hello dear, i no longer have nissan, but for rear number plate bulbs you have to push "whole plastic" with light to one side, and pray other side out. there are no screws, only pushing to the side and down.
@Jj-ff9vqАй бұрын
What type of clips are they? How did you get the clip out is it a clasp?
@frostsilenecАй бұрын
they have new "generation" on aliexpress, maybe cables will fit, if not, its easy to solder it / use small wago lever. its easy to take it out, you just need to take your time, think, have basic tools, and do it with 20 celsia+
@Jj-ff9vqАй бұрын
@@frostsilenec Thanks I managed to replace mine and you helped me to do that. 👍
@frostsilenecАй бұрын
@@Jj-ff9vq happy to hear that this channel still helps, but no more content, QQ is sold now
@MinkieMahungati2 ай бұрын
What is the name that cover the filter
@axelaxel85942 ай бұрын
Thank you very much! 👍👍👍
@MillosTotiSoloMillos4 ай бұрын
Amigo el video está muy bueno. Podrías enseñarme cómo quitaste la pieza donde está el logo de NISSAN, la pieza que está justo arriba del número de licencia, la pieza que sujeta el faro de luz
@frostsilenec4 ай бұрын
car is gone :)
@ZisGR814 ай бұрын
This black plastic that goes on the couch pedal started coming off and I don't know what to do . The other day it came off while I was driving and shitting gear and the clutch stayed down with no pressure. I had to pull over and clip it on again but it's really dangerous and frustrating
@soty3917 ай бұрын
I'm looking for clutch return spring , Can anyone tell me the number of that spring or where to order it ??
@Thambiah-c3h7 ай бұрын
Thank you , you are the only one shows us the very imprtant part of the bulb changing, inside the clip and so one, very usefull video, thank you
@tylerdurden75008 ай бұрын
Thank you
@mariavitalioti220010 ай бұрын
Kann better expleing?
@ion-danielpopa202511 ай бұрын
1:35 I have lost that left metal clamp :(
@NeilGardner-l1s Жыл бұрын
No need to remove the motor, the 2 screws are accessible without 👍
@grandiora Жыл бұрын
I had it as well but my dealership ended up tightening something for me. I dont know what they did but it worked afterwards and no more sound. Show this to your dealership if you have problems and are seeing this video now.
@freddy_krouger_666 Жыл бұрын
AUTOBOND GROUP a.s. - Nissan jsou to největší zloději autoservisů, jaké jsem kdy viděl! Zažil jsem to samé s filtrem, ale platil jsem na fakturu 2x, protože "byl mi měněn filtr" (jednou servis 2 roky, jednou servis 5 let) AUTOBOND PRAHA NEDOPORUČUJI a už tam nejezdím!
@evieemaya88 Жыл бұрын
Great video, you may want to change the title to "squeaking" sound is what you mean 👍🏽
@frostsilenec Жыл бұрын
done, squeaking, thanks.
@LeoGwizdala Жыл бұрын
squeaking , just saying.
@Dw-cr2dr Жыл бұрын
Looks very stiff pedal
@Dw-cr2dr Жыл бұрын
Looks very stiff pedal
@valeriualexandruvlad533 Жыл бұрын
Hi can I ask what is the orange stick you are using?
@frostsilenec Жыл бұрын
Search for Plastic Auto Dismantle Tools , on ebay / aliexpress , using them almost every month on various stuff around car.
@uti7 Жыл бұрын
Wooooow, thx, silence !!!
@eevanfly Жыл бұрын
Thanks your very very much
@Roccat54 Жыл бұрын
Ako to drzi po tych rokoch?
@frostsilenec Жыл бұрын
stale povodne, tj 3 roky, mam i na druhom aute cca 2 => stale pohoda, kdyz to jednou za par mesicu zkusim
@Roccat54 Жыл бұрын
@@frostsilenec super dik :) kolko si tej pasky kupoval 1 meter?
@frostsilenec Жыл бұрын
@@Roccat54 1 meter na 1 auto je urcite dost, a ceny sli uz dolu ja za to daval snad 28 eur za metr, aktualne se da dostat na 10.
@kadmak9859 Жыл бұрын
Hi friend, i have a small hole in the hose that rests at the filter box. Is it serious , I must change it or not?
@frostsilenec Жыл бұрын
Hi, i guess that ducktape is your friend?
@firthsfinds1870 Жыл бұрын
Thanks for the video, my car failed MOT on wing mirror light not working , ordered and watched your video to fit it, all passed for another year!
