Steven

Пікірлер

@jerrymartin5884 4 сағат бұрын

No talkin just work awesome vid dude

@realamericanz4641 2 күн бұрын

Man I love your counterweight! Did you make that?

@frankfitz3421 13 күн бұрын

Irritating music

@mcpiddler1135 16 күн бұрын

It sure beats shoveling all of the dirt! Good job operating!

@moonwalker8172 27 күн бұрын

The swing boom is your friend. You don’t need to move your entire machine side to side to dig a hole with square edges. You can also see around the boom much better. Your counter weight along with the blade behind really works well. Thank you for sharing!

@Steven-h33 27 күн бұрын

@@moonwalker8172 thank you for your comment the reason I was having to move the machine was because I had to clean up the side of the hole because the machine doesn't have much side pressure the hole was sloping in which is why I had to get right in front of it and scrape the edges

@Steven-h33 27 күн бұрын

@@moonwalker8172 I actually have a cushioning valve installed with the relief set to 1550 I should probably turn it up some to get more side pressure out of it the problem is if you let it be wide open it has so much pressure that you can actually twist the tracks underneath the machine because the undercarriage is so light perks of having a Chinese machine 😂

@DrummerBoi181 Ай бұрын

Have you had any significant problems with your machine yet? I've seen others who've had issues. I am considering buying one but hesitate. I am mechanically inclined so fixing things is not such a big deal if they are not catastrophic.

@Steven-h33 Ай бұрын

So no major mechanical problems if you're using it as a hobbyist and not commercial use it's probably good right out of the box because we're using it for commercial use I have upgraded the cooling system for the hydraulics I have added a 60 amp alternator and that 160 lb counterweight that you see hanging off the back but as far as physical failures I can't break it I have hung a thousand pound trailer off the end of the boom

@DrummerBoi181 Ай бұрын

@Steven-h33 right on man thanks for responding. I appreciate the info!

@charlesmaxey9165 27 күн бұрын

I bought 80 series no problems so far knock on wood. I had it a couple of months. Dug enough dirt to haul in and fill a hole the length of my house

@troyb.4101 Ай бұрын

I wear shin guards, back brace, and added a seat belt. added a seat hold down bolt assembly. The seat will no move if you have an accident. Does the extra counter weight help, or would you even know? I have 25 hours on my unit. The hydraulics are powerful enough enough to easily lift either end of the machine . I use mine for digging up mesquit trees. The way I use mine is to dig around the trees, then use a saw saw to cut the roots off. I'm maintaining a 55 acre fence line with my unit. When you buy any new unit, check all fluid levels, I had to add both hydraulic fluid , and engine oil also. I purchased a battery powered grease gun also. I own a H12R unit. I like it , for $6,600 delivered I'm enjoying it.

@Steven-h33 Ай бұрын

@@troyb.4101 thanks for the comment so I would say the counterweight does a great job you wouldn't really think so but that extra 160 lb behind the operator really makes a huge difference and I know all about that oil stuff I change my motor oil every 8 hours and I've already changed the hydraulic fluid once I like the machine seems pretty solid but my biggest gripe would be the slop in the bushings check out some of my other videos you can tell it's pretty stable 😁 and as far as the bushings I've already designed and built a line bore machine and I will be fixing that pretty soon we are just so busy right now

@ridgebenjamin8211 Ай бұрын

Did you make that muffler cover?

@Steven-h33 Ай бұрын

@@ridgebenjamin8211 no kymron dose a good job putting that on

@ridgebenjamin8211 Ай бұрын

@Steven-h33 any chance you have more videos on this install? This is the only one I've been able to find where someone installed one with the gas motor.

@Steven-h33 Ай бұрын

@ridgebenjamin8211 I definitely plan on making a detailed video explaining on how I did it just been so busy right now most of these mods are done over the weekend as crazy as that sounds like I'll use it at a job and find out it's not good enough and then I would literally take it home and mod it so there really not any footage of me doing it

@ridgebenjamin8211 Ай бұрын

@@Steven-h33 dang, well I'm glad to see it can be done. I'll be on the lookout.

