Unfortunately David the engineer and creator of the Shockwave system retired last year.He sent out a link to all of his customers for someone who is making a comparable sound system.If I can find it,I will post it here for you.Thanks,Todd

@@todddemaria9600 Cheers todd thank you buddy.

www.beier-electronic.de/modellbau/home/home.php?sprache=gb

@adriansullivan-q9i I found the link,they are in Germany.I have no experience with this company so you may have to email them yourself and see what they have.

@@todddemaria9600 cheers todd you're a star

Thank you for the compliment and commenting. I was building this for a buddy and near the end of the build he offered it to me at a good deal.He was afraid to fly it.

Красивая модель, для управления нужны стальные яйца и опыт.

@@JohnVHRC Thank you!

Thanks for the compliment.Feel free to message me with any questions and I'll be more than happy to help if possible.

@JohnVHRC Thanks John.I know you will enjoy flying it once you get it going!

@@datvik7187 Depends on flight pack size and how aggressive you fly.Me using two 6000mah packs flying moderate scale,I can safely get 7-8 minutes.

@@todddemaria9600 thank you for insight! Hope to get my self a Roban 700 soon!

@@datvik7187 you're welcome.They are definitely a cool bird to fly.

Yes I reversed the rotation by flipping the one way bearing and reversing motor.Blades are Roban 700 size blades that are 600mm.I am also using longer tail blades to help counteract the inertia if a 5 blade head.Hope this helps!

Thank you Mark!Greatly appreciated!

Thanks Kirk!Coming from you that means alot because your a beast on guitar!

10 inch.I believe about 1/7th scale.From warbirdpilots.com

Align 700.It was my 3d heli for years so I knew they were tough mechanics.I retired them into the MD.

Thank you!

Thank you!

Thank you Ed.I believe I was using my Doc Severinsen piece from Pickett Brass.

I am using two 2" transducers and a 4" Visaton 8ohm speaker

@@todddemaria9600 It was just what you are looking for. May I ask where can I find the audio file? Can I use it with MrRCsound Aspire? Thanks for the reply

@@mariocascella6946 Audio file comes with the Shockwave system from Model Sounds Inc. It is a company based in Canada.

@@mariocascella6946 modelsoundsinc.com/index.php

Thank you Kevin!

Thank you John for the kind words!I really love the horn.I have 3 of them but the 75 plays the best.As with any type of horn,they all play a little different.Not worse,just different.Im sure you will be happy with yours.

@@todddemaria9600 How would you compare the Getzen to the Conn Connstellation (36B)?

I believe from what I remember,the Constellation seemed a bit tighter and had to back off the air some.Sound was more focused and not as wide.Problem with comparing is changing the mouthpiece to match the horn would change that.

@@todddemaria9600 I hate to bug you, can you recommend a mouthpiece? Kurt Thompson speaks very highly of the Bach3E.

@@johncifra531 As you probably have heard,mouthpieces are like selecting shoe sizes.What are you playing on now?

Thank you! Cheers!

Jon crashed this heli a year ago but he was flying the stock blades.He hit a power line and totaled it.

Thank you Leon!

Thank you John

Thanks John!

I am using the AR7200bx.The mechanics are a Trex 700e.I flew it 3d for 7 years before I decided to give it a life of ease in the MD500 lol

@@todddemaria9600 Nice, Im in the same boat on a trex500, but cant the ar7210bx to dial in on mine. Thanks. Putting mine in an airwolf, my first scale heli if I can get it to work

What isn't dialing in on the 7210?Its basically the same unit.I also use Ikon FBL on several other helis.I like them more than the 7200's.They are blue tooth so I can do set up or make adjustments with phone or laptop without having to access any wiring.

@@todddemaria9600 My trex was flying perfectly on a different FBL, then I switched to this one, the tail I cant get right, I lower the gain enough to keep it from wagging so bad, now it wont hold solid when punching the throttle.. Also the cyclic, isnt solid and it doesnt feel very responsive. trying to research what else to do other than the 3 dials?

Sounds like you should try a different fbl.Other than mechanical and fbl gain,I dont know what else you would need to change if it was flying good before.

The fuselage is Roban from Motion RC.The mechanics are Phoenix Tech from Motion RC. Phoenix Tech is almost like Align helicopters.

Maybe 120mph

I have not flown a helicopter.Been in many though and believe I could with proper training.I have flown many planes over the years with friends.

Thank you Bill!

Thank you.I will pass that on to Neal.He was the pilot.I was just recording.

Hey Terrence!Got the pilot at warbirdpilot.com.They have civilian and military pilots.I believe this one was 1/8 scale.As far as the windshield,I didn't really polish it.Just used Maguire's detailer and a micro fiber cloth on the entire bird.

Right on. It looks really good. I have built the black, white and red version. I’m thinking about making some Trump emblems to give it a controversial livery. I too use Adam Martin’s pilots in mine, but yours look more size appropriate.

Thanks Terrence.+1 on the Trump livery!

So I have to ask. Did you modify your pilots arms and legs? Yours looks to fit properly in, but mine doesn’t seem to look right. Adam makes a special helicopter helmet with mic boom too.

@@terrencejackson4587 I don't recall any mods.

Thank you very much David.Yes they are quite a challenge.

Now that is a great idea!

They are available at motion RC

Hi Boris.That is not my heli.It belongs to a friend.Im not sure what he uses if anything.I know on all my metal tail gears,I will occasionally brush some synthetic or lithium bearing grease onto the gears.I have a 3 year old MD500 with at least 200 flights and tail gears are not worn.Hope this helps.

I know it's pretty off topic but do anyone know of a good website to watch newly released tv shows online?

@Avery Raymond try flixzone. You can find it on google =)

@Ethan Arjun Definitely, have been watching on flixzone for since april myself =)

@Ethan Arjun Yup, have been watching on FlixZone for years myself =)

The 800 is a super scale with cockpit and many more added details included.The 800 is much larger.This 600 was just the fuselage so I had to build it like I wanted it.

Thank you for the compliments!

Thanks John!

William,I used the Phoenixtech 600.I was commissioned to build this for a friend and he had everything needed to build.He got out of the hobby and since I had possession he made me an offer I couldn't refuse.I would prefer to have used Align mechanics but am quite impressed with these.

@@todddemaria9600 do you think a stretched TREX 550 DFC will fit the fuselage ? I am bit worried since the DFC head is quite low. Is this the ref of your airwolf ?scaleflying.de/product_info.php?info=p1923_airwolf-extended.html ?

@@ilkesmets2899 Mine came from Motion Rc but Im sure its the same one.Stretched 550 will fit fine because of the 600 boom.As always the will be some customization mounting the mechanics.

Thanks Fred!Merry Christmas to you!Hope all is well.

I didn't paint anything on the outside.Its probably the angle and the glare throwing the perspective off.This kit comes pre painted.

The preformed windshields have the white trim around them adding to the white color of the nose.

@@todddemaria9600 Ok

Thank you!