Пікірлер
@Mischu7231 Ай бұрын
Hallo ich finde den Raise3d Pro3 immer noch ein tolles Gerät, aber ich habe mit der Kalibrierung meine Schwierigkeiten. Wäre toll wenn Du mal das in einem Video zeigen könntest. Denn wenn ich das mache wie es bei Raise3d auf der Seite ist, stimmt der 1 Layer einfach nicht. Die Kalibrierung wird mit PLA Premium wie es empfohlen wird gemacht. Im Netz ist für den Raise3D Pro3 sehr wenig zu finden. Danke und Grüsse aus der Schweiz
@attilama 3 ай бұрын
Finde den Drucker sehr gut, aber leider auch sehr teuer.
@lucypoulailler2320 4 ай бұрын
please could u tell the cost of this printer
@SpangeBatta 5 ай бұрын
Still love the Ultimaker! Always works, print quality is still really good after a few years, really accurate, only thing is waiting time! Love the carbon and glas filled materials
@AndyBarrero-w6k 7 ай бұрын
Is there a source to purchase MTplus in the US? haven't found any german sites that ship to the US. thanks.
@alexandershinkarenko3725 9 ай бұрын
Nice comparison! Thanks a lot
@tschaps5087 9 ай бұрын
Very good review
@petrutm 9 ай бұрын
Have you tried to select Raise3D E2 instead?
@TamLe-si7wm 10 ай бұрын
do we need calibration everytime we take the object after printing?
@Finn-wy8fh Жыл бұрын
Was nutzt mir das Wissen darüber jetzt? Muss ich mit dieser Toleranz konstruieren, wenn ich Teile drucken möchte die ineinander passen? Angenommen es passt bei 10,1 mm am besten, dann weiß ich doch noch immer nicht, ob mein Loch größer gedruckt werden muss, oder ob die Toleranz bei dem passenden Stück nicht zu groß ist. Wenn der Drucker eine Toleranz hat, dann müsste er diese doch sowohl beim Loch, wie auch beim Teil welches in das Loch soll, haben. Hoffe meine Frage ist nachvollziehbar ;D
@jopower1 11 ай бұрын
Ich bringe meinen Studenten bei, gleich im CAD Bauteile mit Spaltmaßen zu bauen. Bei einem Loch mit 3mm Durchmesser sollten im CAD 3,3mm konstruiert werden, bei 8mm sind wir bei 8,5mm und bei größeren Maßen brauchen wir um die 0,7 oder 0,8mm Zugabe. Somit lassen sich auf jeden Fall Bauteile ineinander stecken, die nicht klemmen sollen. Selten wird aber ein Loch 90 Grad zum Druckbett gedruckt, wie hier im Video. Liegt ein Loch 30-60 Grad schräg, ändert sich alles. Im Video hätte erwähnt werden müssen, dass ein Kreis immer aus vielen Punkten mit Geraden besteht. Hinzu kommt noch der sich ausdehnende Kunststoff beim Auftrag. Allein das macht das Loch kleiner. Die Toleranz des Druckers macht eigentlich nie Probleme.
@boris3905 Жыл бұрын
Warum braucht man zwei Hotends, wenn ich Teile nur mit einem Extruder drucke?
@fahadahmed7437 Жыл бұрын
hello there first thank you for that review can you tell if its einscan SE V1 OR V2 BECAUSE i want to buy BUT am worried about the performance of the software that comes with einscan SE v1(blue background) furthermore, can we use that EX SCAN (black background) software with einscan SE V1 ??? thank you in advance.
@Mophonic Жыл бұрын
I cant save nor export my Scan. I dont know how to finish a scan, there is no "IM DONE" Button, the save button is not clickable- cant do this, cant do that. any ideas ?
@Mophonic Жыл бұрын
and I cant delete things from the model although i clicked on the lasso- but it does zero.
@Rocketkid2121 Жыл бұрын
Seems like it loses tracking way too much. I have one and the hybrid alignment doesn't work great, it even struggles to find markers in that setting. Any tips? It's fairly frustrating for such an expensive scanner.
@Ebse135 Жыл бұрын
Wo gibt's die platte die MP plus platte und was kostet sowas.
@ethan073 Жыл бұрын
Did you live in the USA for a long time? Your American English is near flawless. I was halfway through the video before I realized you were German! 😆
@madelynnrodney4868 Жыл бұрын
*PromoSM*
@007bobbyc Жыл бұрын
Hallo, gibt es Erfahrungen mit extrudr Greentec PRO bei dem Drucker?
@AMAcademyBayreuth Жыл бұрын
Ja das läuft sehr gut. 210-220 Grad.
@MW-jm8qb Жыл бұрын
Great video. Very informative, thorough, easy to listening, non-rushed, nice cadence. 10/10.
@joukolehtomaki Жыл бұрын
@11:35 Z-axis calibration. I guess the probe (Pro3) has no idea where the nozzle tip is, so I can't understand why the probe would make it any easier to calibrate Z clearance? The probe only knows the clearance between the probe and the bed, not between the nozzle tip and the bed.