@frostsilenec Жыл бұрын
good to hear that this still able to help to someone :) , enjoy
@FruitLoop20202 жыл бұрын
How did you get the seat belt clips in? Are there holes?
@frostsilenec2 жыл бұрын
yes there were holes in it, and they dont fit 100% until today, when you sit on back seats, covers all the time on one side pop-up over it, on second side it stays fine. looks like company changed name to carseatcover.eu , they looks same. and i would still buy them again.
@crisk82132 жыл бұрын
this problem, can it cause a hard clutch pedal?
@frostsilenec2 жыл бұрын
i dont think so.
@barefoot692 жыл бұрын
Squeaking !
@andrekalweit19982 жыл бұрын
Passt auch Nissan Juke F16! Nissan und Renault benutzen gleiche Pedaleinheit!
@vd62672 жыл бұрын
фрьом рьязань? сасовский акцент :) спасибо, давно так не ржали!
@frostsilenec2 жыл бұрын
actually central Europe and 0 English knowledge about cars :)
@happygrecian56072 жыл бұрын
Thank you so much for doing this video AND for doing it in English. I think your English is pretty good!
@frostsilenec2 жыл бұрын
my english sounds pretty bad in videos, but i know that it can help. enoy :)
@Barcodeali2 жыл бұрын
where do i get this to purchase? i have a 2015 j11 and the head unit has a 3" non touch screen
@frostsilenec2 жыл бұрын
www.aliexpress.com/item/1005003483775333.html , ive bought recently cheapest one ( 1 GB ram , 2 cores - WIFI (1GB 16GB) AB2 ) for 120~ eur - but its too slow - so using it with android auto then its fine. and ordered 4 GB ram , 8 cores ( 4G (4GB 64GB) AB, SPAIN ) to use it alone. but you can look on eshops around - even here in slovakia there are few which are able to sell it to you and install it for you... just google locally for china radio , random example here jfauto.sk/blog/prislusenstvo-pre-cinske-autoradio
@okaygoogle7812 жыл бұрын
Thanks for the video. I think you have to pull quite hard towards you to get it off
@barbosa19842 жыл бұрын
Nice vídeo 💪
@johndewit72802 жыл бұрын
You just have a friend for life! Thanks to this video I was confident to replace my normal turn lights with dynamic ones. I bought these at aliexpress for13 euro and they are even better visible than the original ones. I do have a 360 deg. camara system and so there are cameraś mounted in the mirror. That was a bit more tricky but not so much that I had to stop. Again: thanks for your video
@frostsilenec2 жыл бұрын
happy to help!
@chestercopperpot37932 жыл бұрын
Thanks for making this video!
@amirashfaq85992 жыл бұрын
I used same fuse one, but if i put on engine stop/start feature, camera restarts when engine starts.
@williamwatson67182 жыл бұрын
Hi were did you purchase them from
@frostsilenec2 жыл бұрын
www.aliexpress.com/item/33011598635.html
@frostsilenec2 жыл бұрын
i got them until now, after few years, very happy about them
@Ninjaa7862 жыл бұрын
Thank you for your help
@frostsilenec2 жыл бұрын
mine broke after 3~ years, had to buy new-gen ones, as these were "old" with some kind of module inside of cable. so old/bad - something "bulky" on cable, new/better - clean cable with connector imgaz.staticbg.com/images/oaupload/ser1/banggood/images/8E/A6/82ace609-7f38-49ca-8da0-bffb66abd197.jpg , looks like even link in my video is newer now - as cables looks normally.
@caseysimon63572 жыл бұрын
The T15 bulbs are no longer available
@raffaelenapolitano93412 жыл бұрын
Hi, it's not possible to use the nissan microfone instead of third part microphone? It's not a normal microphone with 2 cables?
@frostsilenec2 жыл бұрын
Hi, i guess its should be easy job to cut the wires, and test it, but my way of doing this is that i can convert whole car back to stock over weekend in case that i want to sell it. Since microhpone is not good when calling, i guess its worth a try to do it. Maybe ill do video, but no longer motivation after google actions on monetization.
@raffaelenapolitano93412 жыл бұрын
@@frostsilenec Thanks for the answer, but I intended to connect it using the cable in the connector behind the stereo instead of install a separate cable, just using the existing cable because I want to replace with new android car tablet the have separate cable for mic.
