If you turn the screw (the screw without the wing nut on it) upside down, with the flat part of the screw touching the bed, it will not dig into the bed. To adjust the clamp, turn both screws until they are flat with the material you are cutting. Then tighten the wing nut until its secure!

this master has golden hands!

I would suggest based on the holes being in a straight line, you should build oversized, then cut the outside edges to the reference of the holes. That is, instead of trying so hard to keep the reference absolute to begin with.

I wish you had indicated the saw does not work well from the factory. I bought it but the fence is not square with the blade.

Thanks for your detailed videos from the FET :-) so one question: have you used a suction or vac on this table saw? if yes, how it is doing?

if you talk its better....lol

All I see for sale now is the 37070 model. It is not uncommon for online adds to show and older model that may not have the same features as the latest version.....sometimes and improvement, sometimes not.

Hello Harris, thank you for sharing your videos. I see you haven't uploaded in a while. I hope you're doing well. I just purchased this saw and waiting for delivery. I did see some comments online saying that the saw, when extended all the way out, has a lot of wobble/flex to it. Is this something you have experienced?

Perfect. Thank you for sharing - and for free!

Nicely done. I can't believe this doesn't have more likes.

Nice mod (both the table and the extractor). Will look at doing something similar myself. Thanks for sharing

Clever indeed... but what if you need to cut diagonally , say at 45° ?

Thank you for sharing Harris!, that blade looks bigger than normal, what diameter does it have?

I know this is the old video but thank you for the video. Has been exploring this concept for sometime. But may I ask what is the acrylic board for ? You seem to be using it fine without it

Cat got your tongue?

Is it possible to adjust the miter angle by yourself?

the music is like a form of torture 😵‍💫

Thank you for sharing Harris!!!

Could you cut 2” wide strips that are 24-30” long on this?

What are the dimensions including to top of blade needed for storage? I’m in an apartment, so not much space.

Greetings! At 9:14, a plastic part appears in the frame that does not allow the wooden slat to move. Under what name can it be ordered? Thanks in advance!

I bought a Proxxon FET today, and inspired by your You Tube Videos, I decided to start modifying it right away! There will be a lot of questions... What are the lengths of the profiles 20x40, 20x20 and 30x20? I thank you in advance! Excellent ideas, excellently executed!!!

I landed on this video because I also noticed that mine (exact same model) does not do exact 90 degrees. In fact it doesn't do exact 45 degrees either. When I cut 45 degrees on the both left and right hand side of the saw, then joining the two pieces together are miles off a full 90 degrees! I also noticed that it is possible to adjust the bevel plastic below, but the problem is that the bevel plastic is one whole piece and I need to reduce the angle on both sides of the saw, meaning the bevel plastic underneath can only move one way or the other. Reducing the angle on both sides, means I need the bevel plastic to be split in two pieces, so that would allow me to move them in opposite directions to have a perfect 45 on both sides. I cannot believe a saw of this cost/brand is so off that we cannot make a good enough 45 degrees angles. How does anyone with this saw manages to cut and join two 45 degrees pieces together?

Genius

wrong cut skills. Prone to kickbacks and/ord getting cut

Beware of breathing in dangerous glass dust if you do this! Wearing an n-95 mask or doing it underwater would solve the problem.

use a piece of car or motorbike tyre to clean the sanding disc

Great skills' If you enjoy spending a lot of time trying to make and expensive toy into something else. There are many other brands that do what you are creating , out of the box. The older model that Microlux sells, made in Japan is a better machine. Thank You

Would you mind sharing the Easel file you used to make this? Thanks

This is proof that you need a Sherline or Proxxon mini mill & lathe! Then you could make your own in whatever style you desire! Hope you’re doing well, as I haven’t seen any new posts from you in a long time!

Do you like that bosch green router? I want to buy one like it

That blade guard demonstrates just why most of them get chucked in a corner.

What thickness would you recomend for a crosscut for the FET saw? Is it MDF?

Nice review. What was that blue plastic thing? Very nice with the Cross cut sleigh. Could you show more of that in a video?

Can you lower or rise the blade on this model?

Can we find "Polymorph Thermoplastic" in any bin containing plastic under any form, like bottle, pack, etc . . .?

Thanks for just another helpful video from your side! Your FET videos helped me a lot. One question about the DH40 Thickness planer: Is it possible to insert timber which is grooved (90° cross feed direction) on the upside? I guess the licker-in and the feed roll are on the upside and the grooved side which I want to reduce thickness is also on the upside. Even if I would have to push it in manually would be okay to me. I just fear that the edges of the grooves might get disfigured...

Ainda vou ter uma dessas .

Just got one of these. It's a fabulous little saw. Very well made and extremely accurate right out of the box.

What a helpfull videos, you made! Thank you so much for all of them!

Hello Harri, how are you? I thought the idea and project were excellent, I would like to know if you could provide me with the project measurements. I live in Brazil. Thank you for this. Big Hug Ricardo Santos

Got bored with us after the first minute. I hope it ends well.

Hello! Do You think that KS 230 could handle guitar neck fret slot cutting? Could you set the height of the blade to 3mm? Could it cut thicker wood (rosewood, ebony, etc.)? Thank you!

cat got your tongue?

What's the deal with Proxxon videos and no narration? Is it a Proxxon thing?

Is this for sell?

Was kostet so ein Schlitten

Estou aqui numa cidade do interior do Brasil.Muito esclarecedor seu vídeo. Obrigado e um abraço.

The motor cooling air is exhausted directly into the blade housing. With nlwhere else to go, the exhaust air then travels straight down onto the workpiece, and blows sawdust all over the inside of the garage. The dust collection funnels and vaccum attachment port are merely a formality.

Yea we’re liking this…there’s an analytical mind at work here, glad to see individuals crafting beautifully made art. For m my sins I make miniature rocket lamps and you’ve shown me a couple of methods that may well find their way into future rockets.