Added this to my mainout mix going to foh with our band and it tightens everything up. Are crowds are telling us, it’s the best they’ve ever heard the band. I take that!
@dimebag609629 күн бұрын
Hello! I see tha you recently have the Air Motion PRO. So I would like to know: What is the amount of latency? and, is it noticeable? I mean, can you perceive it? Thanks bro.
@lattieboyjohn27 күн бұрын
Hey thanks for reaching out, the latency is basically zero i would say. I know its not measured by a specific tool but its instant. I have another blue tooth midi device and I feel that the Air motion Pro is much better. I did a video of me playing with the Air Motion Pro look at it. Very good product probably the best breath controller on the market.
@dimebag609627 күн бұрын
@@lattieboyjohn Ah ok!. Well, I asked you because I consulted directly with the brand and they told me that the latency was around 15 to 18 ms. Which seems quite a lot to me, because it makes it quite noticeable to the human ear. But I don't know how much you can perceive or feel in a wind controller vs an attack controller like a synth through a plug-in like Sampletank, Native Instruments, or a guitar through a plug-in like Amplitube, Neural, etc. Where if you don't have a very low latency, you do feel a very small delay.
@dimebag609627 күн бұрын
@@lattieboyjohn I also wanted to ask you if you have tried the TECcontroler product model 'Breath and Bite Controller 2'
@lattieboyjohn27 күн бұрын
@@dimebag6096 No I havent, but i think that from the videos that I saw its very good also. The Bluetooth dongle with the Air motion pro gives you valuable information on the dongle screen that makes it so great to work with.
@lattieboyjohn26 күн бұрын
@@dimebag6096 Yeah I understand what you are saying. The Air Motion pro is a Breath controller which uses breath as midi data to control the attack of the note and the duration using your breath. You still have to play the notes on your synt in order to hear any sound from your synt or your computer. For me I have had better results with the Air Motion Pro than I have with the wind controller if i'm using the wind controller with a widi rig i set up to do the same thing.
@kaselewis9724Ай бұрын
REASON SOFTWARE
@themadhatters8529Ай бұрын
Sweet
@StefaanHimpeАй бұрын
I'm a bit confused about the dongle. Do you always need a computer between the breath controller and the instrument? MIDI usb ports on synthesizers are typically "type A" but the dongle is "type B". Also, if I want to connect it to 5 pin DIN midi ports, what extras do I need?
@lattieboyjohnАй бұрын
The dongle is very versatile piece of gear. The app for the software can be downloaded from the play store or the apple. Its used to set up different parameters for the the breath controller using your smart phone or tablet. The breath controller needs to communicate with software or communicate with your Synt via midi. If your synt has a USB port then you can connect it directly to your computer via USb, most likely then you will be triggering a soft synt on a computer.However you can set it up to trigger the sound from a regular keyboard synt. Remember the breath controller provides the data information but you play the actual notes on the piano. If you want to use a 5 pin midi cable you will need an adapter that will allow you to conver the USB midi data to 5 pin midi that will be recieve on your midi in port.The breath controller sends out wireless blue tooth midi data so your converter will have to convert that data to 5 pin mici. If you look at my youtube channel you will see a video i did with the new breath controller. However if you look I have a video that was done using an Akai EWI USb wind controller. For that I used a device from a company name CME Widi master. That device can convert the wireless blue tooth data to another device name Widi master which uses a wireless midi 5 pin gongle that recieves the wireless blue tooth midi signal at the midi in port. Check out that company and im sure others online that is doing it. It lets you convert the wireless midi blue tooth data to 5pin midi data at your ports wirelessly..
@lattieboyjohnАй бұрын
The dongle talks directly to the breath controller via wireless blue tooth midi to set up midi cc data to control breath, vibrato etc. In my video im using the CME Uhost to connected to my akai ewi usb midi port via a phone bower bank for power then im using a dongle from CME to recieve the signal via blue tooth to my computer but I can also use the CME widi master to send the signal directly to regular midi keyboard via the widi master which will receive the data at the keyboard midi in port. However the widi master will come with a midi out and midi in as a pair. the widi out port powers the widi in port. and if you have a 2 sets of widi master you can really make magic. hope you get it.
@StefaanHimpeАй бұрын
@@lattieboyjohn Thanks, I think I'm going to experiment with it :)
@lattieboyjohnАй бұрын
@@StefaanHimpe what software will you use with it. My main software is Swam saxaphones and Reason. I find that hardware synts you have to edit the patch to resond to a Breath controller properly. Where as with Swam its so easy. And software in general. How do you plan to use it?
@StefaanHimpeАй бұрын
@@lattieboyjohn Actually I will probably try several things: using it to add expressivity to sounds generated by roland Integra-7 and Prophet Rev2 patches, but probably also doing some more experimental stuff, e.g. using it as a kind of instrument of its own by using it to influence experimental compositions made with supercollider... I just really like to experiment, and have no fixed plan for it yet. I kind of expect that breath control has many possible applications beyond what it was originally conceived for.