@ДмитрийГончаренко-с2ш Жыл бұрын
Thank you!!!
@Evil_Clown_3DIY Жыл бұрын
Schade, gerade der Teil mit der Konstruktion hätte mich interessiert. Speziell um ein gescanntes Körperteil.
@bupbup777 Жыл бұрын
Nice, keep it up. Just what I was looking for. Also saved for future review
@sitecraft_ro Жыл бұрын
A very very bad way to use this printer. Sun is not blocked, you use hard tools to clean the FEP, Alcohol not covered. Base of the printing platform just confirms the way you use it. Not recommended.
@erospangolit1338 Жыл бұрын
Does anything happen if I scratch the heating block? I think my mouthpiece already needs a change since I can see that it has changed its yellow color to a pink color. Do you recommend the change now? It's only been about 4 months but I've been having problems and I was taking it out constantly I also have a PLA filament leak
@25lakhan Жыл бұрын
superb explanation sir. thank you so much.
@chrisr1241 Жыл бұрын
Muss sagen die Platte ist nur mittelmäßig gut. PLA geht seht gut, ABS auch. Petg dagegen nicht wirklich. Es hält nicht zu gut, sondern zu wenig. Habe Temperaturen getestet und mehrere PETG ohne Kleber geht da nix. Nylon ist ähnlich schlecht. Der PA Kleber von Magigoo geht auch nur mittelmäßig. PVA Kleber auch nicht wirklich gut. Der Kleber von VisionMiner dagegen ist wirklich ein Traum. Damit geht eigentlich alles... Mit dem Kleber ist aber auch egal welche Platte. PEI, G10... alles gut...
@josefbestman6109 Жыл бұрын
kann das Display auch auf deutsch?
@AMAcademyBayreuth Жыл бұрын
Ja, man kann die Sprache einstellen.
@Autocad1bb Жыл бұрын
please do a comparison between Raise 3D E2 and Pro3 if possible
@ericmccann2845 Жыл бұрын
Can it scan a whole sized car?
@AMAcademyBayreuth Жыл бұрын
It could. Be sure to set the resolution accordingly, you don't need 0.25mm resolution for a car :D
@ericmccann2845 Жыл бұрын
@@AMAcademyBayreuth No, but I've yet to see a full scan. That's what I'm looking at.
@ericmccann2845 Жыл бұрын
@@AMAcademyBayreuth Volumetric Accuracy vs Single Point Accuracy
@AMAcademyBayreuth Жыл бұрын
@@ericmccann2845 kzbin.info/www/bejne/aaHWenSgn7d4qtU Have a look at this video. Took me 1 minute of searching ;) I'm sure there's a lot more out there that can give you a better idea.
@rizgems8344 Жыл бұрын
Your video is really helpful. Thanks
@DavidAdam-c7w Жыл бұрын
you should compare same object for both scanners
@AMAcademyBayreuth Жыл бұрын
I did scan the fan thingy with the H as well, before starting with the HX. But it's weakness was very quickly apparent so I didn't keep going. The video was long enough already.
@chrisr1241 Жыл бұрын
Super, aber man sieht aber auch bei dir zwei Luftbasen =) 4:42
@paulmueller18 Жыл бұрын
Hallo Eure Videos finde ich immer informativ. Ich wäre froh ich hätte das gesehen bevor ich meinen E2 zugunsten des E2CF verkauft habe. Das geschlossene System damit nicht irgendein "Dreck" verdruckt wird ist soweit nicht schlecht ABER warum nimmt Raise nicht auch die PLA und PETG Filamente mit auf ? Diese würden den Drucker ja nicht mehr sonden eher weniger beanspruchen als das faserverstärkte Material. Ich finde das so nicht in Ordnung. Zu den tollen Koffern sei noch folgendes gesagt: Stückpreis 1000€, keine Anzeige über die Feuchtigkeit im Inneren - also wann das Trockenmittel wechseln ? Kein Sichtfenster um zu sehen wie viel noch auf der Rolle ist ? also da hat jemand nicht zu Ende gedacht. Ich benutze die Trockenbox von Polymaker. Da sehe ich wieviel Filament noch auf der Rolle ist und auch wie die Feuchtigkeit ist und es passen 2 Rollen rein. Also dann lieber 15 Polyboxen für den Preis eines Raise Koffers. Was die Druckqualität angeht ist er genau so toll wie mein E2 zuvor und fast so gut wie mein Pro 3. Wenn jetzt noch die Möglichkeit dazu käme normale Markenfilamente zu drucken würde das seine Attraktivität deutlich steigern.
@froggymountain Жыл бұрын
what is print width (how thin a section can it print), how small a hole can it print? what is smallest layer thickness?
@AMAcademyBayreuth Жыл бұрын
Print width and smallest hole both depend on your nozzle and slicing settings. If you use a 0.4mm nozzle and set the extrusion width to 0.4mm, the thinnest wall will be 0.4mm. As for smallest layer thickness, it allows you to set it all the way down to 0.05mm, but then the print is so slow it's unbearable. I would recommend keeping layer height between 0.1mm for fine printing and 0.3mm for rougher (but faster) prints.
