustin25052 күн бұрын
I just bought one new in a box. I have the .95 Echo 8 side. My question is what do they mean by fresh fuel, any suggestions for labeling fuel so they don't get mixed up? can I use the unleaded I use for the lawnmower with the additive provided for the 250cc?
@po55862 күн бұрын
I sure appreciate this video. Came with zero instructions. I wouldn’t have had a clue where springs go or that block piece or anything. Thank you!
@LVMMMAAA432 күн бұрын
Wheres tankay
@LVMMMAAA432 күн бұрын
Tanks was very much help for sure aha 🙏🏽
@howardiko71568 күн бұрын
A foundation moisture barrier should have been put down first. There is a foam type for wet area that might work after the fact.
@jmo8a_veda8 күн бұрын
This is cool video its interesting because I want a steel home some day and have hold ups about costs its emotional and gotta stay strong.
@BigMex6410 күн бұрын
Your slab should be same height or higher than your exterior sidewalk
@Buzz_Kill7110 күн бұрын
simple video. thanks. I don't see the proof that it worked though? The key-way for this part is right shifted compared to mine....
@ronthemogul10 күн бұрын
How’s it holding up?
@JeffStokerCFM11 күн бұрын
Raid looks like it makes the insects think they're coming to a rave party. 😂😂😂
@MyLooneyBin10 күн бұрын
Yea. The work okay. Not sure if there is a negative effect of all the blue light? But they definitely help
@AngelGuzman-ij7pl12 күн бұрын
So that fixed the issue I thought it was the shift solenoid that caused that problem
@MyLooneyBin10 күн бұрын
New ECU fixed my issues
@damionrichter12 күн бұрын
my car had 3 transmissions in it at 100k i think ecus bad
@MyLooneyBin10 күн бұрын
Interesting? Hmmm. That blinking D4 was fixed by new ECU in my car
@damionrichter10 күн бұрын
@@MyLooneyBin yea thank you did it not shift too
@erikd157714 күн бұрын
Question prior to you replacing with the kit was the D and R blinking on and off inside the Cabin on the electronic dash? Mine does and feels like it in limp mode but shifts and reverses I don’t think it’s going past first gear but the letters blink and blink and sometimes it will stop blinking and pretend to act normal 🤦🏻♂️ Suggestions anyone? Mines a 2010
@MyLooneyBin10 күн бұрын
I did not have that issue. I haven't experienced limp mode
@dav391716 күн бұрын
My friend has one..great car , smooth ride and very reliable..hidden gem..
@dannyballew582216 күн бұрын
@@dav3917 I'm scoring mine with new tires for 800$ good title
@MyLooneyBin10 күн бұрын
Great deal. I pretty sure I bought mine at peak price! 🤣
@MyLooneyBin10 күн бұрын
Super smooth and comfortable
@dav39179 күн бұрын
@dannyballew5822 great deal ..u all set to go.. any ideas on anti-fog on side mirrors? My buddy doesn't have the heated mirrors..
@AllFunniesandGames19 күн бұрын
Great video!
@nathancadena686721 күн бұрын
Did you have problems with the car acting like it is in neutral when you put it in drive?
@MyLooneyBin21 күн бұрын
I didn't, but I had two sensors that were fine. If you saw later in the video where I replaced those switch pieces, only one was really bad. So it may just depend on which one is bad for you. If it works sometimes and sometimes it doesn't then it is probably the same problem I have. If it's the transmission "slipping" then you may have a different problem
@shannonchase562421 күн бұрын
Thank you sir for your video. I was able to fix my mother in law’s truck and get her back on the road safely 🙌🏾
@RearviewMirror-ij2pr22 күн бұрын
it's an erector set.
@debbiep9923 күн бұрын
For laying the freezer on the side you need to lay it on the right side. There is a video on KZbin that shows you what side to set it on so you literally only have to wait 10 minutes before plugging it in.
@RICKHATCHER-c7s23 күн бұрын
WT5500
@RICKHATCHER-c7s23 күн бұрын
How do you program a WT five 500 wireless keypad to a 1864 power series panel?
@TexasKen25 күн бұрын
Should've done a drip edge
@pr54927 күн бұрын
Did you get any error codes or warning messages because of changing the type of bulb to the LED? Or did everything work just fine with no error messages?
@MyLooneyBin26 күн бұрын
Everything worked great. (I even extended my leads while I was in there). Had no issues and the lights are great. My son in law ordered a set as well and he loves them. Great customer service. If you have any issues, just email them and they resoyit immediately!
@mrchad97z4927 күн бұрын
I have a sway bar link mounted to a Hole in a Lower Control Arm on a Acura TL. I want make the hole slightly larger to accomodate the new larger swaybar link bolt. The LCA metal is probably 3/8" thick?. I am guessing it is cast steel. Will these bits work? The hole needs to be enlarged about 2 mm. thanks this is what it looks like. you have to stop the video and look at the Bottom end of that stabilizer Link. That is wher it attached to the LCA kzbin.info/www/bejne/eJnQl2CedpiIr9U
@MyLooneyBin26 күн бұрын
I am not sure the Harbor freight one will work, but one should. You will have to worry about how deep and possibly drill from both sides. If you go past the step, you will definitely have an issue. I would use a micrometer to ensure it is exact. But a good step bit and drill will shave anything down. A machine shop would be your best bet though, they can make it perfect. Legal Notice! 😂. Please follow all manufacturers recommendations and do not use my advice for anything.
@ezequielvilla9984Ай бұрын
😎👍
@MyLooneyBin26 күн бұрын
Hope it helped man!
