fix addiction

Пікірлер

@FISHAWNfishing 15 күн бұрын

Lol😂

@sixty6chevy 18 күн бұрын

😂😂🤣🤣😆😆

@benweaver2788 18 күн бұрын

Must have been knocked too hard during shipping

@jonathannagela2130 20 күн бұрын

It SHOULD be npt threads.

@Jus4ya 20 күн бұрын

Switch the gauge

@chuckfischer7202 21 күн бұрын

Had one just like that. Didn't last a week. Unscrewing the old gauge, you've already invested more effort than the thing is worth. There is a better one, but beware. The tire has to have some pressure in it, else, no go. So, having just patched a tire or tube, it won't inflate it.

@702prodigy 21 күн бұрын

so what you’re saying is… Harbor-Break

@austinmckimmey8566 21 күн бұрын

I have a handle full of broken ones. Using them in the bike shop. I either just buy them on sale. I’ll return/exchange them every once in a while.

@FedUpCanuck 21 күн бұрын

Wow you give up so easily. There are plenty of epoxy including JBWeld also just take it into a plumbing supply get an adapter it will easily work

@fixaddiction 21 күн бұрын

Haha! It might seem that way 😅 Right after this video, I put permatex ultra blue on it and let it cure. I have not revisited it yet, but I figure it will need to be wired or attached in place now to keep it from blowing off under pressure ❤ I hope it works 😁

@omanwillydogistaken 21 күн бұрын

the harbor freight gauges bsbt not npt

@Michael-uc2pn 22 күн бұрын

Ive seen so many bad/cheap mechanical gauges over the years, especially ones on air pumps, that I don't even trust them anymore. I've got a digital hand guage that is accurate to 0.1 PSI and I use that to check pressures. If i overshoot by a bit I just let a little air out and check again.

@fixaddiction 22 күн бұрын

@Michael-uc2pn I agree the digitals are very nice. I had one that lasted a decade on one tiny battery. I need another! Thanks

@samlittle5087 26 күн бұрын

You’re welcome! I had to do the same thing on my van!😂

@TrueSeek-m7b 29 күн бұрын

Great looking car!

@fixaddiction 29 күн бұрын

@@TrueSeek-m7b thanks! Still for sale 😃

@TrueSeek-m7b 29 күн бұрын

@@fixaddiction Man, I really love the black paint of yours. I’m currently working on my 65 Barracuda medium blue with light blue interior. Still deciding on the drivetrain, engines on hand are 1963 318 Poly, “1977 360 LA, a 3 speed manual or a 901 auto? Decisions decision... Last year, I bought a rust free rolling shell no engine or trans had been garaged 35 yrs prior bringing her home. Needs paint, body is straight. I’m aDIYer. Just having fun. Previously restored a 65 GTO.

@sixty6chevy Ай бұрын

Whats the difference between the 9635 and 9625?

@fixaddiction Ай бұрын

@sixty6chevy 9635 has egr provision

@billybob1723 Ай бұрын

Sounds like new.

@johnjohnson4306 Ай бұрын

Dennis Hopper lives.

@alkempton1512 Ай бұрын

Good entertainment

@GeorgeJackson-v5c Ай бұрын

49 cc of raw power is no joke 🤣

@fixaddiction Ай бұрын

@@GeorgeJackson-v5c 🤣

@drk1091 Ай бұрын

We did the opposite. Have a mopar 440 in our motorhome, and couldn't keep it idling/running with the carter. Found a Quadra jet off an old Chevy, rebuilt it and put it on the 440. Mileage doubled, it idled and still runs like a champ.

@fixaddiction Ай бұрын

@drk1091 wow that is awesome !! Doubling mileage in a motorhome is huge! I would really like to find the correct quadrajet for this engine 😁

@andriiosmak4913 Ай бұрын

Did you have to pre-drill the holes?

@samlittle5087 Ай бұрын

Lee was pretty stoked! Till he wasn’t… get better soon Lee!

@sixty6chevy Ай бұрын

That's where my sandal went !! 🤣

@johnyld5.56 Ай бұрын

Sexy

@FISHAWNfishing Ай бұрын

Great show!❤

@larryfernow4071 2 ай бұрын

That tube is used on marine applications, in the event the diaphram ruptures it is plumbed to the carburetor. It'll run rough but alerts you that you have a problem

@fixaddiction 2 ай бұрын

@@larryfernow4071 wow cool, thanks!

@FISHAWNfishing 2 ай бұрын

Go shove a stranger !

@FISHAWNfishing 2 ай бұрын

Wow look at that hair ! And those ripped guns💪

@ryanbowler9254 2 ай бұрын

its a rachet start, not a kick start i think

@MadTuning01 2 ай бұрын

That’s sweet I had a Honda moped that I left at my buddies gfs house and well once she turned into his ex she threw out all the shit and threw away the moped….fukin bitch…

@ddt983 2 ай бұрын

Had a 65 273 miss that car even though I have a vintage challenger maybe trade a Toyota rv for it

@fixaddiction 2 ай бұрын

@ddt983 thank you. Trying to reduce my project load though

@sixty6chevy 3 ай бұрын

Yup!

@JimiLehman 3 ай бұрын

Interested in purchasing this vehicle please contact me

@JimiLehman 3 ай бұрын

I'm interested in purchasing this vehicle please contact me

@fixaddiction 3 ай бұрын

Hello, please email me at [email protected] with your contact info. Thank you

@gaetanodetorrice5555 3 ай бұрын

Great price 👍. Nice car I love the push buttons. I own a 66 formula s barracuda 4-speed 2734 barrel commando. 👍. I drive it every week even in the winter if there's no snow.😂

@christiand6768 3 ай бұрын

Looks very good for such an old car . Most modern cars looks worse that are only 10 years old. That baracuda cant have seen much winter roads with salt

@fixaddiction 3 ай бұрын

@christiand6768 thanks, yes you are correct. I may not have mentioned - it was a California car. The new owner will even get the cool vintage California license plates 😁!!