@froggymountain Жыл бұрын
@@AMAcademyBayreuth Does Ultimaker S5 or S7 print with a 0.2mm nozzle. In that case can it print a .75mm wall (multiple passes) with a 0.5 mm radius on the top?
@AMAcademyBayreuth Жыл бұрын
@@froggymountain It should generally be able to. You can always send the part to a service provider that uses the printer you want and have them print it for you. That way you can check whether it can do what you want without having to buy the printer.
@stalawina Жыл бұрын
Thank you so much! I was about to buy this printer instead of the standard E2 as I print a lot of CF Nylon. But my main filament is Taulman 910. It would have been a big disappointment. Thanks again!!!
@kaissel2290 Жыл бұрын
Vielen Dank für das tolle Webinar, sagt mal, wenn ich zB ein Objekt 4 mal platziere und es löst sich während dem Drucken eines, kann ich den Drucker dann noch beeinflussen, dass er das ab jetzt auslässt und die anderen fertig druckt?
@AMAcademyBayreuth Жыл бұрын
Nein, leider nicht.
@TimeTravele9876 Жыл бұрын
Thanks for the Video! What resolution will the scanned texture be?
@AMAcademyBayreuth Жыл бұрын
That depends on your selection! The SE can scan up to 0.1mm Resolution, as far as I can remember. Check the video for my selection here.
@davidmeyers838 Жыл бұрын
you have the software images backwards.
@Jeff-ni6kh Жыл бұрын
I'm looking to print small gaming figures & jewelry. I want to avoid Resin, for safety reasons. Will The Raise 3D Pro3 work for this?
@AMAcademyBayreuth Жыл бұрын
Resin will still be superior due to a variety of factors, but in theory the Pro3 will work, sure. I recommend getting a 0.2mm nozzle for the fine details.
@emersonsouza3147 Жыл бұрын
Is Raise Pro 3 Plus able to use Ultrafuse filaments BASF to make metal parts?
@AMAcademyBayreuth Жыл бұрын
Yes. However, you may want to come up with a way to have the metal filaments hanging above the printer, rather than putting them on the side, as the stiff filaments don't like being bent that much.
@emersonsouza3147 Жыл бұрын
Is Raise Pro 3 Plus able to use Ultrafuse filaments BASF to make metal parts?
@karlphipps5511 Жыл бұрын
My question exactly! I have read that this printer has FFF technology which I think means it prints ultrafuse PLA 17-4 PH filaments
@karlphipps5511 Жыл бұрын
But I’m not sure so would love to know if this guy could help us out
@emersonsouza3147 Жыл бұрын
@@karlphipps5511 Thank you for your message, I hope somebody can help us here with our doubt, I believe it is able to do, but I am not sure.
@AMAcademyBayreuth Жыл бұрын
Yes it can. BASF has used the Pro3 themselves as well. However, due to the abrasive and difficult nature of metal filaments, some parts may wear out faster than normal. Additionally, metal filaments should be suspended above the extruder, as they don't like flexing in the filament tubes so much. You can have a look at the Forge1, Raise3Ds 3D printer that is specifically designed for metal printing. Obviously that doesn't make sense if you only print one or two metal parts a year, but if you print a lot of metal it could be interesting!
@aaroneiger4576 Жыл бұрын
How would you compare this to the Mark Forged Onyx Pro (Gen 2)?
@timmeybt Жыл бұрын
You should compare the E2CF with the Onyx One. The Pro offers continuous (glass-) fiber. That is something different. With the Onyx One you just have one material. So a very closed system. But I have not used these machines, so I can't give you more feedback.
@Lloydby Жыл бұрын
You seriously bro 14:30?
@yonutz333 Жыл бұрын
The way you present that it is better value is just sooo German, or at least feels like it
@rabiaislam355 Жыл бұрын
Maine bhi banana hai Best education acedemy kaa
@lazyman1011 Жыл бұрын
Es fehlt leider der Part mit der Konstruktion.
@ingenieriafonjausa4615 Жыл бұрын
If I glued to the Raise bed and left bubbles, how do I get them off? I tried using the roller but some just don´t go away.
@AMAcademyBayreuth Жыл бұрын
The roller and more force is my first recommendation. Sometimes heating up the bed, then taking it out of the machine and trying to roll out the air is also an option. Due to the heat the air expands and that makes it a bit easier. As a sort of last resort, you can try and use a needle to puncture the surface in the middle of the bubble to let the air out - but I haven't tried that myself yet so I can't guarantee how well it works. Depending on the size of your bubbles you can also just try printing with them still there - maybe they don't matter much for the final result. This is obviously only the case for fairly small bubbles. The absolute last resort is to buy a new sheet of adhesive and trying to do it again, this time without bubbles.
@chrisr1241 Жыл бұрын
Welchen PVA Kleber kannst du empfehlen? Finde irgendwie nichts wirklich gutes. Hat magigoo da was?
@rajrentfro27 Жыл бұрын
Good brief. I am now informed.