@MikeMoroneyNZ2 ай бұрын
All good advice, thank you. Would be good if you actually enabled the EQ in your demo. :)
@PaulO-om6ln2 ай бұрын
Nice audio track. Is it avaliable or similar? Looking for this style of reggae music to dj. Thanks for the content.
@lattieboyjohn2 ай бұрын
Yes similar send me your email will see what I can do for you.
@VolodymyrRyshkovskyi3 ай бұрын
when i push the eq buttonon my pc, I see the different type of eq. With only 4 frequencies to move. How can I switch to this type? Thanks
@lattieboyjohn2 ай бұрын
Scroll down further till you find a Graphic EQ you are seeing a Parametric.
@papritech27713 ай бұрын
Amazing performance, George! 🔥🔥
@dmult23205 ай бұрын
Wow I subscribed to your channel because you explained well the tap tempo button thanks bro keep 🔥 🆙
@colinpreston61495 ай бұрын
Really cool
@solitaire51427 ай бұрын
Cant hear f#ck all.
@user-ql8xk6ri3e8 ай бұрын
what is the name of the plug in
@janneckchristiansen27788 ай бұрын
Thanks for this review. I had a bad feeling about this, so I'm glad I found your video!!👍
@BobHorvath8 ай бұрын
I have latest iOS devices and have not been able to get it connected via AUMv3 or Drambo etc or the iOS SWAM apps
@BobHorvath8 ай бұрын
This is exactly my issue with this thing! I thought it was just me.
@lattieboyjohn3 ай бұрын
I just got the upgraded Air Motion pro. Will be doing a video on it soon its really well thought out and design and its great.
@Steve120lb8 ай бұрын
How did you show your scene name "LIVE SOUND CHECK" on the screen on the top right?
@lattieboyjohn8 ай бұрын
Just name the scene and save it for whenever you need it. you can save all your settings as a scene you can recall at anytime.
@Steve120lb8 ай бұрын
@@lattieboyjohn yes that part i know, i was just wondering how you can get the scene name to show up on your mixer window like you have
@lattieboyjohn8 ай бұрын
What i did initialize the mixer for the tutorial then load the scene that Im working on. If I had started using the mixer and did the tutorial from the XR18 then that would not have shown, but because I load the scene that was already stored on my computer, the Xr18 will display that particular scene im working on. I hope this helps, this video was a while back.@@Steve120lb
This must add a lot of noticeable latency....How bad is it? thanks ;)
@gibson26239 ай бұрын
@@lattieboyjohn it s the software that adds latency, not cables. :)...That s why I use Analogue mixers, and they sound much better also :)
@lattieboyjohn9 ай бұрын
Yeah the software does, however you can lower the latency by milliseconds in Reason quite drastically going down in negative numbers. If im using a DAW and the XR 18 is my audio interface it works. its not like im running cables from my XR18 to a computer running my daw thru and additional audio interface. @@gibson2623
@lattieboyjohn9 ай бұрын
I think 128@@gibson2623
@gibson26239 ай бұрын
@@lattieboyjohn Ye , probably. is what i use too :)
@andym73339 ай бұрын
WHY MAKE THIS ITS OBIUS HOW TAP TEMPO GOES MAKE IT CONTROLLED FROM DAW
@andym73339 ай бұрын
HOW DOES XXR RECIVE MIDI TEMPO FROM ABLETON 4 DELAYS??
@arthurivex229810 ай бұрын
I was about to buy this, because it is so much cheaper than the TEC version. I'm glad you posted this video. It helped me make a decision.
@lattieboyjohn3 ай бұрын
Hey I just got the Air motion Pro and its a whole new ball game will be doing a video soon. But from just using it for literally half hour I think its going to be a game changer.
@willcombs2691 Жыл бұрын
Could help me setup osimidi. Could you do a video showing your settings ..please
@lattieboyjohn Жыл бұрын
Help with OSI midi or help setting up the network. OSI midi is very simple to set up.
@willcombs2691 Жыл бұрын
Once you get it ….yes …I figured it out.. thanks
@willcombs2691 Жыл бұрын
I wouldn’t say it’s easy…. 1 wrong detail it won’t work.. xctl mode is quick, but Mc is customizable
@bc057 Жыл бұрын
Thanks for the tips!
@neovincibeats Жыл бұрын
Cant hear the instructions
@umbertofiordispino2641 Жыл бұрын
Good job. LATENCY? I play in live with Cakewalk and use THU effects for guitar with no perceptible latency (12 ms). I would like to use this mixer to have more flexibility than the sound card. Thanks for the video, already very useful 👍
@bviflyboy Жыл бұрын
Juppa ! nice video, but it needed to be a bit cleaner; maybe a better camera.