@arobAlbiero2 жыл бұрын
@@raffaelenapolitano9341 Ciao Raffaele, anch'io penso si possa utilizzare il microfono della plafoniera perchè non amplificato. Basta connettersi a questi due cavi e all'altra estremità saldare un jack maschio da 3,5 mm per innestarlo sulla femmina del tablet.
@euan4472 жыл бұрын
@@raffaelenapolitano9341 Ciao. Hai già fatto questa modifica (usa il microfono originale)? Sono anche interessato a sapere se funziona e come è fatto. Grazie.
@euan4472 жыл бұрын
@@arobAlbiero Ciao. Hai già fatto questa modifica (usa il microfono originale)? Sono anche interessato a sapere se funziona e come è fatto. Grazie.
@isilder2 жыл бұрын
SQUEAKING not squeezing.
@p8rdm3 жыл бұрын
Hello could you advise on how to get that stupid trim off around the door handle, I’ve ended up breaking mine
@frostsilenec3 жыл бұрын
i know about my friend and myself, that we broke it too on one side - even when i know how exactly its looking, buy more china plastcis tools, maybe you will be more lucky.
@horakdominik3 жыл бұрын
@@frostsilenec *or almost break it, that it was little bit damaged, for exmaple when i see this - he definitely broke it too kzbin.info/www/bejne/bnXaln6OotZ3mM0
@bulentsahin3 жыл бұрын
Hello there. x tronic cvt transmission oil change does the authorized service offer? At how many thousand km does it need to be changed? There is a discussion here, the authorized service cvt says no oil change is required, but special service masters recommend changing it at 60 thousand km. What is the situation in your country? Can you give information?
@frostsilenec_vr77503 жыл бұрын
Hi Sahin, i think that its same - not required by dealership, but they can do it - of course for price - transmission oil is little bit expensive in every car. sorry cant help much more, i dont have much QQ owners with CVT around. Regards.
@bulentsahin3 жыл бұрын
@@frostsilenec_vr7750 thanx
@testdriver39283 жыл бұрын
Hi! Does anyone have problem with heavy clutch pedal which I have on my Qq 2019 1.3 petrol with only 27000km?
@constantinekaramanis33532 жыл бұрын
Mine has this problem. They changed a clutch set at 8000 km. The problem remained. They changed a second clutch set, with a newer code. The problem limited but still persists. They told me that both clutch sets were in very good condition (!!!). Now, I am trying to solve the problem outside of Nissan. A car-mechanic friend of mine will examine the damper and the master cylinder. Really awfull and the manufacturer is doing little to help the owners!
@marktully3058 Жыл бұрын
I've recently changed from a 15 reg 1.6dci to a 69reg 1.3 petrol.ive noticed the clutch is heavy.it operates correctly but seems heavy if you're hold the car on a slope or in traffic.iam glad it's got auto hold on this one.iam wondering if it's the pedal return spring.took it to the dealership today and they don't think there's any issue but iam sure it's overly heavy.
@sanelmehurovic251611 ай бұрын
@@constantinekaramanis3353 Did you solve the hard pedal problem ?
@constantinekaramanis335311 ай бұрын
@@sanelmehurovic2516 Yes! The problem was that the fluid in the hydraulic circuit was contaminated. A sample was taken from the car and the fluid was full of a strange white substance. Local dealer replaced, under warranty, all the circuit with new parts and fluid. Now, more than a year after this, the clutch is working properly. In my opinion, I think that the problem is with a number of cars reported by the drivers, with contaminated fluid. Either was a problem using wrong fluid (wrong DOT?) or with humidity entered the circuit (I don't know how this could have happened).
@moskalitel3 жыл бұрын
On J11 2020 this doesn't work. Can't remove the glove box separately from air bag and vent duct... На новом J11 не смог снять перчаточный ящик отдельно от торпедо с воздушной подушкой и соплом вентиляции. Теперь это цельная деталь (кроме сопла).
@frostsilenec_vr77503 жыл бұрын
thats facelift - called J11-E according my data, i guess some change has been done :(
@vic197210003 жыл бұрын
thanks
@Kuba-fq1ve3 жыл бұрын
Fakt super video velmi si toho vážím, Díky vám sem prošel druhákem. dislike
@clode_condor3 жыл бұрын
Hello, did you install the button for the fog lights? Do you have a video tutorial? I already have the wiring to the headlights but where do I find the part to put the button? the button I have already bought ... thanks. Claudio