It looks like you took the USA attachment off and just using Amstel as a rope mod. How are you tying off ?? Could you make video of attaching stick to tree? Thanks
@genesis3dprinting8 күн бұрын
kzbin.infoFQOhZsANV_M?si=Gf7n5NqSYj4zmlNX You can check this video out. I haven't tested this method out, so please test this at ground level first.
@BryceRaisanen-lj3li11 күн бұрын
When back in stock? Website says sold out on 10-7-24
@genesis3dprinting11 күн бұрын
Hoping to add more as soon as we can
@Roknrobn5514 күн бұрын
Cool!❤
@genesis3dprinting11 күн бұрын
Thanks!
@Roknrobn5515 күн бұрын
👍🏻👍🏻
@urbanarcher353515 күн бұрын
Great looking arm and a very good price
@genesis3dprinting14 күн бұрын
Thank you! I'm biased, but nothing beats this arm for the price and features.
@wyattmichaud4615 күн бұрын
🔥🔥🔥 ordering one
@genesis3dprinting14 күн бұрын
Yeah buddy! You will love it.
@adamolson772420 күн бұрын
Just ordered one yesterday. You mentioned in your last video that you were working on an amsteel connection method. Will that work on this Gen 2 version?
@genesis3dprinting19 күн бұрын
@@adamolson7724 yes we are working on something for the Gen 2 one. Not sure when we will release it though
@MisfitD521 күн бұрын
Genius idea! Any word on when these will be back in stock?
@genesis3dprinting20 күн бұрын
They are back in stock right now!
@MisfitD520 күн бұрын
@@genesis3dprinting ordered!
@Roknrobn5521 күн бұрын
❤❤AWWWWWE 😘
@Roknrobn5521 күн бұрын
AMAZING YOU 2! I’m so Proud of all you’ve accomplished! ❤
@Roknrobn5521 күн бұрын
I ❤ THIS VIDEO! It’s bad assness! I love you guys! 🏹🦌
@donchasteen6290Ай бұрын
Do the SSS pieces break in over time? I have to use a screw driver to pry mine apart after they’ve been pressed together.
@genesis3dprinting29 күн бұрын
When they are installed on your sticks you are having this problem? Shoot me a message through our site as I would love to see a video of the issues you are having. It will be snug but it shouldn't be that difficult to seperate.
@BryceRaisanen-lj3li6 күн бұрын
These sticks would hang a lot better with a versa button and cam buckle strap, or daisy chain. The prussik sucks, no way I'm doing that in nov/Dec in minnesota.
@michaelmohler9072Ай бұрын
just got mine in, love them! can't wait to use them in the field!
@genesis3dprinting19 күн бұрын
@@michaelmohler9072 love it man! This system is one of my favorites
@stickbowsniperАй бұрын
Excellent. The actual demonstration, vs. just talking about it was immensely helpful.
@joeoquendo4943Ай бұрын
My Novixes square tubing doesn’t have stealth strip. Which can I use? Thanks
@genesis3dprintingАй бұрын
I would recommend adding a small piece of stealth strips to each sticks if you are looking at using these.
@MarquisePowellАй бұрын
So how would you use this with stealth strip? Would it require me to cut holes in the stealth strip where the post is?
@genesis3dprintingАй бұрын
I would cut the strip of stealth strip out of the sticks so you can still use these.
@WallyOutdoorsАй бұрын
When will you have these products back in stock??
@genesis3dprintingАй бұрын
We have plenty in stock now!
@PriceySweaterАй бұрын
*trying to make something boring .. look exciting by camera angles*
@genesis3dprintingАй бұрын
We got to spice things up a bit sometimes :)
@sarafayelawton652Ай бұрын
How do you attach the strap stager to each side of the strap???? Any help anyone?? Theres no instructions on that. TIA
@genesis3dprintingАй бұрын
Hey Sara! Let me know if you still need help. I see you comment awhile ago, so I'm not sure if you figured it out yet.