@TeddyJSmoothАй бұрын
How long does it take to get a full charge.
@neilgettig2877Ай бұрын
I bought one and it works great! But it cost $300 on Amazon.
@ImurgeАй бұрын
🛠 ✨ ✨ ✨
@daveblackstock5167Ай бұрын
Complete waste of money mine never worked right Straight Out of the Box brand new
@MyLooneyBinАй бұрын
Wow, mine still works. Year after year. Starts up perfectly. One of the best gasoline motors I've ever owned.
@aphroditegonzalez1646Ай бұрын
The button the red button how should it be
@MyLooneyBinАй бұрын
Balloony! If it doesn't spring back it is a problem. It is a common problem where you have to change out the "priming bulb" amzn.to/3VDY5De If you aren't hearing/seeing the gas being primed when you push that, you may have an air leak. The bulb may be cracked.
@MyLooneyBinАй бұрын
amzn.to/3VDY5De That is the priming bulb. If it is old or cracking, check that link I added. You will need to have that replaced. When you press it, you should hear/feel/see gas movement.
@robertburnos7573Ай бұрын
Junk ...apple cider vinegar and dish soap will do the same
@mikejordan3598Ай бұрын
Thank you buddy
@tonybaker3024Ай бұрын
put your earth clamp where it does not get in the way and wet rag around the swivel eye.
@MyLooneyBinАй бұрын
Thank you. For some reason welding has been extremely difficult for me to pick up. I have to watch a few more videos and get some more instruction but I don't know too many welders
@AllFunniesandGamesАй бұрын
Great video!
@michaelpaeschke168Ай бұрын
Use shampoo to remove gas smell from.your hands
@manuelsalgado8510Ай бұрын
So let me get this straight… you filled up your entire tank with injector cleaner? And what type of cleaner did you use? I’m having some issues with my 2011 Honda Accord.
@MyLooneyBinАй бұрын
No, just one bottle per tank of gas! BUT if it is running rough, I would first change the spark plugs. And use the recommended plugs on this one, don't go cheap. If that doesn't work maybe new coil packs. You can try the fuel cleaner first though. It's the cheapest and easiest option
@2jzgenatАй бұрын
Installed my new carb and still no start :/ just cranks. I have compression and spark too
@MyLooneyBinАй бұрын
This would tell me you have an issue with the supply of gas. It may not be related to your carburetor. It may be your fuel filter or your fuel line. So double check those and make sure you got a clear path. It's just those two plastic hoses coming from the fuel tank to the carburetor and that fuel filter
@2jzgenatАй бұрын
@@MyLooneyBin i understand that my carb kit included new fuel lines and filter which i installed all new. Plus i unhooked fuel lines and theres flow going all the way to carb. Also it only turns on with choke off (valve opened), but rpm climbs so high that i turn off to avoid damage
@elihalloran_13192 күн бұрын
@@2jzgenat i am having the same ezact problem. i just bought a new bike and its a pos, my throttle cable is too short
@jc525excАй бұрын
Did you put brake grease on the pad surface that touches the rotor? Sure looked like it. We both know it goes on back of the pads not part that creates friction on rotor.
@vonnieboy7878Ай бұрын
I was thinking the samething 👀
@lonnymcgee1762Ай бұрын
Thank you for this video. I have a 2014 Cadillac SRX that is downshifting hard into first. I thought that it might be a full replacement of yhe transmission, but because of your video, I've come to believe that the problem is in the solenoid vacuum plastic thingies you replaced in yours. I haven't takin it apart yet, waiting on those parts from Amazon to arrive. I'll tear into it this weekend to be sure. I'm almost 100% sure its those pieces you replaced. And watching your video shows me the right way to do it. Again, thank you so much from one Cadillac owner to another. Ill post an update when done.
@MyLooneyBinАй бұрын
Man, I hope so! Would be awesome if it is. Good luck, and definitely let us know!
@aroundtheyardfunАй бұрын
OK, so I just bought this carburetor that you have on here, and I’m planning to put it on my homemade engine, instead of having it vacuum fed, can I have gravity, fed by the fuel tank above the carburetor? Thank you!
@martin9502Ай бұрын
No check engine light cuz you disconnected the battery, my experience was the shift solenoid right in front on the transmission
@AllFunniesandGamesАй бұрын
Great video!
@ChristinaCox-lt8mbАй бұрын
I purchased 2 and assembled them today, as a woman, by myself. It took maybe 15 minutes each. It recommends 2 people to attach the Lid. It doesn’t require 2. I’m very pleased.
@MyLooneyBinАй бұрын
That's awesome! Yes you can get it done alone, but always nice to have another pair of hands. You won't be disappointed, these are great boxes!
@lur3950Ай бұрын
HELLO, great video! Nice dutiful helper. What size socket did you use?
@eddysevilla9648Ай бұрын
I bet you the sound better without the plastic on the back more air movement 🔈🔉🔊
@MyLooneyBinАй бұрын
Yea, definitely opens up the installation options. Sometimes that pressure helps on some tones. But overall, couldn't tell a huge difference
@dnjneville1Ай бұрын
I don't have 2 channels. I only have 1.
@MyLooneyBinАй бұрын
If you have this model you should have 2. If you don't, that is okay. Several trimmers only have 1 channel.
@bryanlee5390Ай бұрын
nice video, clear and simple. btw, do you need to reset or reprogram the srx after replacing with a new battery?
@MyLooneyBinАй бұрын
When you start the car it will have you roll down the windows one at a time, but it tells you what to do.