@sixty6chevy 3 ай бұрын

😂

@douglasamadio5721 3 ай бұрын

Great video! As someone who has three of these, I would say that your price is fair for the car in it's present condition. If you are able to edit the video, a good shot at the lower quarter panels, including the trunk turn downs, would be something I would want to see if I were in the market for a 4th (I'm not) Other buyers may be interested to see their condition. Good luck with the sale

@fixaddiction 3 ай бұрын

@douglasamadio5721 thank you I appreciate the feedback! There are more barracuda videos here, one showing up close imperfections

@CleoBenson-n9i 3 ай бұрын

i believe i found your under car video i'm very interested you said you have title where is this vehicle locate@@fixaddiction

@CleoBenson-n9i 3 ай бұрын

@@fixaddiction Im very interested in car where is it located

@fixaddiction 3 ай бұрын

@@CleoBenson-n9i tacoma wa

@marjoriebasballe2722 3 ай бұрын

What fancy tool do u need to take the dewalt blower apart?

@fixaddiction 3 ай бұрын

@@marjoriebasballe2722 I believe it was just a torx bit and a Phillips

@earlbarnes8393 3 ай бұрын

You're missing 2 more clips under the cup holder piece. 4 10mm bolts when the dash is open, it'll come off and you'll see them.

@fixaddiction 3 ай бұрын

@earlbarnes8393 thanks for the tip! I'm glad they are missing as they seem unnecessary 😄

@eugenkaranxha1659 3 ай бұрын

It's a shity design on my dodge van it's so easy to remove that cover with the chevy you have to remove so much shit to get to the engine I am modifying my seats so they can be unlocked to remove them easy for 60 thousand dollars they could have made this crap much easier to get to the engine instead of tearing up half of the van to remove a God damn cover and everything is snap in which they end braking after you remove them see what you have to do to replace the stario on this vans it's crazy I just cut around it and installed a bezel for easy access

@skypopshow 4 ай бұрын

i couldn't put gas inside my van and toyota are saying that once the rollover sensor breaks the gas tank is toast. my van is 2022 and they're trying to deny warranty im so mad

@fixaddiction 4 ай бұрын

@skypopshow sorry to hear that. what is preventing gas from going into the tank? I can't fathom how a rollover sensor going bad also makes the gas tank bad. Thankfully, my chevy still works fine, except the airbag system usually will not work when the airbag light is illuminated- which it is- due to the ROS.

@sixty6chevy 4 ай бұрын

Spider on the table!!

@fixaddiction 4 ай бұрын

@@sixty6chevy 🤣AAAAHHH ! !

@jasonhaff9757 4 ай бұрын

how did you end up fixing the kickstart?

@fixaddiction 4 ай бұрын

So with it being my first time, I'm not exactly sure that I fixed anything. I did not look up this procedure before doing it. I was able to inspect and put it back together correctly and have it work. I've never had a Honda that didn't have a right hand kick-start like a regular motorcycle. This whole windup kick-start was new to me. Since then I have cranked and cranked on it and it has not failed. That's one fun little scooter I can tell you that

@fixaddiction 4 ай бұрын

And with the brake cable being broken on the left side which is what releases the spring it may have been wound up and not released making the kickstarter feeling like it's jammed and I had no idea that it was a ratchet at the time it might have been fine but I'm glad I took it apart and inspected and got a nice fresh oil back in there

@fingling8 4 ай бұрын

You had my interest until i saw it could not be driven--I *thought* the price too good to be true. I sold my gold one in 1993 or so for $500--working perfectly. Don't ask. I never stop looking for one. I'd prefer the Torqueflite transmission, too. Beggars can't be choosers! This is very nice.

@fixaddiction 4 ай бұрын

Sorry to disappoint. I will find a good motor or have this one rebuilt if nobody buys the car as-is... then keep it. But until then, it would make a great car for a good father/daughter project 😁

@CleoBenson-n9i 3 ай бұрын

@@fixaddiction I have interest in this vehicle curious about rust any in floor or trunk pans how about quarters is it titled? Thanks James

@fixaddiction 3 ай бұрын

@CleoBenson-n9i I made a video a couple months ago, I will post it today - I crawl under and around with the camera looking for rust. Thanks

@fixaddiction 3 ай бұрын

Uploading now. Clean title in my name

@warszawiak01 4 ай бұрын

dont lose washer put in right place see work shop manual. i change gasket in my honda nc 1980

@JesusKing1105 5 ай бұрын

Tramontina- Brazil, Bellota- Costa Rica, Imacasa-El Salvador 👍

@sixty6chevy 5 ай бұрын

Looks sweet ! I love the fold down back seat !!

@michaelellis6420 5 ай бұрын

Why the screen so small killa, good video though 💯✊🏿

@fixaddiction 5 ай бұрын

Best viewed with phone horizontal. Touch the little square in the corner to expand the video, it gets very large

@FISHAWNfishing 5 ай бұрын

Yes

@chrispiazza7487 5 ай бұрын

Dig your 'cuda. Sadly, I'm kinda getting out of the hobby. Is that a push button transmission?

@fixaddiction 5 ай бұрын

Yes the ol push button typewriter 😁 its such a neat car. I too am on the downslope of classic car ownership. Still have my first car, but for how much longer I am uncertain

Ең жақсы KZbin

Пікірлер