@sarafayelawton652Ай бұрын
@@genesis3dprinting I watched several other videos and came up with a fix I think works. We see when I climb tomorrow.
@fishingwithphil2582Ай бұрын
Awesome work Austin!
@genesis3dprintingАй бұрын
Thanks man!
@underdogoutdoorsАй бұрын
These will be tough to beat, if they perform how I think they will.
@genesis3dprintingАй бұрын
@@underdogoutdoors I think these sticks will do just fine in the woods for everyone 🤙
@timothymcglothlin4165Ай бұрын
Appears to be very well designed and complement the way the sticks were designed. I bet the people at trophyline are slapping themselves in the head for not shipping those with a system like this 😂
@genesis3dprintingАй бұрын
Haha well actually Shawn and Nick both told me they did it on purpose. They were looking out for companys like us.
@MaxwellsAxiomАй бұрын
Great overall profile for this system. I don't like the attachment method for those sticks but it'd be great to get the X type Kleat that tethrd uses as a product from you guys. I'm pretty sure that design is patented, though. Overall, that's a great setup, though
@genesis3dprintingАй бұрын
The attachment method is for sure not my favorite, but there's so many ways to work around that. I actually just took the hitch off the ropes and ran with it like that.
@vitalgroundoutdoorsАй бұрын
Legos love it!!
@genesis3dprintingАй бұрын
Yeah buddy! I felt like a kid again when designing this product.
@TolookАй бұрын
How many pounds can this hold?
@KronicDaydreamZАй бұрын
From the looks of the channel name. Not much. If it's 3d printed
@TolookАй бұрын
@@KronicDaydreamZ I was looking at buying a fourth arrow and saw this. I was mainly curious to see if it would start to sag or anything over time. That’s what my current one has done :(
@genesis3dprintingАй бұрын
@@KronicDaydreamZ This camera arm is 100% machined out of an aluminum alloy. You can expect this thing to handle a good setup.
@genesis3dprintingАй бұрын
@@Tolook Well Fourth Arrow makes excellent arms. This arm is not 3D printed at all, as it is machined out of an aluminum alloy. Lots of people think it is because of our company name. We will work on trying to educate people about our products. The standard arm can handle setups up to 10lbs, and the XL can handle up to 5 lbs. Hope that helps and don't hesitate to reach out if you have any other questions.
@KronicDaydreamZАй бұрын
@genesis3dprinting yeah I'd change the name. But that's my opinion.
@reviveoutdoors4himАй бұрын
Great work as always!
@genesis3dprintingАй бұрын
Thanks Taylor! 👊
@reviveoutdoors4himАй бұрын
@@genesis3dprinting 👊😎
@camerongilbert91072 ай бұрын
How do I connect the bungee?
@genesis3dprintingАй бұрын
Here you go! kzbin.infooLrBetmMW3w?si=K1F4X5N8HSHK_uWd
@jamessasher32692 ай бұрын
The quiver seems sweet as well
@genesis3dprinting2 ай бұрын
That is right here: genesis3dprinting.com/products/plus-one-quiver?_pos=1&_sid=a3566756e&_ss=r
@jamessasher32692 ай бұрын
I like the idea of the HP. Where can I get one?
@genesis3dprinting2 ай бұрын
Thanks man! You can grab one here: genesis3dprinting.com/products/hip-pinch-eliminator-bar
@urbanarcher35352 ай бұрын
Bro that dialed sight is more expensive than that old elite! Lol
@genesis3dprintingАй бұрын
True statement, buttttt that elite shoots sooo good haha
@Kingquad7502 ай бұрын
Will it still work if the stick is fully stealth stripped?
@genesis3dprinting2 ай бұрын
It's very easy to make it work. All you have to do is remove the portion where the SSS system goes onto the sticks. The Stick Mule system will work perfectly though.
@Kingquad7502 ай бұрын
@@genesis3dprinting thanks I’ll check it out
@genesis3dprinting2 ай бұрын
@@Kingquad750 Sounds good man! Let me know if you have any other questions.