@Eddie-f6t Ай бұрын

Nice work with a small machine and limited space and hard material

@SleepingGaint Ай бұрын

Was that slop in the hoe there from the beginning?

@Steven-h33 Ай бұрын

@@SleepingGaint yes it was but its getting more prevent now that the machine is getting hours on it 😔 up to 50 witch is nothing but damn it's really annoying you can really tell when running jackhammer because of all the weight on the boom

@SleepingGaint Ай бұрын

@ Isn this slop problem just with the gas units? Have you heard of the bigger ones having this issue?

@Steven-h33 Ай бұрын

@@SleepingGaint from what I understand it is only the gas units that have the really bad slop there is a couple people on KZbin that have the 3500 lb diesel machine and they seem to have no complaints it's just so bizarre to me that they would make it this loose I'm about to post a video showing that it's almost 125.000 slop between the bottom of the boom and the knuckle

@ScottGunMag69 Ай бұрын

Looks like a good little piece of equipment. Will it last, and how easy is the maintenance is what I would worry about.

@CurtisHembroff 2 ай бұрын

Nice

@troyb.4101 3 ай бұрын

You need to double axle the trailer. four tires will be much safer. I like the trailer, but one axle ? You should be able to upgrade it.

@405musclecars5 3 ай бұрын

I bought the XH42D and I have the same kind of issues with that swing bearing. Drives me nuts. Really hard to be precise.

@Steven-h33 3 ай бұрын

@@405musclecars5 it is sloppy I mean with everything I dove more into it and started putting a dial indicator on the bushings and pins push through there's over 125,000 of play definitely have plans to make new bushings

@fettuning5016 3 ай бұрын

Какой вес противовеса?

@Steven-h33 3 ай бұрын

It's somewhere around 140 lb

@fettuning5016 3 ай бұрын

@@Steven-h33 👍

@fettuning5016 3 ай бұрын

@@Steven-h33 скажи пожалуйста, есть ли смысл делать его??

@fettuning5016 3 ай бұрын

does it make sense to do it?

@Steven-h33 3 ай бұрын

@@fettuning5016 it makes a big difference in the stability you can drive in and off a trailer without it fliping forward I don't even have to put bucket down

@zoart9335 3 ай бұрын

The pin where your boom connects to your house looks to be short and one side is riding on threads and not pin shoulder creating slop. I'm not sure this is the case, but have seen it in a couple auction machines.

@Steven-h33 3 ай бұрын

I appreciate the advice I will 100% be pulling the boom and looking at the bushings because it is a pain in the ass trying to do fine-tune work with that much play if I find something crazy I will definitely be making a video about it

@FranklinForged 4 ай бұрын

My XH20D should arrive next month. I'll be pretty upset if my machine has the same issue with the boom. I'll be looking for future videos!

@NorCalNative530 4 ай бұрын

Keep us updated…. I’m looking into this escalator and this company prides themselves on quality…. Keep us updated brother

@FranklinForged 4 ай бұрын

@@NorCalNative530 I purchased my machine in late July. It was due to arrive in late September. But they made a nice upgrade to the new line (mine now has 2 speed drive) that didn't cost me extra (except time for delivery). So I'm happy about that.

@eddluireg 4 ай бұрын

thanks for the video , ill be looking out for more videos

@Steven-h33 4 ай бұрын

@@eddluireg I appreciate you taking the time to watch it there is a few shorts up on KZbin I work for a pool company and we finally got to take it to the job so I am uploading bits and pieces you get a lot of looks when you set up a camera LOL

@fbauer4368 4 ай бұрын

Thanks for the video. Where did you purchase it? How does the breaker perform with that small units hydraulic oil flow?

@Steven-h33 4 ай бұрын

It honestly works pretty damn good I'm going to post another video using it pretty soon I listed links to the website for the machine and the Amazon link for the jackhammer please keep in mind these are low flow jackhammers they operate between 5 to 7 gpm

Ең жақсы KZbin

Пікірлер