@drvibesmusic Жыл бұрын
Greetings my brother, l hope this finds you doing well. I would like to request some info/advice about your CME Bluetooth set up please. I have an Akai Ewi USB and lm so sick of getting tangled in the 3 metre cable l want to make it wireless too, for stage. So would you tell me the exact items l require and is the Bluetooth of the Mac not sufficient or do you need an additional USB dongle as well? Respect King! ✊🏾
@lattieboyjohn Жыл бұрын
My set up is very simple. I using a the smallest phone power bank i could find and I use velcro pads to on the bottom of it to fix it on the top of the Ewi USB. Then I have the WIDI Uhost connected to the power bank, that send the current to power the WIDI Uhost. So the Uhost has two USB C ports, one is marked to USB power and the other is marked USB Host/Device. From the USB host/Device port I connect that to the EWI usb port. Both of my cable are 6inch USB cables. The other piece of gear is the CME WIDI BUD Pro. The USB Host need will communicate with the WIDI bud pro. The WIDI BUD Pro is connected to a USB port on my mac or PC. Remember this is midi over Blue tooth. The blue tooth on the mac wont see the just the Uhost, its the midi information from the EWi we want to get to play the sample in Kontact. This is my set up. However I also have The WIDI Master this is also made by CME. If I want to send midi to a Synt then I will use the WIDI Master. My configuration on the EWI USB will remain the same, the only difference is that instead of my midi going to the my WIDI BUD pro it will go to my WIDI Master which would be connected to my Synt. 5 pin Midi in and Midi out port on my synt. Hope this helps.
@miguelmatusct Жыл бұрын
It would be really cool if you could provide the link to this preset you just created! :)
@mikey38632 Жыл бұрын
I've only watched through the first reverb at this point, when it was hollow while using Insert feature. There are three pages of settings, click the button that says 1/3 for more settings. It's visible with the effects rack open, on the right side of the reverb. Is there a wet/dry? I haven't looked in a while so I don't remember.
@lattieboyjohn Жыл бұрын
yes
@Its303AcidBass Жыл бұрын
You need a portable USB charger I to power it I guess.
@lattieboyjohn Жыл бұрын
Yes you do.
@OffiBeats Жыл бұрын
🎧🔥🎧
@hfranke07 Жыл бұрын
Hi man.... get your sound right. Your sound is at minus 40db. Way to low. And dont smoke weed before recording.... just joking.
@lattieboyjohn Жыл бұрын
Sorry not sure if that happeng in the editing but will be dling an update to the vid, but will be focusong on addind some outboard analog gear as it helps with equing and compressing outside the box for better control.
@wulff713 Жыл бұрын
kzbin.info/www/bejne/m6CwXnica7CLrrs
@wulff713 Жыл бұрын
Hi Lattieboy Thanks for your tutorial. Is there a particular reason you don't use inputs 1 and 2, both with Hi-Z, for guitar and bass?
@jcproduccionessgo4892 Жыл бұрын
👍✌️
@Carsonaut Жыл бұрын
grateful for you! thank you for your xr18 tutorials
@chaalinxsyns9946 Жыл бұрын
Can i get the sample sounds?
@PEKAEMEDIA Жыл бұрын
Thanks for the insight new subscriber. Plz want to wether one can use auto tune with this if possible plz. Thanks for feedback
@mentalprogram5256 Жыл бұрын
I had to set the speed to 1.5 so you would sound like a normal person not a slowmotion person.
@salvatorecangialosi32642 жыл бұрын
Rlp
@DM-xl4le2 жыл бұрын
Damnnnn that’s hot! 🔥 Great job brother
@CMEPro2 жыл бұрын
Thanks for using our WIDI products. <3
@lazzietchapo97972 жыл бұрын
Next tim try to play bass properly but the compression its good
@lattieboyjohn2 жыл бұрын
hey thks for your comment, you made me laugh on that one. Why you feel i didn't play the bass properly, wasn't trying to play a song basically fooling around for sound check purposes.
@lazzietchapo97972 жыл бұрын
Heavy ting
@kolawoleayodeji2 жыл бұрын
Great stuffs there. Can you please share the scene?
@djlionel93672 жыл бұрын
Impressive. Like this video and would like your help to set up something similar. I have an X-Air 18 with a 2018 MacBook Pro. Please help
@lattieboyjohn2 жыл бұрын
What would you like help with?
@djlionel93672 жыл бұрын
@@lattieboyjohn the whole set up from start to finish. I’m a novice to sound but started doing karaoke and is looking to take my set up to the next level
@lattieboyjohn2 жыл бұрын
@@djlionel9367 Are you using the XR18 as your main mixer for your karoake gig? If that is the case its good to know it very well, in the event you have connection issues connecting or drop out lost of wifi. However the internal effects are more than sufficient for vocals especially reverbs and delays.
@djlionel93672 жыл бұрын
@@lattieboyjohn I use it wired now as the wireless option has failed me in the past
@djlionel93672 жыл бұрын
@@lattieboyjohn yes I am. I also use it for a open mic night I host once a week too. I’m just running the mixer straight and want to add some spice to it