@rickkimball93712 ай бұрын
I so get it! Lol
@genesis3dprinting2 ай бұрын
It is so painful sometimes, but it at least makes some good laughs after the fact haha
@rickkimball93712 ай бұрын
Love this system! Using it this year!
@genesis3dprinting2 ай бұрын
Thanks Rick! Glad you are liking it and see the benefit of the SSS and Stick Mule system.
@shanetheninja1012 ай бұрын
Stick-stack-stow 😏
@brianguest2382 ай бұрын
That Paracord looks good on your lwcg stand how long did that take?
@genesis3dprinting2 ай бұрын
Well I wasn't the one that did it to be honest. I'm sure it took the guy forever tho haha
@jordanpearson98602 ай бұрын
Looks like the cord is way too long. Had to cut a chunk of it off. Not even close to tight enough
@genesis3dprinting2 ай бұрын
We leave it long for guy to cut it to length based on what they are using it for. Guys can also use the bungee to store their aiders on their sticks. Hope that helps!
@MaxwellsAxiom2 ай бұрын
What combination would give you the lowest profile for 4 sticks?
@genesis3dprinting2 ай бұрын
Both will be the same profile. If you stack the sticks back to back with the bottom clips it will give you the tightest pack, but you will only be able to stack two together at a time
@caseygargiulo75253 ай бұрын
Any tips for locking the bungee clip in?
@genesis3dprinting2 ай бұрын
For sure check out this video we made kzbin.infooLrBetmMW3w
@robertsirotski13673 ай бұрын
Thanks man helped a lot
@genesis3dprinting2 ай бұрын
Happy to help man! It's a little tricky for some guys.
@boatkid8883 ай бұрын
I wonder how something like this would work using magnets.
@genesis3dprinting2 ай бұрын
Magnets are nice but if you slide them parallel with the sticks they barely hold the stick together. It could work though if you keep the sticks from sliding.
@camerongilbert91072 ай бұрын
How do I connect the bungee?
@GeardUpNorth5 ай бұрын
If we have something we would like you to print what is the best process for that?
@genesis3dprinting2 ай бұрын
You can always shoot us a message through our website. That is probably the best way to reach us and we can share files better that way.
@roynorman51796 ай бұрын
I need a hp
@genesis3dprinting6 ай бұрын
You can grab one here: genesis3dprinting.com/products/hip-pinch-eliminator-bar
@StrategicVeteranOutdoors7 ай бұрын
Yall continue to make things that just make sense. Right on!
@genesis3dprinting2 ай бұрын
Thanks man! We try to make things that just make sense.
@StrategicVeteranOutdoors2 ай бұрын
@@genesis3dprinting mission success
@daveokey39667 ай бұрын
Well done! Love this.
@genesis3dprinting2 ай бұрын
Thanks Dave! We love the KPE
@browningoutdoor3888 ай бұрын
Got mine today. Great product. What are the castration bands for?
@genesis3dprinting2 ай бұрын
Sorry for the late reply! The bands are for getting the strap in place on the KPE.
@TheBladeSled8 ай бұрын
Nice! I’ll try one
@genesis3dprinting2 ай бұрын
The HPE is a must when saddle hunting all day.
@christianswecker85908 ай бұрын
how much does it weigh with strap
@genesis3dprinting8 ай бұрын
1 lb 5 oz
@6saturdaysaweek9 ай бұрын
Love that thing!!
@genesis3dprinting2 ай бұрын
Our best and favorite product hands down!
@T-ROY_699 ай бұрын
Mine should be here tomorrow. I'll try it out when the temperature warms up later this week in Missouri. Cheers!
@genesis3dprinting9 ай бұрын
Yesssss! Love hearing that man. Report back with your thoughts on it once you start using it.
@T-ROY_698 ай бұрын
I tried it out today and it's great. It doesn't weigh anything and is really comfy. Thank you!
@TheBladeSled9 ай бұрын
Nice product.
@genesis3dprinting9 ай бұрын
Thank you! It for sure solves a problem for most guys/gals